Devesh36/usb-c-phone-stand-light
A 3D-printed tilted phone stand integrating USB‑C PD power, a Qi wireless charging coil with magnetic alignment ring, indicator LEDs/light pipes, control and protection PCBs, wiring, fasteners, and rubber feet.
- Version
- 0.0.6
- License
- unset
- Stars
- 0
imports/README.md
The C540985 (HL-C3535F3V3EA-ZW) and C540986 (HL-C3535F4IR3EA-ZW) footprints and models were imported from the JLCEDA / EasyEDA Official Library. Their original pad geometry and <silkscreenrect> outlines are retained. C540985 pin aliases are corrected to match its + polarity mark (pad 1 anode, pad 2 cathode). Both components are placed at 45 degrees on the separate emitter PCB.
Related Packages
More from this authorDevesh36/red-accent-light-led-rotation-reproA 12V PCB red accent light using an LM317 constant-current driver to power two series high-power LEDs at 0° and 45°, with Schottky reverse-polarity protection, filtering capacitors, thermal vias/planes, and test points.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newmuse/book-reading-clip-lampA Wi‑Fi/USB‑C ESP32‑S3 reading lamp with OV5640 camera, microphone, speaker amplifier, rechargeable Li‑Po power management, six-LED boost light, USB protection/charging detection, and a clip/gooseneck enclosure with external FlexPIFA antenna.