krishnax12/t113-minimal-linux

Allwinner T113-S3 dual-Cortex-A7 SoC with integrated 128MB DDR3, multi-rail decoupling, 24MHz and 32.768kHz oscillators, filtering, and exposed test points.

Version
0.1.1
License
unset
Stars
0

routing/gerber-check.json

{
  "passed": true,
  "checks": [
    {
      "id": "F_Cu.gbr_nonempty",
      "passed": true
    },
    {
      "id": "In1_Cu.gbr_nonempty",
      "passed": true
    },
    {
      "id": "In2_Cu.gbr_nonempty",
      "passed": true
    },
    {
      "id": "B_Cu.gbr_nonempty",
      "passed": true
    },
    {
      "id": "Edge_Cuts.gbr_nonempty",
      "passed": true
    },
    {
      "id": "plated_drill_geometry",
      "passed": true,
      "missingAreaMm2": 0.0,
      "extraAreaMm2": 0.0
    },
    {
      "id": "nonplated_drill_geometry",
      "passed": true,
      "missingAreaMm2": 0.0,
      "extraAreaMm2": 0.0
    }
  ],
  "parsedGerberObjects": {
    "F_Cu.gbr": 1430,
    "F_SilkScreen.gbr": 8454,
    "F_Mask.gbr": 388,
    "F_Paste.gbr": 366,
    "B_Cu.gbr": 554,
    "B_SilkScreen.gbr": 1781,
    "B_Mask.gbr": 64,
    "B_Paste.gbr": 42,
    "Edge_Cuts.gbr": 196,
    "In1_Cu.gbr": 559,
    "In2_Cu.gbr": 577,
    "F_Fab.gbr": 163
  },
  "parserDiagnostics": [
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:692 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:694 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:696 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:698 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:700 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:702 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:704 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "F_Paste.gbr",
      "message": "<unknown>:706 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:173 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:175 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:177 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:179 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:181 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:183 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:185 \"LR270\": Unknown statement found: \"LR270\", ignoring."
    },
    {
      "file": "B_Paste.gbr",
      "message": "<unknown>:187 \"LR0\": Unknown statement found: \"LR0\", ignoring."
    },
    {
      "file": "drill-L1-L4.drl",
      "message": "<unknown>:18 \"G90\": G90 header statement found after end of header"
    },
    {
      "file": "drill_npth.drl",
      "message": "<unknown>:16 \"G90\": G90 header statement found after end of header"
    }
  ],
  "archiveSha256": "33356664a0e71e050bc6fa5784a69081ce83a1e575f45c6ce435b593ef54ee54",
  "scope": "Gerbonara 1.6.3 syntax parsing, four copper layers, and full plated/nonplated drill geometry with 0.0002 mm coordinate tolerance. Gerbonara does not interpret the Gerber LR aperture-rotation commands in paste layers; their diagnostics are retained. This is not a fabrication or impedance certification."
}