krishnax12/tps2553-usb-power-switch

lib/usb-power-switch-board.tsx

import { TYPE_C_31_M_12 } from "../imports/TYPE_C_31_M_12"
import { TPS2553DBVR } from "../imports/TPS2553DBVR"

export function UsbPowerSwitchBoard() {
  return (
    <board
      width={30}
      height={30}
      layers={2}
      schAutoLayoutEnabled
      schMaxTraceDistance={8}
      autorouter="auto_local"
      minTraceWidth={0.15}
      minTraceToPadEdgeClearance={0.2}
      minViaEdgeToPadEdgeClearance={0.25}
      minTraceToHoleEdgeClearance={0.25}
      nominalTraceWidth={0.25}
      pcbStyle={{
        silkscreenFontSize: 0.7,
        viaHoleDiameter: 0.3,
        viaPadDiameter: 0.6,
      }}
    >
      <net name="V5_IN" isPowerNet nominalTraceWidth={0.4} />
      <net name="V5_OUT" isPowerNet nominalTraceWidth={0.4} />
      <net name="GND" isGroundNet nominalTraceWidth={0.4} />
      <net name="CC1" />
      <net name="CC2" />
      <net name="ENABLE" />
      <net name="N_FAULT" />
      <net name="ILIM" />
      <net name="FAULT_LED" />
      <schematicsheet name="USB_INPUT" displayName="01 - USB-C 5 V input">
        <schematicsection name="USB_INPUT" displayName="01 - USB-C 5 V input" />
        <group
          name="USB_INPUT"
          schAutoLayoutEnabled
          schMarginX={1}
          schMarginY={1}
        >
          <TYPE_C_31_M_12
            name="J1"
            schSectionName="USB_INPUT"
            pcbX={0}
            pcbY={11}
            pcbRotation={180}
            schWidth={1.8}
            schHeight={2.8}
            schPinArrangement={{
              rightSide: [15, 16, 6, 12, 8, 9, 10, 7, 11, 5],
              bottomSide: [13, 14, 2, 1, 4, 3],
            }}
            pinAttributes={{
              DP1: { doNotConnect: true },
              DP2: { doNotConnect: true },
              DN1: { doNotConnect: true },
              DN2: { doNotConnect: true },
              SBU1: { doNotConnect: true },
              SBU2: { doNotConnect: true },
            }}
            connections={{
              VBUS1: "net.V5_IN",
              VBUS2: "net.V5_IN",
              GND1: "net.GND",
              GND2: "net.GND",
              EH1: "net.GND",
              EH2: "net.GND",
              EH3: "net.GND",
              EH4: "net.GND",
              CC1: "net.CC1",
              CC2: "net.CC2",
            }}
          />
          <resistor
            name="R1"
            pcbRotation={180}
            schSectionName="USB_INPUT"
            resistance="5.1k"
            footprint="0603"
            pcbX={-2}
            pcbY={5.8}
            connections={{ pin1: "net.CC1", pin2: "net.GND" }}
          />
          <resistor
            name="R2"
            schSectionName="USB_INPUT"
            resistance="5.1k"
            footprint="0603"
            pcbX={2}
            pcbY={5.8}
            connections={{ pin1: "net.CC2", pin2: "net.GND" }}
          />
        </group>
      </schematicsheet>
      <schematicsheet
        name="POWER_SWITCH"
        displayName="02 - TPS2553 current limiter and output"
      >
        <schematicsection
          name="POWER_SWITCH"
          displayName="02 - TPS2553 current limiter and output"
        />
        <group
          name="POWER_SWITCH"
          schAutoLayoutEnabled
          schMarginX={1}
          schMarginY={1}
        >
          <TPS2553DBVR
            name="U1"
            schSectionName="POWER_SWITCH"
            pcbX={0}
            pcbY={0}
            pcbRotation={90}
            schWidth={1.8}
            schHeight={1.5}
            connections={{
              IN: "net.V5_IN",
              OUT: "net.V5_OUT",
              GND: "net.GND",
              EN: "net.ENABLE",
              N_FAULT: "net.N_FAULT",
              ILIM: "net.ILIM",
            }}
          />
          <capacitor
            name="C1"
            pcbSx={{ "& silkscreentext": { pcbX: 1.8, pcbY: 0 } }}
            schMarginX={1}
            schSectionName="POWER_SWITCH"
            capacitance="100nF"
            footprint="0603"
            pcbX={3}
            pcbY={1.3}
            pcbRotation={90}
            connections={{ pin1: "net.V5_IN", pin2: "net.GND" }}
          />
          <capacitor
            name="C2"
