mohan-bee/mini-mp3-player
Portable, battery-powered MP3 player hardware with USB charging, microSD storage, an MCU, VS10xx audio decoder, headphone output, status controls, and regulated power rails.
- Version
- 1.2.0
- License
- unset
- Stars
- 0
firmware/vendor/wch/Peripheral/src/ch32v20x_adc.c
/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v20x_adc.c
* Author : WCH
* Version : V1.0.0
* Date : 2021/06/06
* Description : This file provides all the ADC firmware functions.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#include "ch32v20x_adc.h"
#include "ch32v20x_rcc.h"
/* ADC DISCNUM mask */
#define CTLR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF)
/* ADC DISCEN mask */
#define CTLR1_DISCEN_Set ((uint32_t)0x00000800)
#define CTLR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF)
/* ADC JAUTO mask */
#define CTLR1_JAUTO_Set ((uint32_t)0x00000400)
#define CTLR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF)
/* ADC JDISCEN mask */
#define CTLR1_JDISCEN_Set ((uint32_t)0x00001000)
#define CTLR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF)
/* ADC AWDCH mask */
#define CTLR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0)
/* ADC Analog watchdog enable mode mask */
#define CTLR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF)
/* CTLR1 register Mask */
#define CTLR1_CLEAR_Mask ((uint32_t)0xE0F0FEFF)
/* ADC ADON mask */
#define CTLR2_ADON_Set ((uint32_t)0x00000001)
#define CTLR2_ADON_Reset ((uint32_t)0xFFFFFFFE)
/* ADC DMA mask */
#define CTLR2_DMA_Set ((uint32_t)0x00000100)
#define CTLR2_DMA_Reset ((uint32_t)0xFFFFFEFF)
/* ADC RSTCAL mask */
#define CTLR2_RSTCAL_Set ((uint32_t)0x00000008)
/* ADC CAL mask */
#define CTLR2_CAL_Set ((uint32_t)0x00000004)
/* ADC SWSTART mask */
#define CTLR2_SWSTART_Set ((uint32_t)0x00400000)
/* ADC EXTTRIG mask */
#define CTLR2_EXTTRIG_Set ((uint32_t)0x00100000)
#define CTLR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF)
/* ADC Software start mask */
#define CTLR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000)
#define CTLR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF)
/* ADC JEXTSEL mask */
#define CTLR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF)
/* ADC JEXTTRIG mask */
#define CTLR2_JEXTTRIG_Set ((uint32_t)0x00008000)
#define CTLR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF)
/* ADC JSWSTART mask */
#define CTLR2_JSWSTART_Set ((uint32_t)0x00200000)
/* ADC injected software start mask */
#define CTLR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000)
#define CTLR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF)
/* ADC TSPD mask */
#define CTLR2_TSVREFE_Set ((uint32_t)0x00800000)
#define CTLR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF)
/* CTLR2 register Mask */
#define CTLR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD)
/* ADC SQx mask */
#define RSQR3_SQ_Set ((uint32_t)0x0000001F)
#define RSQR2_SQ_Set ((uint32_t)0x0000001F)
#define RSQR1_SQ_Set ((uint32_t)0x0000001F)
/* RSQR1 register Mask */
#define RSQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF)
/* ADC JSQx mask */
#define ISQR_JSQ_Set ((uint32_t)0x0000001F)
/* ADC JL mask */
#define ISQR_JL_Set ((uint32_t)0x00300000)
#define ISQR_JL_Reset ((uint32_t)0xFFCFFFFF)
/* ADC SMPx mask */
#define SAMPTR1_SMP_Set ((uint32_t)0x00000007)
#define SAMPTR2_SMP_Set ((uint32_t)0x00000007)
/* ADC IDATARx registers offset */
#define IDATAR_Offset ((uint8_t)0x28)
/* ADC1 RDATAR register base address */
#define RDATAR_ADDRESS ((uint32_t)0x4001244C)
/*********************************************************************
* @fn ADC_DeInit
*
* @brief Deinitializes the ADCx peripheral registers to their default
* reset values.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return none
*/
void ADC_DeInit(ADC_TypeDef *ADCx)
{
if(ADCx == ADC1)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
}
else if(ADCx == ADC2)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE);
}
}
/*********************************************************************
* @fn ADC_Init
*
* @brief Initializes the ADCx peripheral according to the specified
* parameters in the ADC_InitStruct.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_InitStruct - pointer to an ADC_InitTypeDef structure that
* contains the configuration information for the specified ADC
* peripheral.
