gokul/lora-device

validation/jlcpcb-change-audit.json

{
  "source_component": {
    "before": 58,
    "after": 58,
    "identical": true
  },
  "source_port": {
    "before": 303,
    "after": 303,
    "identical": true
  },
  "source_net": {
    "before": 42,
    "after": 42,
    "identical": true
  },
  "pcb_component": {
    "before": 87,
    "after": 87,
    "identical": true
  },
  "pcb_smtpad": {
    "before": 238,
    "after": 238,
    "identical": true
  },
  "pcb_plated_hole": {
    "before": 7,
    "after": 7,
    "identical": true
  },
  "pcb_hole": {
    "before": 2,
    "after": 2,
    "identical": true
  },
  "pcb_board": {
    "before": 1,
    "after": 1,
    "identical": true
  },
  "cad_component": {
    "before": 55,
    "after": 55,
    "identical": true
  },
  "schematicRecordsIdentical": true,
  "pcbErrors": [],
  "warnings": [
    {
      "type": "schematic_missing_sheet_warning",
      "message": "No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area."
    },
    {
      "type": "pcb_trace_warning",
      "message": "Trace [.U6 > .pin6 to .R12 > .pin2] is routed thinner than requested (requested: 0.24mm, actual: 0.2mm)."
    },
    {
      "type": "pcb_trace_warning",
      "message": "Trace [.U6 > .pin4 to .R11 > .pin2] is routed thinner than requested (requested: 0.24mm, actual: 0.2mm)."
    },
    {
      "type": "source_component_availability_warning",
      "message": "U6 may not have availability from jlcpcb (C7519)."
    }
  ],
  "pcb_trace": {
    "before": 176,
    "after": 174
  },
  "pcb_via": {
    "before": 168,
    "after": 166
  }
}