abse/gameboy-advance
Validates and exports a four-layer Game Boy–style PCB assembly with RP2350 MCU, 32MB flash, USB-C, LCD and speaker connectors, battery buck-boost power, buttons, and verified routing, connectivity, clearances, CAD models, and physical DRC.
- Version
- 0.0.39
- License
- unset
- Stars
- 0
Files in (root)/checks
- datasheets
- accepted-baseline.json
- assembly-mark-locations.json
- build-validated.ts
- button-contact-audit.json
- button-contacts.ts
- button-positions.json
- changed-component-enclosure-review.json
- control-model-alignment.ts
- controls-probe.ts
- current-stock-review.json
- edge-outline.json
- electrical-prototype.ts
- geometry.ts
- inherited-validation-reference.json
- manual-preflight.ts
- manual-routing-smoke.tsx
- model-contact-projection-audit.json
- netvia-label-smoke.ts
- netvia-smoke.ts
- pcb-cutout-clearance.ts
- pcbvia-smoke.ts
- physical-connectivity-regression.ts
- physical-connectivity.ts
- pre-flash.circuit.json
- preflight-check.ts
- probe-edge.ts
- render-placement-preview.ts
- render-usb-reference.ts
- reviewed-length-limits.json
- route-transition-check.ts
- run-validated.ts
- schematic-validation.ts
- seed-check.ts
- speaker-connector-validation.ts
- temporary-ground-length-workaround.json
- trace-length-review.md
- usb-cad-validation.ts
- usb-differential-routing.ts
- usb-model-smoke.ts
- usb-netlist-validation.ts
Related Packages
More from this authorabse/isv57t090-motion-controllerA 36 V-powered RP2040 motion-controller PCB that regulates 5 V, drives isolated STEP/DIR servo inputs, monitors alarms, temperature, limits and E-stop signals, and provides protected safety/field connectors.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newShiboSoftwareDev/nema8-20mm-usbc-pd-controllerA 20×20 mm four-layer USB‑C PD stepper motor controller PCB using a CH32X035 MCU, TMC2209 driver, protected power inputs, USB data/boot interface, 3.3 V regulation, ESD/TVS protection, current-sense circuitry, and NEMA‑8 motor outputs.