*
* @return none
*/
void ADC_Init(ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct)
{
uint32_t tmpreg1 = 0;
uint8_t tmpreg2 = 0;
tmpreg1 = ADCx->CTLR1;
tmpreg1 &= CTLR1_CLEAR_Mask;
tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | (uint32_t)ADC_InitStruct->ADC_OutputBuffer |
(uint32_t)ADC_InitStruct->ADC_Pga | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8));
ADCx->CTLR1 = tmpreg1;
tmpreg1 = ADCx->CTLR2;
tmpreg1 &= CTLR2_CLEAR_Mask;
tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
ADCx->CTLR2 = tmpreg1;
tmpreg1 = ADCx->RSQR1;
tmpreg1 &= RSQR1_CLEAR_Mask;
tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1);
tmpreg1 |= (uint32_t)tmpreg2 << 20;
ADCx->RSQR1 = tmpreg1;
}
/*********************************************************************
* @fn ADC_StructInit
*
* @brief Fills each ADC_InitStruct member with its default value.
*
* @param ADC_InitStruct - pointer to an ADC_InitTypeDef structure that
* contains the configuration information for the specified ADC
* peripheral.
*
* @return none
*/
void ADC_StructInit(ADC_InitTypeDef *ADC_InitStruct)
{
ADC_InitStruct->ADC_Mode = ADC_Mode_Independent;
ADC_InitStruct->ADC_ScanConvMode = DISABLE;
ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;
ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStruct->ADC_NbrOfChannel = 1;
}
/*********************************************************************
* @fn ADC_Cmd
*
* @brief Enables or disables the specified ADC peripheral.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void ADC_Cmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR2 |= CTLR2_ADON_Set;
}
else
{
ADCx->CTLR2 &= CTLR2_ADON_Reset;
}
}
/*********************************************************************
* @fn ADC_DMACmd
*
* @brief Enables or disables the specified ADC DMA request.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void ADC_DMACmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR2 |= CTLR2_DMA_Set;
}
else
{
ADCx->CTLR2 &= CTLR2_DMA_Reset;
}
}
/*********************************************************************
* @fn ADC_ITConfig
*
* @brief Enables or disables the specified ADC interrupts.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_IT - specifies the ADC interrupt sources to be enabled or disabled.
* ADC_IT_EOC - End of conversion interrupt mask.
* ADC_IT_AWD - Analog watchdog interrupt mask.
* ADC_IT_JEOC - End of injected conversion interrupt mask.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void ADC_ITConfig(ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState)
{
uint8_t itmask = 0;
itmask = (uint8_t)ADC_IT;
if(NewState != DISABLE)
{
ADCx->CTLR1 |= itmask;
}
else
{
ADCx->CTLR1 &= (~(uint32_t)itmask);
}
}
/*********************************************************************
* @fn ADC_ResetCalibration
*
* @brief Resets the selected ADC calibration registers.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return none
*/
void ADC_ResetCalibration(ADC_TypeDef *ADCx)
{
ADCx->CTLR2 |= CTLR2_RSTCAL_Set;
}
/*********************************************************************
* @fn ADC_GetResetCalibrationStatus
*
* @brief Gets the selected ADC reset calibration registers status.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return FlagStatus: SET or RESET.
*/
FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef *ADCx)
{
FlagStatus bitstatus = RESET;
if((ADCx->CTLR2 & CTLR2_RSTCAL_Set) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn ADC_StartCalibration
*
* @brief Starts the selected ADC calibration process.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return None
*/
void ADC_StartCalibration(ADC_TypeDef *ADCx)
{
ADCx->CTLR2 |= CTLR2_CAL_Set;
}
/*********************************************************************
* @fn ADC_GetCalibrationStatus
*
* @brief Gets the selected ADC calibration status.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return FlagStatus: SET or RESET.
