AnasSarkiz/NEMA14_RP2040
A NEMA stepper motor assembly concept with a controller board, proposed M3 screws and spacers, four motor leads with insulated splices, and a JST 4-pin connector harness.
- Version
- 1.12.2
- License
- ISC
- Stars
- 0
Files in (root)/docs
- history
- ai-review-assessment.md
- cloud-start.md
- electrical.md
- engineering-fixes.md
- firmware-interface.md
- jlcpcb-order-review.md
- jst-restoration.md
- mounting-usb-verification.md
- opposite-edge-review.md
- publication-verification.md
- publishing.md
- reference-feedback.md
- resistor-edge-clearance.md
- routing.md
- schematic-pin-alignment.md
- schematic-verification.md
- sources.md
- supplier-cad.md
- top-assembly.md
- usb-programming.md
- validation.md
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.