shibosoftwaredev/f1c100s-linux-nema17-stepper-controller

A four-layer NEMA 17 motor-controller PCB combining an Allwinner F1C100S Linux computer, USB‑PD/buck power system, W5500 Ethernet, STM32 real-time motion control, DRV8825 stepper driver, protection/temperature/current telemetry, USB interfaces, and local LED/buzzer diagnostics.

Version
0.4.56
License
unset
Stars
0

imports/INA241B1IDDFR.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["IN_NEG"],
  pin2: ["GND"],
  pin3: ["REF2"],
  pin4: ["NC"],
  pin5: ["OUT"],
  pin6: ["VS"],
  pin7: ["REF1"],
  pin8: ["IN_POS"]
} as const

const pinAttributes = {
  pin2: {requiresGround: true},
  pin6: {requiresPower: true},
  // TI SBOSA30D table 5-1: reserved pin 4 must be grounded, not left open.
  pin4: {requiresGround: true}
} as const

export const INA241B1IDDFR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C7433256"
  ]
}}
      manufacturerPartNumber="INA241B1IDDFR"
      footprint={<footprint>
        <smtpad portHints={["pin8"]} pcbX="-0.974979mm" pcbY="1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin7"]} pcbX="-0.324993mm" pcbY="1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="0.324993mm" pcbY="1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0.974979mm" pcbY="1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.974979mm" pcbY="-1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.324993mm" pcbY="-1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-0.324993mm" pcbY="-1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-0.974979mm" pcbY="-1.259967mm" width="0.4500118mm" height="0.8999982mm" shape="rect" />
<silkscreenpath route={[{"x":1.4500351999998884,"y":-0.7998968000001696},{"x":1.4500351999998884,"y":0.8000999999998157}]} />
<silkscreenpath route={[{"x":-1.4499844000000621,"y":-0.7998968000001696},{"x":-1.334135000000174,"y":-0.7998968000001696}]} />
<silkscreenpath route={[{"x":1.3341857999998865,"y":-0.7998968000001696},{"x":1.4500351999998884,"y":-0.7998968000001696}]} />
<silkscreenpath route={[{"x":-1.4499844000000621,"y":0.8000999999998157},{"x":-1.334135000000174,"y":0.8000999999998157}]} />
<silkscreenpath route={[{"x":1.3341857999998865,"y":0.8000999999998157},{"x":1.4500351999998884,"y":0.8000999999998157}]} />
<silkscreenpath route={[{"x":-1.4499844000000621,"y":0.8000999999998157},{"x":-1.4499844000000621,"y":0.254101599999899}]} />
<silkscreenpath route={[{"x":-1.4499844000000621,"y":-0.7998968000001696},{"x":-1.4499844000000621,"y":-0.2538984000000255}]} />
<silkscreenpath route={[{"x":-1.4499844000000621,"y":0.254101599999899},{"x":-1.2716684622392904,"y":0.17838329744688508},{"x":-1.198234294963072,"y":-0.0008853782258029241},{"x":-1.272186762440242,"y":-0.17994086558951494},{"x":-1.4507210000000441,"y":-0.25514300000031653}]} />
<silkscreencircle pcbX="-1.523873mm" pcbY="-1.270127mm" radius="0.100076mm" />
<silkscreentext text="{NAME}" pcbX="-0.098679mm" pcbY="2.717167mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.6999844000000621,"y":1.9599660999999742},{"x":1.7000097999999753,"y":1.9599660999999742},{"x":1.7000097999999753,"y":-1.9599661000000879},{"x":-1.6999844000000621,"y":-1.9599661000000879},{"x":-1.6999844000000621,"y":1.9599660999999742}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C7433256.obj?uuid=f4961c1aca354ff3a77dcfdea41511db",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C7433256.step?uuid=f4961c1aca354ff3a77dcfdea41511db",
        pcbRotationOffset: 90,
        modelOriginPosition: { x: 0, y: 0.000012699999956566899, z: 0.050795 },
      }}
      {...props}
    />
  )
}