*/
FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef *ADCx)
{
FlagStatus bitstatus = RESET;
if((ADCx->CTLR2 & CTLR2_CAL_Set) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn ADC_SoftwareStartConvCmd
*
* @brief Enables or disables the selected ADC software start conversion.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_SoftwareStartConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR2 |= CTLR2_EXTTRIG_SWSTART_Set;
}
else
{
ADCx->CTLR2 &= CTLR2_EXTTRIG_SWSTART_Reset;
}
}
/*********************************************************************
* @fn ADC_GetSoftwareStartConvStatus
*
* @brief Gets the selected ADC Software start conversion Status.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return FlagStatus - SET or RESET.
*/
FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef *ADCx)
{
FlagStatus bitstatus = RESET;
if((ADCx->CTLR2 & CTLR2_SWSTART_Set) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn ADC_DiscModeChannelCountConfig
*
* @brief Configures the discontinuous mode for the selected ADC regular
* group channel.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* Number - specifies the discontinuous mode regular channel
* count value(1-8).
*
* @return None
*/
void ADC_DiscModeChannelCountConfig(ADC_TypeDef *ADCx, uint8_t Number)
{
uint32_t tmpreg1 = 0;
uint32_t tmpreg2 = 0;
tmpreg1 = ADCx->CTLR1;
tmpreg1 &= CTLR1_DISCNUM_Reset;
tmpreg2 = Number - 1;
tmpreg1 |= tmpreg2 << 13;
ADCx->CTLR1 = tmpreg1;
}
/*********************************************************************
* @fn ADC_DiscModeCmd
*
* @brief Enables or disables the discontinuous mode on regular group
* channel for the specified ADC.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_DiscModeCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR1 |= CTLR1_DISCEN_Set;
}
else
{
ADCx->CTLR1 &= CTLR1_DISCEN_Reset;
}
}
/*********************************************************************
* @fn ADC_RegularChannelConfig
*
* @brief Configures for the selected ADC regular channel its corresponding
* rank in the sequencer and its sample time.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_Channel - the ADC channel to configure.
* ADC_Channel_0 - ADC Channel0 selected.
* ADC_Channel_1 - ADC Channel1 selected.
* ADC_Channel_2 - ADC Channel2 selected.
* ADC_Channel_3 - ADC Channel3 selected.
* ADC_Channel_4 - ADC Channel4 selected.
* ADC_Channel_5 - ADC Channel5 selected.
* ADC_Channel_6 - ADC Channel6 selected.
* ADC_Channel_7 - ADC Channel7 selected.
* ADC_Channel_8 - ADC Channel8 selected.
* ADC_Channel_9 - ADC Channel9 selected.
* ADC_Channel_10 - ADC Channel10 selected.
* ADC_Channel_11 - ADC Channel11 selected.
* ADC_Channel_12 - ADC Channel12 selected.
* ADC_Channel_13 - ADC Channel13 selected.
* ADC_Channel_14 - ADC Channel14 selected.
* ADC_Channel_15 - ADC Channel15 selected.
* ADC_Channel_16 - ADC Channel16 selected.
* ADC_Channel_17 - ADC Channel17 selected.
* Rank - The rank in the regular group sequencer.
* This parameter must be between 1 to 16.
* ADC_SampleTime - The sample time value to be set for the selected channel.
* ADC_SampleTime_1Cycles5 - Sample time equal to 1.5 cycles.
* ADC_SampleTime_7Cycles5 - Sample time equal to 7.5 cycles.
* ADC_SampleTime_13Cycles5 - Sample time equal to 13.5 cycles.
* ADC_SampleTime_28Cycles5 - Sample time equal to 28.5 cycles.
* ADC_SampleTime_41Cycles5 - Sample time equal to 41.5 cycles.
* ADC_SampleTime_55Cycles5 - Sample time equal to 55.5 cycles.
* ADC_SampleTime_71Cycles5 - Sample time equal to 71.5 cycles.
* ADC_SampleTime_239Cycles5 - Sample time equal to 239.5 cycles.
