AnasSarkiz/NEMA14_RP2040
A NEMA stepper motor assembly concept with a controller board, proposed M3 screws and spacers, four motor leads with insulated splices, and a JST 4-pin connector harness.
- Version
- 1.12.2
- License
- ISC
- Stars
- 0
Files in (root)/artifacts
- edge-resistors
- engineering-fixes
- jlcpcb-review
- jst-restoration
- manufacturing
- mechanical
- opposite-edge
- reference-feedback
- schematic-pin-alignment
- schematic-redesign
- top-assembly
- upright-revision
- validation-resume
- board.circuit.json
- bom.csv
- check-output.txt
- drc-report.json
- jlcpcb-import-report.json
- mount-drill-verification.json
- mounting-change-proof.json
- native-check.txt
- nema14-gerbers.zip
- physical-connectivity.json
- pick_and_place.csv
- presentation-verification.json
- publication-provenance.json
- resume-validation.json
- same-side-copper-cleanup.json
- same-side-copper-repairs.json
- same-side-power-width-repair.json
- same-side-pruned-stubs.json
- same-side-routing-proof.json
- same-side-trimmed-stubs.json
- schematic-a4-page-01.png
- schematic-a4-page-01.svg
- schematic-a4-page-02.png
- schematic-a4-page-02.svg
- schematic-a4-page-03.png
- schematic-a4-page-03.svg
- schematic-a4-page-04.png
- schematic-a4-page-04.svg
- schematic-a4-page-05.png
- schematic-a4-page-05.svg
- schematic-a4-page-06.png
- schematic-a4-page-06.svg
- schematic-a4.pdf
- schematic-a4.png
- schematic.svg
- shorts-output.txt
- trace-width-review.json
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.