AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
docs/publishing.md
> Historical baseline document: this predates the opposite-edge v1.11.0 draft. See [current draft and blockers](opposite-edge-review.md) for current evidence.
# Publishing the validated prototype
`npm run publish:tscircuit` gates the frozen saved board, default manufacturing archive and JLCPCB review package before publication. The package includes the saved Circuit JSON and matching native CLI build; publishing preserves routing and changes only supplier CAD URLs to the validated GitHub commit.
The default Gerber archive applies the reviewed assembly, stencil and silkscreen policies. Upstream CLI output remains a diagnostic file. See [engineering fixes](engineering-fixes.md) and the hash-bound validation receipts for current results.
Supplier placement/process approval, verified stackup, firmware/bench qualification and rear motor mounting evidence remain pending. A prototype publication does not approve a manufacturing order.
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.