*
* @return None
*/
void ADC_RegularChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
{
uint32_t tmpreg1 = 0, tmpreg2 = 0;
if(ADC_Channel > ADC_Channel_9)
{
tmpreg1 = ADCx->SAMPTR1;
tmpreg2 = SAMPTR1_SMP_Set << (3 * (ADC_Channel - 10));
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
tmpreg1 |= tmpreg2;
ADCx->SAMPTR1 = tmpreg1;
}
else
{
tmpreg1 = ADCx->SAMPTR2;
tmpreg2 = SAMPTR2_SMP_Set << (3 * ADC_Channel);
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
tmpreg1 |= tmpreg2;
ADCx->SAMPTR2 = tmpreg1;
}
if(Rank < 7)
{
tmpreg1 = ADCx->RSQR3;
tmpreg2 = RSQR3_SQ_Set << (5 * (Rank - 1));
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1));
tmpreg1 |= tmpreg2;
ADCx->RSQR3 = tmpreg1;
}
else if(Rank < 13)
{
tmpreg1 = ADCx->RSQR2;
tmpreg2 = RSQR2_SQ_Set << (5 * (Rank - 7));
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7));
tmpreg1 |= tmpreg2;
ADCx->RSQR2 = tmpreg1;
}
else
{
tmpreg1 = ADCx->RSQR1;
tmpreg2 = RSQR1_SQ_Set << (5 * (Rank - 13));
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13));
tmpreg1 |= tmpreg2;
ADCx->RSQR1 = tmpreg1;
}
}
/*********************************************************************
* @fn ADC_ExternalTrigConvCmd
*
* @brief Enables or disables the ADCx conversion through external trigger.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_ExternalTrigConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR2 |= CTLR2_EXTTRIG_Set;
}
else
{
ADCx->CTLR2 &= CTLR2_EXTTRIG_Reset;
}
}
/*********************************************************************
* @fn ADC_GetConversionValue
*
* @brief Returns the last ADCx conversion result data for regular channel.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return ADCx->RDATAR - The Data conversion value.
*/
uint16_t ADC_GetConversionValue(ADC_TypeDef *ADCx)
{
return (uint16_t)ADCx->RDATAR;
}
/*********************************************************************
* @fn ADC_GetDualModeConversionValue
*
* @brief Returns the last ADC1 and ADC2 conversion result data in dual mode.
*
* @return RDATAR_ADDRESS - The Data conversion value.
*/
uint32_t ADC_GetDualModeConversionValue(void)
{
return (*(__IO uint32_t *)RDATAR_ADDRESS);
}
/*********************************************************************
* @fn ADC_AutoInjectedConvCmd
*
* @brief Enables or disables the selected ADC automatic injected group
* conversion after regular one.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_AutoInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR1 |= CTLR1_JAUTO_Set;
}
else
{
ADCx->CTLR1 &= CTLR1_JAUTO_Reset;
}
}
/*********************************************************************
* @fn ADC_InjectedDiscModeCmd
*
* @brief Enables or disables the discontinuous mode for injected group
* channel for the specified ADC.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_InjectedDiscModeCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR1 |= CTLR1_JDISCEN_Set;
}
else
{
ADCx->CTLR1 &= CTLR1_JDISCEN_Reset;
}
}
/*********************************************************************
* @fn ADC_ExternalTrigInjectedConvConfig
*
* @brief Configures the ADCx external trigger for injected channels conversion.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_ExternalTrigInjecConv - specifies the ADC trigger to start
* injected conversion.
* ADC_ExternalTrigInjecConv_T1_TRGO - Timer1 TRGO event selected.
* ADC_ExternalTrigInjecConv_T1_CC4 - Timer1 capture compare4 selected.
* ADC_ExternalTrigInjecConv_T2_TRGO - Timer2 TRGO event selected.
* ADC_ExternalTrigInjecConv_T2_CC1 - Timer2 capture compare1 selected.
* ADC_ExternalTrigInjecConv_T3_CC4 - Timer3 capture compare4 selected.
* ADC_ExternalTrigInjecConv_T4_TRGO - Timer4 TRGO event selected.
* ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 - External interrupt
* line 15 event selected.
* ADC_ExternalTrigInjecConv_None: Injected conversion started
* by software and not by external trigger.
