AnasSarkiz/magnetic-shutter-remote-r8

A USB‑C rechargeable battery-powered ESP32‑C3 wireless controller with Li‑ion charging, protected 3.3‑V buck‑boost regulation, thermal/safety monitoring, status LEDs, buttons, programming UART, crystal clock, and 2.4‑GHz antenna matching network.

Version
0.4.0-prototype
License
unset
Stars
0

imports/TPS63031DSKR/TPS63031DSKR.tsx

import objPath from "./TPS63031DSKR.obj"
import stepPath from "./TPS63031DSKR.step"
import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["VOUT"],
  pin2: ["L2"],
  pin3: ["PGND"],
  pin4: ["L1"],
  pin5: ["VIN"],
  pin6: ["EN"],
  pin7: ["PS","SYNC"],
  pin8: ["VINA"],
  pin9: ["GND"],
  pin10: ["FB"],
  pin11: ["EP"]
} as const

const pinAttributes = {
  pin3: {requiresGround: true},
  pin5: {requiresPower: true},
  pin9: {requiresGround: true}
} as const

export const TPS63031DSKR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C15516"
  ]
}}
      manufacturerPartNumber="TPS63031DSKR"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-1.157478mm" pcbY="0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin2"]} pcbX="-1.157478mm" pcbY="0.499872mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin3"]} pcbX="-1.157478mm" pcbY="0mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin4"]} pcbX="-1.157478mm" pcbY="-0.500126mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin5"]} pcbX="-1.157478mm" pcbY="-0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin10"]} pcbX="1.157478mm" pcbY="0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin9"]} pcbX="1.157478mm" pcbY="0.499872mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin8"]} pcbX="1.157478mm" pcbY="0mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin7"]} pcbX="1.157478mm" pcbY="-0.500126mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin6"]} pcbX="1.157478mm" pcbY="-0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<smtpad portHints={["pin11"]} pcbX="0mm" pcbY="0mm" width="1.1999976mm" height="1.999996mm" shape="rect" solderPasteMargin="0mm" solderMaskMargin="0.0508mm" />
<silkscreenpath route={[{"x":-1.326210200000105,"y":1.326210200000105},{"x":1.3262101999999913,"y":1.326210200000105}]} />
<silkscreenpath route={[{"x":1.3262101999999913,"y":-1.326210200000105},{"x":-1.326210200000105,"y":-1.326210200000105}]} />
<silkscreencircle pcbX="-1.789938mm" pcbY="0.999998mm" radius="0.100076mm" />
<silkscreentext text="{NAME}" pcbX="-0.1905mm" pcbY="2.3208mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.7399767000000566,"y":1.4999848000001066},{"x":1.7399766999999429,"y":1.4999848000001066},{"x":1.7399766999999429,"y":-1.5000102000000197},{"x":-1.7399767000000566,"y":-1.5000102000000197},{"x":-1.7399767000000566,"y":1.4999848000001066}]} />
      </footprint>}
      cadModel={{
        objUrl: objPath,
        stepUrl: stepPath,
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0.000012699999842880061, z: 0 },
      }}
      {...props}
    />
  )
}