astra/pd-power-supply
USB-PD Power Supply with RP2040 controller
- Version
- 1.1.6
- License
- unset
- Stars
- 0
build.log
> @tsci/astra.pd-power-supply@1.1.6 prebuild
> node scripts/patch-copper-geometry.cjs
> @tsci/astra.pd-power-supply@1.1.6 build
> tsci build --site
Building 2 file(s)...
Building board.circuit.tsx...
Generating circuit JSON...
Each child in a list should have a unique "key" prop.
Check the render method of `board`. It was passed a child from PowerSupplyBoard. See https://react.dev/link/warning-keys for more information.
Circuit JSON written to dist/board/circuit.json
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "R" prefix is being used with a <chip />, try using it with a <resistor />
The "R" prefix is being used with a <chip />, try using it with a <resistor />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
<trace#887(from:.U_MCU > .XIN to:.Y1 > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#888(from:.Y1 > .pin1 to:.C_X1 > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#889(from:.Y1 > .pin3 to:.C_X2 > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#890(from:.Y1 > .pin3 to:.R_XTAL > .pin2) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#891(from:.U_MCU > .XOUT to:.R_XTAL > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
Port SBU2 on J_PWR is missing a trace
Port SBU1 on J_PWR is missing a trace
Port SBU2 on J_DATA is missing a trace
Port SBU1 on J_DATA is missing a trace
TP_PD_RAW has no courtyard
TP_LOAD_IN has no courtyard
TP_LOAD_OUT has no courtyard
TP_LOAD_IN_FANOUT has no courtyard
TP_LOAD_OUT_FANOUT has no courtyard
All pins on TP_PD_RAW are underspecified (no pinAttributes set)
All pins on TP_LOAD_IN are underspecified (no pinAttributes set)
All pins on TP_LOAD_OUT are underspecified (no pinAttributes set)
All pins on TP_LOAD_IN_FANOUT are underspecified (no pinAttributes set)
All pins on TP_LOAD_OUT_FANOUT are underspecified (no pinAttributes set)
All pins on RV_COARSE are underspecified (no pinAttributes set)
All pins on RV_FINE are underspecified (no pinAttributes set)
All pins on J_LEVER are underspecified (no pinAttributes set)
All pins on J_I2C are underspecified (no pinAttributes set)
U_PD has no pin with requires_power=true
U_MCU has no pin with requires_power=true
RV_COARSE has no pin with requires_power=true
RV_FINE has no pin with requires_power=true
J_LEVER has no pin with requires_power=true
U_SENSE has no pin with requires_power=true
J_I2C has no pin with requires_power=true
U_LOAD has no pin with requires_power=true
RV_COARSE has no pin with requires_ground=true
RV_FINE has no pin with requires_ground=true
J_LEVER has no pin with requires_ground=true
J_I2C has no pin with requires_ground=true
<capacitor#686(.B1>.C_IO6) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<resistor#892(.B1>.R_XTAL) /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<capacitor#746(.B1>.C_VREGI) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
<capacitor#674(.B1>.C_IO5) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#638(.B1>.C_IO2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#905(.B1>.C_X1) /> footprint "0402" does not match supplier footprint jlcpcb:C107005 (copper IoU 0.7249).
<capacitor#917(.B1>.C_X2) /> footprint "0402" does not match supplier footprint jlcpcb:C107005 (copper IoU 0.7249).
<capacitor#626(.B1>.C_IO1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#722(.B1>.C_DV1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#698(.B1>.C_UV) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#662(.B1>.C_IO4) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#734(.B1>.C_DV2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#650(.B1>.C_IO3) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#758(.B1>.C_VREGO) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
<capacitor#710(.B1>.C_AV) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
Building index.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/index/circuit.json
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "TP" prefix is being used with a <chip />, try using it with a <testpoint />
The "R" prefix is being used with a <chip />, try using it with a <resistor />
The "R" prefix is being used with a <chip />, try using it with a <resistor />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
<trace#3821(from:.U_MCU > .XIN to:.Y1 > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#3822(from:.Y1 > .pin1 to:.C_X1 > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#3823(from:.Y1 > .pin3 to:.C_X2 > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#3824(from:.Y1 > .pin3 to:.R_XTAL > .pin2) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#3825(from:.U_MCU > .XOUT to:.R_XTAL > .pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
Port SBU2 on J_PWR is missing a trace
Port SBU1 on J_PWR is missing a trace
Port SBU2 on J_DATA is missing a trace
Port SBU1 on J_DATA is missing a trace
TP_PD_RAW has no courtyard
TP_LOAD_IN has no courtyard
TP_LOAD_OUT has no courtyard
TP_LOAD_IN_FANOUT has no courtyard
TP_LOAD_OUT_FANOUT has no courtyard
All pins on TP_PD_RAW are underspecified (no pinAttributes set)
All pins on TP_LOAD_IN are underspecified (no pinAttributes set)
All pins on TP_LOAD_OUT are underspecified (no pinAttributes set)
All pins on TP_LOAD_IN_FANOUT are underspecified (no pinAttributes set)
All pins on TP_LOAD_OUT_FANOUT are underspecified (no pinAttributes set)
All pins on RV_COARSE are underspecified (no pinAttributes set)
All pins on RV_FINE are underspecified (no pinAttributes set)
All pins on J_LEVER are underspecified (no pinAttributes set)
All pins on J_I2C are underspecified (no pinAttributes set)
U_PD has no pin with requires_power=true
U_MCU has no pin with requires_power=true
RV_COARSE has no pin with requires_power=true
RV_FINE has no pin with requires_power=true
J_LEVER has no pin with requires_power=true
U_SENSE has no pin with requires_power=true
J_I2C has no pin with requires_power=true
U_LOAD has no pin with requires_power=true
RV_COARSE has no pin with requires_ground=true
RV_FINE has no pin with requires_ground=true
J_LEVER has no pin with requires_ground=true
J_I2C has no pin with requires_ground=true
Failed to fetch supplier footprint for <resistor#3943(.B1>.R_BLEED) /> (jlcpcb:C17902): Failed to search for the component (HTTP 429)
<capacitor#3851(.B1>.C_X2) /> footprint "0402" does not match supplier footprint jlcpcb:C107005 (copper IoU 0.7249).
<resistor#3826(.B1>.R_XTAL) /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<capacitor#3839(.B1>.C_X1) /> footprint "0402" does not match supplier footprint jlcpcb:C107005 (copper IoU 0.7249).
<capacitor#3644(.B1>.C_AV) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3572(.B1>.C_IO2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3632(.B1>.C_UV) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3608(.B1>.C_IO5) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3656(.B1>.C_DV1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3620(.B1>.C_IO6) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3668(.B1>.C_DV2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3560(.B1>.C_IO1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3596(.B1>.C_IO4) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3692(.B1>.C_VREGO) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
<capacitor#3584(.B1>.C_IO3) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#3680(.B1>.C_VREGI) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
Generating 3D preview images for all site builds...
Build complete
Circuits 2 passed
Options site
Output dist
✓ Done
Build exiting with code 0: build finished successfully
Related Packages
More from this authorastra/nema17-stepper-motor-controller-spring-clamp-rp2040A 4-layer RP2040 controller board that negotiates USB‑C PD motor power and drives a NEMA17 stepper via a DRV8825, with current sensing, thermal shutdown, RGB status LED, buzzer alarm, optional AS5600 encoder, protection/filtering, and test points.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newhrithik18k/air-mouseA hardware component library defining footprints and 3D models for an ESP32 module, motion sensors, battery chargers, voltage regulator, connectors, switches, and status LED.