*
* @return None
*/
void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv)
{
uint32_t tmpreg = 0;
tmpreg = ADCx->CTLR2;
tmpreg &= CTLR2_JEXTSEL_Reset;
tmpreg |= ADC_ExternalTrigInjecConv;
ADCx->CTLR2 = tmpreg;
}
/*********************************************************************
* @fn ADC_ExternalTrigInjectedConvCmd
*
* @brief Enables or disables the ADCx injected channels conversion through
* external trigger.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR2 |= CTLR2_JEXTTRIG_Set;
}
else
{
ADCx->CTLR2 &= CTLR2_JEXTTRIG_Reset;
}
}
/*********************************************************************
* @fn ADC_SoftwareStartInjectedConvCmd
*
* @brief Enables or disables the selected ADC start of the injected
* channels conversion.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return None
*/
void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR2 |= CTLR2_JEXTTRIG_JSWSTART_Set;
}
else
{
ADCx->CTLR2 &= CTLR2_JEXTTRIG_JSWSTART_Reset;
}
}
/*********************************************************************
* @fn ADC_GetSoftwareStartInjectedConvCmdStatus
*
* @brief Gets the selected ADC Software start injected conversion Status.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return FlagStatus: SET or RESET.
*/
FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef *ADCx)
{
FlagStatus bitstatus = RESET;
if((ADCx->CTLR2 & CTLR2_JSWSTART_Set) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn ADC_InjectedChannelConfig
*
* @brief Configures for the selected ADC injected channel its corresponding
* rank in the sequencer and its sample time.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_Channel - the ADC channel to configure.
* ADC_Channel_0 - ADC Channel0 selected.
* ADC_Channel_1 - ADC Channel1 selected.
* ADC_Channel_2 - ADC Channel2 selected.
* ADC_Channel_3 - ADC Channel3 selected.
* ADC_Channel_4 - ADC Channel4 selected.
* ADC_Channel_5 - ADC Channel5 selected.
* ADC_Channel_6 - ADC Channel6 selected.
* ADC_Channel_7 - ADC Channel7 selected.
* ADC_Channel_8 - ADC Channel8 selected.
* ADC_Channel_9 - ADC Channel9 selected.
* ADC_Channel_10 - ADC Channel10 selected.
* ADC_Channel_11 - ADC Channel11 selected.
* ADC_Channel_12 - ADC Channel12 selected.
* ADC_Channel_13 - ADC Channel13 selected.
* ADC_Channel_14 - ADC Channel14 selected.
* ADC_Channel_15 - ADC Channel15 selected.
* ADC_Channel_16 - ADC Channel16 selected.
* ADC_Channel_17 - ADC Channel17 selected.
* Rank - The rank in the regular group sequencer.
* This parameter must be between 1 to 4.
* ADC_SampleTime - The sample time value to be set for the selected channel.
* ADC_SampleTime_1Cycles5 - Sample time equal to 1.5 cycles.
* ADC_SampleTime_7Cycles5 - Sample time equal to 7.5 cycles.
* ADC_SampleTime_13Cycles5 - Sample time equal to 13.5 cycles.
* ADC_SampleTime_28Cycles5 - Sample time equal to 28.5 cycles.
* ADC_SampleTime_41Cycles5 - Sample time equal to 41.5 cycles.
* ADC_SampleTime_55Cycles5 - Sample time equal to 55.5 cycles.
* ADC_SampleTime_71Cycles5 - Sample time equal to 71.5 cycles.
* ADC_SampleTime_239Cycles5 - Sample time equal to 239.5 cycles.
*
* @return None
*/
void ADC_InjectedChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
{
uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0;
if(ADC_Channel > ADC_Channel_9)
{
tmpreg1 = ADCx->SAMPTR1;
tmpreg2 = SAMPTR1_SMP_Set << (3 * (ADC_Channel - 10));
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
tmpreg1 |= tmpreg2;
ADCx->SAMPTR1 = tmpreg1;
}
else
{
tmpreg1 = ADCx->SAMPTR2;
tmpreg2 = SAMPTR2_SMP_Set << (3 * ADC_Channel);
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
tmpreg1 |= tmpreg2;
ADCx->SAMPTR2 = tmpreg1;
}
tmpreg1 = ADCx->ISQR;
tmpreg3 = (tmpreg1 & ISQR_JL_Set) >> 20;
tmpreg2 = ISQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
tmpreg1 &= ~tmpreg2;
tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
tmpreg1 |= tmpreg2;
ADCx->ISQR = tmpreg1;
}
/*********************************************************************
* @fn ADC_InjectedSequencerLengthConfig
*
* @brief Configures the sequencer length for injected channels.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* Length - The sequencer length.
