gokul/lora-device
A compact LoRa/GNSS device PCB integrating an SX1262 radio, GNSS module, USB/UART interface, 1.5 µH inductor, LiPo battery connector with NTC, and supporting passives.
- Version
- 0.1.6
- License
- unset
- Stars
- 0
Files in (root)/validation
- logs
- reproductions
- fabrication-report.md
- jlc-default-reproduction.json
- jlcpcb-calculator.png
- jlcpcb-change-audit.json
- jlcpcb-usb-geometry.json
- manufacturer-model-audit.json
- manufacturer-model-conversion.json
- manufacturer-model-sources.json
- rev-c-build.log
- rev-c-change-audit.json
- rev-c-check-results.json
- rev-c-gerber-clearances.json
- rev-c-gerber-connectivity.json
- rev-c-gerber-geometry.json
- rev-c-netlist.log
- rev-c-pcb-style.log
- rev-c-pin_specification.log
- rev-c-placement.log
- rev-c-schematic-placement.log
- rev-c-shorts.log
- rev-c-silkscreen.json
- rev-c-source.log
- rev-c-typecheck.log
- schematic-update.json
- section-update-build-final.log
- section-update-netlist.log
- section-update-pcb-style.log
- section-update-pins.log
- section-update-placement.log
- section-update-schematic-placement.log
- section-update-shorts.log
- section-update-source.log
- section-update-typecheck.log
- SHA256SUMS.txt
- tscircuit-findings.md
Related Packages
More from this authorgokul/acoustic-guitar-tunerThis code defines the physical pin configuration and footprint layouts for the ATtiny1616 microcontroller and a matching tactile switch component, including their key hardware connection points, dimensions, and 3D models.
Similar packagecodezonly/pt1This design implements a compact embedded hardware module combining a Seeed XIAO ESP32-C6 microcontroller, a RushFPV GNSS Mini M10 GPS module, and an SX1262 LoRa transceiver, integrated with USB-C power/data, user interface LEDs and buttons, decoupling capacitors, and antenna connectors for GPS and LoRa communication.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.