mohan-bee/mini-mp3-player
Portable, battery-powered MP3 player hardware with USB charging, microSD storage, an MCU, VS10xx audio decoder, headphone output, status controls, and regulated power rails.
- Version
- 1.2.0
- License
- unset
- Stars
- 0
firmware/vendor/wch/Peripheral/inc/ch32v20x_gpio.h
/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v20x_gpio.h
* Author : WCH
* Version : V1.0.1
* Date : 2025/04/23
* Description : This file contains all the functions prototypes for the
* GPIO firmware library.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#ifndef __CH32V20x_GPIO_H
#define __CH32V20x_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
#include "ch32v20x.h"
/* Output Maximum frequency selection */
typedef enum
{
GPIO_Speed_10MHz = 1,
GPIO_Speed_2MHz,
GPIO_Speed_50MHz
} GPIOSpeed_TypeDef;
/* Configuration Mode enumeration */
typedef enum
{
GPIO_Mode_AIN = 0x0,
GPIO_Mode_IN_FLOATING = 0x04,
GPIO_Mode_IPD = 0x28,
GPIO_Mode_IPU = 0x48,
GPIO_Mode_Out_OD = 0x14,
GPIO_Mode_Out_PP = 0x10,
GPIO_Mode_AF_OD = 0x1C,
GPIO_Mode_AF_PP = 0x18
} GPIOMode_TypeDef;
/* GPIO Init structure definition */
typedef struct
{
uint16_t GPIO_Pin; /* Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
GPIOSpeed_TypeDef GPIO_Speed; /* Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIOSpeed_TypeDef */
GPIOMode_TypeDef GPIO_Mode; /* Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIOMode_TypeDef */
} GPIO_InitTypeDef;
/* Bit_SET and Bit_RESET enumeration */
typedef enum
{
Bit_RESET = 0,
Bit_SET
} BitAction;
/* GPIO_pins_define */
#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */
/* GPIO_Remap_define */
/* PCFR1 */
#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /* SPI1 Alternate Function mapping */
#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /* I2C1 Alternate Function mapping */
#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /* USART1 Alternate Function mapping low bit */
#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /* USART2 Alternate Function mapping */
#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /* USART3 Partial Alternate Function mapping */
#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /* USART3 Full Alternate Function mapping */
#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /* TIM1 Partial Alternate Function mapping */
#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /* TIM1 Full Alternate Function mapping */
#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /* TIM2 Partial1 Alternate Function mapping */
#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /* TIM2 Partial2 Alternate Function mapping */
#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /* TIM2 Full Alternate Function mapping */
#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /* TIM3 Partial Alternate Function mapping */
#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /* TIM3 Full Alternate Function mapping */
#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /* TIM4 Alternate Function mapping */
#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /* CAN1 Alternate Function mapping */
#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /* CAN1 Alternate Function mapping */
#define GPIO_Remap_PD0PD1 ((uint32_t)0x00008000) /* PD0 and PD1 Alternate Function mapping */
#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /* LSI connected to TIM5 Channel4 input capture for calibration */
#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /* ADC1 External Trigger Injected Conversion remapping */
#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /* ADC1 External Trigger Regular Conversion remapping */
#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /* ADC2 External Trigger Injected Conversion remapping */
#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /* ADC2 External Trigger Regular Conversion remapping */
#define GPIO_Remap_ETH ((uint32_t)0x00200020) /* Ethernet remapping (only for Connectivity line devices) */
#define GPIO_Remap_MII_RMII_SEL ((uint32_t)0x00200080) /* MII or RMII selection */
#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /* Full SWJ Disabled */
#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /* Ethernet PTP output or USB OTG SOF (Start of Frame) connected \
to TIM2 Internal Trigger 1 for calibration \
(only for Connectivity line devices) */
#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /* Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
#define GPIO_Remap_PD01 GPIO_Remap_PD0PD1
/* PCFR2 */
#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /* FSMC_NADV Alternate Function mapping */
#define GPIO_PartialRemap_USART4 ((uint32_t)0x80300001) /* USART4 Partial Alternate Function mapping */
#define GPIO_FullRemap_USART4 ((uint32_t)0x80300002) /* USART4 Full Alternate Function mapping */
#define GPIO_Remap_USART1_HighBit ((uint32_t)0x80200400) /* USART1 Alternate Function mapping high bit */
/* GPIO_Port_Sources */
#define GPIO_PortSourceGPIOA ((uint8_t)0x00)
#define GPIO_PortSourceGPIOB ((uint8_t)0x01)
#define GPIO_PortSourceGPIOC ((uint8_t)0x02)
#define GPIO_PortSourceGPIOD ((uint8_t)0x03)
/* GPIO_Pin_sources */
#define GPIO_PinSource0 ((uint8_t)0x00)
#define GPIO_PinSource1 ((uint8_t)0x01)
#define GPIO_PinSource2 ((uint8_t)0x02)
#define GPIO_PinSource3 ((uint8_t)0x03)
#define GPIO_PinSource4 ((uint8_t)0x04)
#define GPIO_PinSource5 ((uint8_t)0x05)
#define GPIO_PinSource6 ((uint8_t)0x06)
#define GPIO_PinSource7 ((uint8_t)0x07)
#define GPIO_PinSource8 ((uint8_t)0x08)
#define GPIO_PinSource9 ((uint8_t)0x09)
#define GPIO_PinSource10 ((uint8_t)0x0A)
#define GPIO_PinSource11 ((uint8_t)0x0B)
#define GPIO_PinSource12 ((uint8_t)0x0C)
#define GPIO_PinSource13 ((uint8_t)0x0D)
#define GPIO_PinSource14 ((uint8_t)0x0E)
#define GPIO_PinSource15 ((uint8_t)0x0F)
/* Ethernet_Media_Interface */
#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000)
#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001)
void GPIO_DeInit(GPIO_TypeDef *GPIOx);
void GPIO_AFIODeInit(void);
void GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_InitStruct);
void GPIO_StructInit(GPIO_InitTypeDef *GPIO_InitStruct);
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadInputData(GPIO_TypeDef *GPIOx);
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadOutputData(GPIO_TypeDef *GPIOx);
void GPIO_SetBits(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void GPIO_WriteBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
void GPIO_Write(GPIO_TypeDef *GPIOx, uint16_t PortVal);
void GPIO_PinLockConfig(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
void GPIO_EventOutputCmd(FunctionalState NewState);
void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
void GPIO_IPD_Unused(void);
#ifdef __cplusplus
}
#endif
#endif
Related Packages
More from this authormohan-bee/soil-finalThis code defines a printed circuit board (PCB) featuring a sensor chip with associated decoupling capacitors, resistors, indicator LEDs with current-limiting resistors, pin headers for external connections, and a custom spear-shaped probe pad.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newShiboSoftwareDev/muse-aipi-lite-replacementA four-layer ESP32-S3 carrier board with USB‑C 5V input, AMS1117 3.3V regulation, FFC display/interface connector, status LED, reset/boot/user buttons, decoupling passives, test points, and ground/power planes.