* This parameter must be a number between 1 to 4.
*
* @return None
*/
void ADC_InjectedSequencerLengthConfig(ADC_TypeDef *ADCx, uint8_t Length)
{
uint32_t tmpreg1 = 0;
uint32_t tmpreg2 = 0;
tmpreg1 = ADCx->ISQR;
tmpreg1 &= ISQR_JL_Reset;
tmpreg2 = Length - 1;
tmpreg1 |= tmpreg2 << 20;
ADCx->ISQR = tmpreg1;
}
/*********************************************************************
* @fn ADC_SetInjectedOffset
*
* @brief Set the injected channels conversion value offset.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_InjectedChannel: the ADC injected channel to set its offset.
* ADC_InjectedChannel_1 - Injected Channel1 selected.
* ADC_InjectedChannel_2 - Injected Channel2 selected.
* ADC_InjectedChannel_3 - Injected Channel3 selected.
* ADC_InjectedChannel_4 - Injected Channel4 selected.
* Offset - the offset value for the selected ADC injected channel.
* This parameter must be a 12bit value.
*
* @return None
*/
void ADC_SetInjectedOffset(ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
{
__IO uint32_t tmp = 0;
tmp = (uint32_t)ADCx;
tmp += ADC_InjectedChannel;
*(__IO uint32_t *)tmp = (uint32_t)Offset;
}
/*********************************************************************
* @fn ADC_GetInjectedConversionValue
*
* @brief Returns the ADC injected channel conversion result.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_InjectedChannel - the ADC injected channel to set its offset.
* ADC_InjectedChannel_1 - Injected Channel1 selected.
* ADC_InjectedChannel_2 - Injected Channel2 selected.
* ADC_InjectedChannel_3 - Injected Channel3 selected.
* ADC_InjectedChannel_4 - Injected Channel4 selected.
*
* @return tmp - The Data conversion value.
*/
uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel)
{
__IO uint32_t tmp = 0;
tmp = (uint32_t)ADCx;
tmp += ADC_InjectedChannel + IDATAR_Offset;
return (uint16_t)(*(__IO uint32_t *)tmp);
}
/*********************************************************************
* @fn ADC_AnalogWatchdogCmd
*
* @brief Enables or disables the analog watchdog on single/all regular
* or injected channels.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_AnalogWatchdog - the ADC analog watchdog configuration.
* ADC_AnalogWatchdog_SingleRegEnable - Analog watchdog on a
* single regular channel.
* ADC_AnalogWatchdog_SingleInjecEnable - Analog watchdog on a
* single injected channel.
* ADC_AnalogWatchdog_SingleRegOrInjecEnable - Analog watchdog
* on a single regular or injected channel.
* ADC_AnalogWatchdog_AllRegEnable - Analog watchdog on all
* regular channel.
* ADC_AnalogWatchdog_AllInjecEnable - Analog watchdog on all
* injected channel.
* ADC_AnalogWatchdog_AllRegAllInjecEnable - Analog watchdog on
* all regular and injected channels.
* ADC_AnalogWatchdog_None - No channel guarded by the analog
* watchdog.
*
* @return none
*/
void ADC_AnalogWatchdogCmd(ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)
{
uint32_t tmpreg = 0;
tmpreg = ADCx->CTLR1;
tmpreg &= CTLR1_AWDMode_Reset;
tmpreg |= ADC_AnalogWatchdog;
ADCx->CTLR1 = tmpreg;
}
/*********************************************************************
* @fn ADC_AnalogWatchdogThresholdsConfig
*
* @brief Configures the high and low thresholds of the analog watchdog.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* HighThreshold - the ADC analog watchdog High threshold value.
* This parameter must be a 12bit value.
* LowThreshold - the ADC analog watchdog Low threshold value.
* This parameter must be a 12bit value.
*
* @return none
*/
void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef *ADCx, uint16_t HighThreshold,
uint16_t LowThreshold)
{
ADCx->WDHTR = HighThreshold;
ADCx->WDLTR = LowThreshold;
}
/*********************************************************************
* @fn ADC_AnalogWatchdogSingleChannelConfig
*
* @brief Configures the analog watchdog guarded single channel.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_Channel - the ADC channel to configure.
