AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
Files in (root)/artifacts/jst-restoration
- baseline.json
- connector-verification.json
- initial-source-mount-usb-screen.json
- local-ripup.json
- R_SA-fanout-spacing.json
- rebuilt-b-minus-escape.json
- rebuilt-enable-escape.json
- rebuilt-sense1-fanout.json
- removed-primary-PD-feeder.json
- restored-baseline-control-fanout.json
- sense2-straight-fanout.json
- unique-route-identities.json
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.