hrithik18k/metal-touch-panel
A PCB autorouting wrapper that corrects footprint-trace obstacle dimensions, solves routes with a preloaded trace-graph solver, and reports completed traces or routing errors.
- Version
- 1.0.0
- License
- unset
- Stars
- 0
BOM.csv
Reference,Quantity,Part or value,Package,Layer,Assembly notes
U1,1,LDC1614RGHR,WQFN-16 4x4 EP2.6,bottom,TI; JLCPCB C968448; verify stencil paste windowing
C1 C2 C3 C4,4,1nF 1% C0G NP0 >=25V,0603,bottom,Resonant capacitors; tune only after measuring coil and target
C5,1,100nF X7R >=10V,0603,bottom,Local supply decoupling
C6,1,1uF X7R >=10V,0603,bottom,Supply bulk decoupling
R1 R2,2,4.7kohm 1% >=0.1W,0603,bottom,I2C pullups
J1,1,1x5 male header 2.54mm,THT,bottom,Host 3V3 GND SDA SCL INTB
L1 L2 L3 L4,0,Printed 12-turn coils estimated 3uH,PCB copper,top,DO NOT PLACE purchased inductors
Related Packages
More from this authorhrithik18k/air-mouseA hardware component library defining footprints and 3D models for an ESP32 module, motion sensors, battery chargers, voltage regulator, connectors, switches, and status LED.
Similar package0hmX/mt41k512m8da-107-it-p-fanoutThis code defines the physical footprint, routing, and layout configuration for a DDR3 memory module using surface-mount pads, vias, and copper traces on a printed circuit board (PCB).
Discover something newtscircuit/standard-jst-programmer26 × 42 mm USB-C RP2040 programmer with JST and TC2030 IDC SWD, NRST, selectable sensed 5 V / 3.3 V power, RGB status, and importable JST SH/Tag-Connect targets. Top-side assembly.