gokul/usb3-sd-hub
Engineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
- Version
- 0.1.5
- License
- MIT
- Stars
- 0
Files in (root)/verification
- issues
- accepted-phase-routes.json
- check-partial-routes.ts
- engineering-bom.csv
- gerber-inspection.json
- gerber-preview.png
- NOT-FOR-FABRICATION-partial-gerbers.zip
- pair-geometry-check.json
- pair-measurements.ts
- partial-routing-build.log
- partial-routing-pcb.png
- partial-routing-pcb.svg
- partial-routing.circuit.json
- partial-routing.glb
- POWER-DECISION.md
- publication.json
- rebuild-partial-review.tsx
- schematic-sheet-1.png
- schematic-sheet-1.svg
- schematic-sheet-2.png
- schematic-sheet-2.svg
- schematic-sheet-3.png
- schematic-sheet-3.svg
- stencil-check.json
- typecheck.log
- UNVERIFIED-pick-and-place.csv
- validation-summary.json
- VERIFICATION.md
Related Packages
More from this authorgokul/musegrowUSB‑C powered ESP32‑C3 controller board with regulated 3.3 V supply, USB ESD protection, buttons/status LEDs, ambient-light I²C sensing, and a 555-driven capacitive soil-moisture electrode.
Similar packagepixalynx/usb3-hub-10gA USB 3.2 Gen 2 six-port hub board with USB-C PD power input, regulated 5 V/3.3 V/1.15 V rails, one upstream and four protected downstream USB-A/USB-C ports, SuperSpeed muxes, ESD protection, and controlled port power.
Discover something newolivergrabinski/tscircuit-weatherA 60×44 mm ESP32-S3 Wi‑Fi/BLE weather-station PCB with USB‑C power, 3.3 V regulation and ESD protection, temperature/humidity and UV/light sensors, status LEDs, buttons, Qwiic I²C expansion, debug GPIO header, and a printable enclosure.