gokul/lora-device
A compact LoRa/GNSS device PCB integrating an SX1262 radio, GNSS module, USB/UART interface, 1.5 µH inductor, LiPo battery connector with NTC, and supporting passives.
- Version
- 0.1.6
- License
- unset
- Stars
- 0
validation/section-update-schematic-placement.log
<SchematicBoxPositions>
<SchematicBoxPlacement componentName="C4" positionAnchor="center" schX="-2.394" schY="7.131" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C5" positionAnchor="center" schX="11.458" schY="10.094" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C6" positionAnchor="center" schX="12.903" schY="10.094" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C7" positionAnchor="center" schX="14.408" schY="10.094" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C8" positionAnchor="center" schX="2.506" schY="10.166" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C9" positionAnchor="center" schX="3.951" schY="10.166" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C10" positionAnchor="center" schX="5.396" schY="10.166" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C12" positionAnchor="center" schX="-22.41" schY="-2.191" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C13" positionAnchor="center" schX="-20.905" schY="-2.191" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C14" positionAnchor="center" schX="20.64" schY="0.66" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C15" positionAnchor="center" schX="22.145" schY="0.66" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C16" positionAnchor="center" schX="-8.064" schY="-9.541" width="0.9" height="0.6" />
<SchematicBoxPlacement componentName="C20" positionAnchor="center" schX="7.941" schY="-12.636" width="0.9" height="0.6" />
</SchematicBoxPositions>
<SchematicPlacementIssues>
<DecouplingCapacitorsNotCloseTogether rail="VSYS" ground="GND" capacitorNames="C4, C5, C6, C7" maxBodyGap="13.166" maxRecommendedBodyGap="1" message="Group the decoupling capacitors between VSYS and GND closer together in this schematic block. Preserve their net connections." />
<DecouplingCapacitorsNotCloseTogether rail="V3_3" ground="GND" capacitorNames="C8, C9, C10, C12, C13, C14, C15, C16, C20" maxBodyGap="17.332" maxRecommendedBodyGap="1" message="Group the decoupling capacitors between V3_3 and GND closer together in this schematic block. Preserve their net connections." />
</SchematicPlacementIssues>
Related Packages
More from this authorgokul/acoustic-guitar-tunerThis code defines the physical pin configuration and footprint layouts for the ATtiny1616 microcontroller and a matching tactile switch component, including their key hardware connection points, dimensions, and 3D models.
Similar packagecodezonly/pt1This design implements a compact embedded hardware module combining a Seeed XIAO ESP32-C6 microcontroller, a RushFPV GNSS Mini M10 GPS module, and an SX1262 LoRa transceiver, integrated with USB-C power/data, user interface LEDs and buttons, decoupling capacitors, and antenna connectors for GPS and LoRa communication.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.