abse/dual-usb-peltier-assembly

firmware/include/general_pd_rp2040.h

#ifndef GENERAL_PD_RP2040_H
#define GENERAL_PD_RP2040_H
// Custom RP2040 board, 12 MHz crystal and Winbond W25Q128JVSIQ (16 MiB).
pico_board_cmake_set(PICO_PLATFORM, rp2040)
pico_board_cmake_set_default(PICO_FLASH_SIZE_BYTES, (16 * 1024 * 1024))
#define PICO_FLASH_SIZE_BYTES (16 * 1024 * 1024)
#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
#define PICO_FLASH_SPI_CLKDIV 4
#define PICO_XOSC_HZ 12000000
#define PD_I2C_SDA_PIN 0
#define PD_I2C_SCL_PIN 1
#define PD_PERMISSION_PIN 2
#define PD_DRIVER_FAULT_PIN 3
#define PD_PD_FAULT_PIN 4
#define PD_RUN_LED_PIN 6
#define PD_FAULT_LED_PIN 7
#define PD_HOT_SENSOR_PIN 8
#define PD_COLD_SENSOR_PIN 9
#define PD_CURRENT_ADC_PIN 26
#define PD_VOLTAGE_ADC_PIN 27
#define PD_INPUT_ADC_PIN 28
#define PD_PROGRAM_ADC_PIN 29
#define PD_ADC_REFERENCE_MV 3300u
#define PD_USB_ATTACH_MV 4200u
#define PD_USB_DETACH_MV 3800u
#endif