abse/smartwatch-flex-top-only
Three-panel flex smartwatch with two parallel R3.9 bends, all components flat-top, low-profile JST connector harnesses, split heartbeat optical windows and screw-retained PCB mounting. Modeled 39 × 50.5 × 14.5mm prototype; 100% routing, zero native DRC and shorts. Hardware qualification pending.
- Version
- 0.2.20
- License
- unset
- Stars
- 0
Files in (root)/mechanical
- site-previews
- assembly-display.glb
- battery-envelope.ts
- battery-harness.glb
- battery-harness.ts
- battery-ntc-harness.glb
- battery-ntc-harness.ts
- bezel-bondline.glb
- bezel-bondline.ts
- button-actuator.glb
- button-actuator.stl
- button-actuator.ts
- case-bezel.glb
- case-bezel.stl
- case-bezel.ts
- case-body.glb
- case-body.stl
- case-body.ts
- coil-ntc-harness.glb
- coil-ntc-harness.ts
- coilcraft-0402dc-envelope.ts
- display.ts
- ferrite-envelope.ts
- fh35c-connector.ts
- haptic-harness.glb
- haptic-harness.ts
- harness-manifest.json
- heartbeat-sensor.ts
- jst-ach-header.ts
- led-window.stl
- m1-6x6-iso7046.glb
- m1-6x6-iso7046.ts
- mlcc0402-conservative.ts
- mlcc0603-conservative.ts
- mlcc0805-conservative.ts
- motor-factory-leads.glb
- motor-factory-leads.ts
- motor-inline-connector.glb
- motor-inline-connector.ts
- motor-support-shim.glb
- motor-support-shim.ts
- mount-fit-case-post.stl
- mount-fit-cradle-corner.stl
- mount-fit-retainer.stl
- mount-hardware.json
- optical-enclosure.glb
- optical-light-seal.glb
- optical-light-seal.ts
- optical-windows.glb
- optical-windows.ts
- original-display.glb
- original-enclosure.glb
- pcb-cradle.glb
- pcb-cradle.ts
- pcb-mount-screws.glb
- pcb-mounting-cradle.stl
- pcb-retainers.glb
- pcb-supports.glb
- photodiode-window.stl
- power-inductor-envelope.ts
- reference-battery-thermistor.glb
- reference-coil-thermistor.glb
- relocated-motor.glb
- relocated-motor.ts
- res0201-conservative.ts
- retainer-front-left.stl
- retainer-front-left.ts
- retainer-front-right.stl
- retainer-front-right.ts
- revised-enclosure.glb
- sot23-5-envelope.ts
- temperature-probes.glb
- temperature-probes.ts
- upright-pcb.glb.gz
Related Packages
More from this authorabse/boostxl-uln2003This code defines a React component that models a through-hole or surface-mount LED with specified pin labels, footprint, silkscreen, and 3D CAD model for PCB layout.
Discover something newastra/iphone-encoder-counterA CR2450-powered MSP430 FRAM counter combines an always-on dual-channel TMR rotation sensor, pushbutton input, and ST25DV NFC tag with an integrated tuned printed antenna and I²C/GPIO interface.