abse/boostxl-bassensors

This code defines React components for various electronic hardware components such as LEDs and sensors, specifying their 3D models, footprints with SMT pads, silkscreen outlines, and pin labels for PCB integration.

Version
1.0.3
License
unset
Stars
0

README.md

# BOOSTXL-BASSENSORS

tscircuit reconstruction of TI's BOOSTXL-BASSENSORS Building Automation Sensors BoosterPack.

## Design status

- Electrical schematic matches the circuit and values in TI user guide SLAU762B, Figure 5-1.
- All ICs, MOSFETs, LEDs, and connectors are local JLCPCB imports with explicit LCSC part numbers.
- Resistors and capacitors use native tscircuit elements with explicit manufacturer and LCSC part numbers.
- The board uses 0.3 mm minimum via holes and 0.45 mm minimum via pads.
- Build, TypeScript, release-audit, and Gerber short checks pass.
- Released for a **small first-article prototype order only**. Final production mechanical sign-off is pending comparison with TI design archive SLAC777. The TI download currently requires a myTI login; the six breakaway slots and exact fabrication outline remain provisional until that archive is retrieved.

See `docs/order-readiness.md` for the mandatory 1:1 breakaway and first-article bench checks before any quantity order.

## Commands

```sh
bun install
bun run verify
bun run snapshot:update
```

## Primary references

- TI product page: <https://www.ti.com/tool/BOOSTXL-BASSENSORS>
- TI user guide SLAU762B: `reference/ti/BOOSTXL-BASSENSORS-user-guide-SLAU762B.pdf`
- TI design archive SLAC777: <https://www.ti.com/lit/zip/SLAC777>