mohan-bee/mini-mp3-player
Portable, battery-powered MP3 player hardware with USB charging, microSD storage, an MCU, VS10xx audio decoder, headphone output, status controls, and regulated power rails.
- Version
- 1.2.0
- License
- unset
- Stars
- 0
firmware/PROVENANCE.md
# Firmware dependencies
- WCH CH32V20x SDK: https://github.com/openwch/ch32v20x/tree/baef0054588f4826548429ff4e7a9257d752ef2f — `EVT/EXAM/SRC/Peripheral`, `Core`, D6 startup, GPIO example system clock/header and linker script. The system clock selection is changed to 72 MHz HSE. Original copyright and use notices are retained. WCH restricts this software and binaries to WCH-manufactured microcontrollers; this project targets one.
- FatFs R0.16 by ChaN: https://elm-chan.org/fsw/ff/arc/ff16.zip — ff.c, ff.h, diskio.h and ffconf.h. Configuration selects read-only operation, code page 437, no LFN/exFAT, directory enumeration enabled. Original redistribution conditions and disclaimer are in ff.c/ff.h; retain them with source redistribution. The SD hardware driver in src/diskio.c is project code.
- Build tool used: xPack RISC-V GCC 15.2.0-1, Darwin arm64. Archive SHA256: `6588e8351455fad8aca37551f0e5a5543f3346bfa9a837cf03cbd3bdd4989f8f`. Download: https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/tag/v15.2.0-1 . Toolchain is not bundled.
Project firmware sources implement the board-specific driver, player state and UI. The delivered artifact inventory records checksums for the exact source and binary files used in this prototype.
Related Packages
More from this authormohan-bee/soil-finalThis code defines a printed circuit board (PCB) featuring a sensor chip with associated decoupling capacitors, resistors, indicator LEDs with current-limiting resistors, pin headers for external connections, and a custom spear-shaped probe pad.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newShiboSoftwareDev/muse-aipi-lite-replacementA four-layer ESP32-S3 carrier board with USB‑C 5V input, AMS1117 3.3V regulation, FFC display/interface connector, status LED, reset/boot/user buttons, decoupling passives, test points, and ground/power planes.