* ADC_Channel_0 - ADC Channel0 selected.
* ADC_Channel_1 - ADC Channel1 selected.
* ADC_Channel_2 - ADC Channel2 selected.
* ADC_Channel_3 - ADC Channel3 selected.
* ADC_Channel_4 - ADC Channel4 selected.
* ADC_Channel_5 - ADC Channel5 selected.
* ADC_Channel_6 - ADC Channel6 selected.
* ADC_Channel_7 - ADC Channel7 selected.
* ADC_Channel_8 - ADC Channel8 selected.
* ADC_Channel_9 - ADC Channel9 selected.
* ADC_Channel_10 - ADC Channel10 selected.
* ADC_Channel_11 - ADC Channel11 selected.
* ADC_Channel_12 - ADC Channel12 selected.
* ADC_Channel_13 - ADC Channel13 selected.
* ADC_Channel_14 - ADC Channel14 selected.
* ADC_Channel_15 - ADC Channel15 selected.
* ADC_Channel_16 - ADC Channel16 selected.
* ADC_Channel_17 - ADC Channel17 selected.
*
* @return None
*/
void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel)
{
uint32_t tmpreg = 0;
tmpreg = ADCx->CTLR1;
tmpreg &= CTLR1_AWDCH_Reset;
tmpreg |= ADC_Channel;
ADCx->CTLR1 = tmpreg;
}
/*********************************************************************
* @fn ADC_TempSensorVrefintCmd
*
* @brief Enables or disables the temperature sensor and Vrefint channel.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void ADC_TempSensorVrefintCmd(FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADC1->CTLR2 |= CTLR2_TSVREFE_Set;
}
else
{
ADC1->CTLR2 &= CTLR2_TSVREFE_Reset;
}
}
/*********************************************************************
* @fn ADC_GetFlagStatus
*
* @brief Checks whether the specified ADC flag is set or not.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_FLAG - specifies the flag to check.
* ADC_FLAG_AWD - Analog watchdog flag.
* ADC_FLAG_EOC - End of conversion flag.
* ADC_FLAG_JEOC - End of injected group conversion flag.
* ADC_FLAG_JSTRT - Start of injected group conversion flag.
* ADC_FLAG_STRT - Start of regular group conversion flag.
*
* @return FlagStatus: SET or RESET.
*/
FlagStatus ADC_GetFlagStatus(ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
{
FlagStatus bitstatus = RESET;
if((ADCx->STATR & ADC_FLAG) != (uint8_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn ADC_ClearFlag
*
* @brief Clears the ADCx's pending flags.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_FLAG - specifies the flag to clear.
* ADC_FLAG_AWD - Analog watchdog flag.
* ADC_FLAG_EOC - End of conversion flag.
* ADC_FLAG_JEOC - End of injected group conversion flag.
* ADC_FLAG_JSTRT - Start of injected group conversion flag.
* ADC_FLAG_STRT - Start of regular group conversion flag.
*
* @return none
*/
void ADC_ClearFlag(ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
{
ADCx->STATR = ~(uint32_t)ADC_FLAG;
}
/*********************************************************************
* @fn ADC_GetITStatus
*
* @brief Checks whether the specified ADC interrupt has occurred or not.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_IT - specifies the ADC interrupt source to check.
* ADC_IT_EOC - End of conversion interrupt mask.
* ADC_IT_AWD - Analog watchdog interrupt mask.
* ADC_IT_JEOC - End of injected conversion interrupt mask.
*
* @return FlagStatus: SET or RESET.
*/
ITStatus ADC_GetITStatus(ADC_TypeDef *ADCx, uint16_t ADC_IT)
{
ITStatus bitstatus = RESET;
uint32_t itmask = 0, enablestatus = 0;
itmask = ADC_IT >> 8;
enablestatus = (ADCx->CTLR1 & (uint8_t)ADC_IT);
if(((ADCx->STATR & itmask) != (uint32_t)RESET) && enablestatus)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn ADC_ClearITPendingBit
*
* @brief Clears the ADCx's interrupt pending bits.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* ADC_IT - specifies the ADC interrupt pending bit to clear.
* ADC_IT_EOC - End of conversion interrupt mask.
