AnasSarkiz/NEMA14_RP2040

artifacts/resume-validation.json

PCB

Schematic

{
  "board_sha256": "16a605a565a272ce12a5194f28e1d9d8359c183d6110d117a4771d2b8ec91d2d",
  "checks": [
    {
      "check": "all_resistor_edge_clearances",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/check-resistor-edges.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/all_resistor_edge_clearances.txt"
    },
    {
      "check": "typescript",
      "command": [
        "tsc",
        "--noEmit"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/typescript.txt"
    },
    {
      "check": "drc",
      "command": [
        "bun",
        "scripts/check.ts"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/drc.txt"
    },
    {
      "check": "connectivity",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/verify_supplier_connectivity.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/connectivity.txt"
    },
    {
      "check": "fitted_JST_and_actual_drills",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/check-motor-connector.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/fitted_JST_and_actual_drills.txt"
    },
    {
      "check": "exact_mounts_and_actual_drills",
      "command": [
        "python3",
        "scripts/check-mount-drills.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/exact_mounts_and_actual_drills.txt"
    },
    {
      "check": "native_json_checks",
      "command": [
        "tsci",
        "check",
        "artifacts/board.circuit.json"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/native_json_checks.txt"
    },
    {
      "check": "native_netlist",
      "command": [
        "tsci",
        "check",
        "netlist",
        "scripts/netlist-source.circuit.tsx"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/native_netlist.txt"
    },
    {
      "check": "native_pin_specification",
      "command": [
        "tsci",
        "check",
        "pin_specification",
        "artifacts/board.circuit.json"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/native_pin_specification.txt"
    },
    {
      "check": "native_source",
      "command": [
        "tsci",
        "check",
        "source",
        "artifacts/board.circuit.json"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/native_source.txt"
    },
    {
      "check": "native_schematic-placement",
      "command": [
        "tsci",
        "check",
        "schematic-placement",
        "artifacts/board.circuit.json"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/native_schematic-placement.txt"
    },
    {
      "check": "native_placement",
      "command": [
        "tsci",
        "check",
        "placement",
        "artifacts/board.circuit.json"
      ],
      "exit_code": 1,
      "log": "artifacts/validation-resume/native_placement.txt"
    },
    {
      "check": "strict_Circuit_JSON_schema",
      "command": [
        "node",
        "scripts/check-native-schema.mjs"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/strict_Circuit_JSON_schema.txt"
    },
    {
      "check": "USB_coupled_copper_and_ground_reference",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/check-usb-reference.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/USB_coupled_copper_and_ground_reference.txt"
    },
    {
      "check": "schematic_geometry_ERC",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/verify-schematic.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/schematic_geometry_ERC.txt"
    },
    {
      "check": "every_trace_review",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/audit-every-trace.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/every_trace_review.txt"
    },
    {
      "check": "reference_feedback",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/check-reference-feedback.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/reference_feedback.txt"
    },
    {
      "check": "gerber_shorts",
      "command": [
        "tsci",
        "check",
        "shorts",
        "artifacts/board.circuit.json",
        "--mode",
        "gerber",
        "--layer",
        "all",
        "--pixels-per-mm",
        "100"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/gerber_shorts.txt"
    },
    {
      "check": "copper_widths",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/audit-trace-widths.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/copper_widths.txt"
    },
    {
      "check": "full_independent_CAM",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/audit-manufacturing.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/full_independent_CAM.txt"
    },
    {
      "check": "native_circular_keepout_regression",
      "command": [
        "bun",
        "scripts/check-circle-regression.ts"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/native_circular_keepout_regression.txt"
    },
    {
      "check": "actual_via_drills_and_JLCPCB_clearances",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/audit-via-fabrication.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/actual_via_drills_and_JLCPCB_clearances.txt"
    },
    {
      "check": "oscillator_layout",
      "command": [
        "/workspace/.routing-venv/bin/python",
        "scripts/audit-oscillator-layout.py"
      ],
      "exit_code": 0,
      "log": "artifacts/validation-resume/oscillator_layout.txt",
      "rechecked_at_utc": "2026-10-16T20:26:55.251431+00:00",
      "recheck_reason": "Restored omitted plan metadata from the frozen baseline and unchanged route construction policy; reran the actual oscillator audit."
    }
  ],
  "native_STEP_mechanical_pass": true,
  "CAD_models_checked": 82,
  "physical_nets_checked": 64,
  "counts": {
    "pcb_trace": 536,
    "pcb_via": 329,
    "pcb_copper_pour": 48
  },
  "full_CAM_status": "PASS",
  "remaining_CAM_findings": [],
  "rear_motor_compatibility_verified": false,
  "prototype_fabrication_ready": false,
  "physical_hardware_tested": false
}