            pcbSx={{ "& silkscreentext": { pcbX: 2.2, pcbY: 0 } }}
            schSectionName="POWER_SWITCH"
            capacitance="1uF"
            footprint="0805"
            pcbX={5.5}
            pcbY={1.3}
            pcbRotation={90}
            connections={{ pin1: "net.V5_IN", pin2: "net.GND" }}
          />
          <resistor
            name="R3"
            schMarginY={0.7}
            schSectionName="POWER_SWITCH"
            resistance="49.9k"
            footprint="0603"
            pcbX={3}
            pcbY={-3}
            connections={{ pin1: "net.ILIM", pin2: "net.GND" }}
          />
          <capacitor
            name="C3"
            schSectionName="POWER_SWITCH"
            capacitance="10uF"
            footprint="0805"
            pcbX={0}
            pcbY={-5.5}
            connections={{ pin1: "net.V5_OUT", pin2: "net.GND" }}
          />
          <capacitor
            name="C4"
            schSectionName="POWER_SWITCH"
            capacitance="100nF"
            footprint="0603"
            pcbX={4}
            pcbY={-5.5}
            connections={{ pin1: "net.V5_OUT", pin2: "net.GND" }}
          />
          <connector
            name="J2"
            schSectionName="POWER_SWITCH"
            manufacturerPartNumber="B2B-XH-A"
            footprint="jst2_p2.5mm_xh"
            pinLabels={{ pin1: "VOUT", pin2: "GND" }}
            schPinArrangement={{ leftSide: ["VOUT", "GND"] }}
            pcbX={0}
            pcbY={-11}
            connections={{ VOUT: "net.V5_OUT", GND: "net.GND" }}
          />
        </group>
      </schematicsheet>
      <schematicsheet
        name="CONTROL_STATUS"
        displayName="03 - Enable and fault status"
      >
        <schematicsection
          name="CONTROL_STATUS"
          displayName="03 - Enable and fault status"
        />
        <group
          name="CONTROL_STATUS"
          schAutoLayoutEnabled
          schMarginX={1}
          schMarginY={1}
        >
          <resistor
            name="R4"
            schSectionName="CONTROL_STATUS"
            resistance="100k"
            footprint="0603"
            pcbX={-5}
            pcbY={1}
            connections={{ pin1: "net.V5_IN", pin2: "net.ENABLE" }}
          />
          <resistor
            name="R5"
            schSectionName="CONTROL_STATUS"
            resistance="10k"
            footprint="0603"
            pcbX={-4}
            pcbY={-3}
            connections={{ pin1: "net.V5_IN", pin2: "net.N_FAULT" }}
          />
          <resistor
            name="R6"
            pcbRotation={180}
            schRotation={0}
            schSectionName="CONTROL_STATUS"
            resistance="2.2k"
            footprint="0603"
            pcbX={-6}
            pcbY={-7}
            connections={{ pin1: "net.V5_IN", pin2: "net.FAULT_LED" }}
          />
          <led
            name="D1"
            schRotation={0}
            schSectionName="CONTROL_STATUS"
            manufacturerPartNumber="LTST-C190KRKT"
            color="red"
            footprint="0603"
            pcbX={-9}
            pcbY={-7}
            connections={{ anode: "net.FAULT_LED", cathode: "net.N_FAULT" }}
          />
          <connector
            name="J3"
            schSectionName="CONTROL_STATUS"
            manufacturerPartNumber="M20-9990345"
            footprint="pinrow3_p2.54mm"
            pinLabels={{ pin1: "EN", pin2: "N_FAULT", pin3: "GND" }}
            schPinArrangement={{ leftSide: ["EN", "N_FAULT", "GND"] }}
            pcbX={-10}
            pcbY={-1}
            pcbRotation={90}
            connections={{
              EN: "net.ENABLE",
              N_FAULT: "net.N_FAULT",
              GND: "net.GND",
            }}
          />
        </group>
      </schematicsheet>
      <silkscreentext text="USB-C 5V INPUT" pcbX={0} pcbY={14} fontSize={0.8} />
      <silkscreentext
        text="TPS2553 / 0.52A"
        pcbX={7}
        pcbY={-11}
        fontSize={0.65}
      />
      <silkscreentext text="5V OUT" pcbX={0} pcbY={-13.5} fontSize={0.7} />
      <silkscreentext text="FAULT" pcbX={-9} pcbY={-9} fontSize={0.6} />
      <silkscreentext
        text="EN  !FLT  GND"
        pcbX={-12.7}
        pcbY={-1}
        pcbRotation={90}
        fontSize={0.6}
      />
    </board>
  )
}