* ADC_IT_AWD - Analog watchdog interrupt mask.
* ADC_IT_JEOC - End of injected conversion interrupt mask.
*
* @return none
*/
void ADC_ClearITPendingBit(ADC_TypeDef *ADCx, uint16_t ADC_IT)
{
uint8_t itmask = 0;
itmask = (uint8_t)(ADC_IT >> 8);
ADCx->STATR = ~(uint32_t)itmask;
}
/*********************************************************************
* @fn TempSensor_Volt_To_Temper
*
* @brief Internal Temperature Sensor Voltage to temperature.
*
* @param Value - Voltage Value(mv).
*
* @return Temper - Temperature Value.
*/
s32 TempSensor_Volt_To_Temper(s32 Value)
{
s32 Temper, Refer_Volt, Refer_Temper;
s32 k = 43;
Refer_Volt = (s32)((*(u32 *)0x1FFFF720) & 0x0000FFFF);
Refer_Temper = (s32)(((*(u32 *)0x1FFFF720) >> 16) & 0x0000FFFF);
Temper = Refer_Temper - ((Value - Refer_Volt) * 10 + (k >> 1)) / k;
return Temper;
}
/*********************************************************************
* @fn ADC_BufferCmd
*
* @brief Enables or disables the ADCx buffer.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void ADC_BufferCmd(ADC_TypeDef *ADCx, FunctionalState NewState)
{
if(NewState != DISABLE)
{
ADCx->CTLR1 |= (1 << 26);
}
else
{
ADCx->CTLR1 &= ~(1 << 26);
}
}
/*********************************************************************
* @fn Get_CalibrationValue
*
* @brief Get ADCx Calibration Value.
*
* @param ADCx - where x can be 1 or 2 to select the ADC peripheral.
*
* @return CalibrationValue
*/
int16_t Get_CalibrationValue(ADC_TypeDef *ADCx)
{
__IO uint8_t i, j;
uint16_t buf[10];
__IO uint16_t t;
#if defined (CH32V20x_D6)
__IO uint16_t p;
#endif
for(i = 0; i < 10; i++){
ADC_ResetCalibration(ADCx);
while(ADC_GetResetCalibrationStatus(ADCx));
ADC_StartCalibration(ADCx);
while(ADC_GetCalibrationStatus(ADCx));
buf[i] = ADCx->RDATAR;
}
for(i = 0; i < 10; i++){
for(j = 0; j < 9; j++){
if(buf[j] > buf[j + 1])
{
t = buf[j];
buf[j] = buf[j + 1];
buf[j + 1] = t;
}
}
}
#if defined (CH32V20x_D8) || defined (CH32V20x_D8W)
t = 0;
for( i = 0; i < 6; i++ ) {
t += buf[i + 2];
}
t = ( t / 6 ) + ( ( t % 6 ) / 3 );
return ( int16_t )( 2048 - ( int16_t )t );
#else
t = 0;
p = 0;
/* 1024 */
for(i = 0; i < 6; i++ ){
if(buf[i+2] > 1536) break;
t += buf[i+2];
}
if(i > 0){
t = ( t / i ) + ( (( t % i )*2) / i );
}
else t = 1024;
/* 2048 */
j = 6-i;
if(j > 0){
for(; i < 6; i++ ){
p += buf[i+2];
}
p = ( p / j ) + ( (( p % j )*2) / j );
}
else p = 2048;
return ( int16_t )(((( int16_t )( 1024 - ( int16_t )t ) + ( int16_t )( 2048 - ( int16_t )p ))/2) + ((( int16_t )( 1024 - ( int16_t )t ) + ( int16_t )( 2048 - ( int16_t )p ))%2));
#endif
}
Related Packages
More from this authormohan-bee/soil-finalThis code defines a printed circuit board (PCB) featuring a sensor chip with associated decoupling capacitors, resistors, indicator LEDs with current-limiting resistors, pin headers for external connections, and a custom spear-shaped probe pad.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newShiboSoftwareDev/muse-aipi-lite-replacementA four-layer ESP32-S3 carrier board with USB‑C 5V input, AMS1117 3.3V regulation, FFC display/interface connector, status LED, reset/boot/user buttons, decoupling passives, test points, and ground/power planes.