AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
Files in (root)/artifacts/reference-feedback
- baseline.json
- circuit-verification.json
- close-drill-pruning.json
- controlled-pad-escapes.json
- copper-source-identities.json
- courtyard-placement.json
- every-trace-review.csv
- every-trace-review.json
- final-power-width-corrections.json
- forced-ground-ports.json
- ground-escapes.json
- ground-stitching.json
- local-inner1-escapes.json
- local-power-bridges.json
- preserved-electrical-interfaces.json
- redundant-signal-and-supply-copper.json
- reserved-ic-fanouts.json
- selective-placement-merges.json
- via-cage-repairs.json
- via-contact-normalization.json
- widened-usb-supply-reroute.json
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.