AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
Files in (root)/artifacts/validation-resume
- actual_via_drills_and_JLCPCB_clearances.txt
- all_resistor_edge_clearances.txt
- connectivity.txt
- copper_widths.txt
- drc.txt
- every_trace_review.txt
- exact_mounts_and_actual_drills.txt
- final-all-required-checks.txt
- final-default-and-order-manufacturing-export.txt
- final-mechanical-diagram.txt
- final-native-STEP-mechanical.txt
- final-order-CAM.txt
- final-package-JLCPCB-review.txt
- final-preservation.txt
- final-schematic-PCB-renders.txt
- final-six-sheet-PDF.txt
- final-verify-JLCPCB-review.txt
- fitted_JST_and_actual_drills.txt
- full_independent_CAM.txt
- gerber_shorts.txt
- native_circular_keepout_regression.txt
- native_json_checks.txt
- native_netlist.txt
- native_pin_specification.txt
- native_placement.txt
- native_schematic-placement.txt
- native_source.txt
- oscillator_layout.txt
- reference_feedback.txt
- schematic_geometry_ERC.txt
- strict_Circuit_JSON_schema.txt
- typescript.txt
- USB_coupled_copper_and_ground_reference.txt
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.