tscircuit/standard-jst-programmer

26 × 42 mm USB-C RP2040 programmer with JST and TC2030 IDC SWD, NRST, selectable sensed 5 V / 3.3 V power, RGB status, and importable JST SH/Tag-Connect targets. Top-side assembly.

Version
0.8.0
License
unset
Stars
0

circuits/side.circuit.tsx

PCBPCB preview for circuits/side.circuit.tsx
SchematicSchematic preview for circuits/side.circuit.tsx
import { StandardTagConnectSwd } from "../tag-connect";
import type { BoardProps } from "@tscircuit/props";
import {
  StandardJstUartSide,
  StandardJstSwdSide,
  StandardJstPowerSide,
  StandardJstSwdResetSide,
} from "../connectors";
export default (props: BoardProps = {}) => (
  <board {...props} width={20} height={48}>
    <schematicsheet name="side-connectors" displayName="Side target connector footprints">
      <schematicsection name="side-swd" displayName="3-pin SWD" sectionTitleFontSize={0.35} />
      <schematicsection name="side-power" displayName="2-pin power" sectionTitleFontSize={0.35} />
      <schematicsection name="side-reset" displayName="5-pin SWD with NRST" sectionTitleFontSize={0.35} />
      <schematicsection name="side-uart" displayName="3-pin UART (target)" sectionTitleFontSize={0.35} />
      <schematicsection name="side-tag" displayName="Tag-Connect target pads" sectionTitleFontSize={0.35} />
    </schematicsheet>
    <StandardJstSwdSide
      name="J1" schX={-7} schY={3} schSheetName="side-connectors" schSectionName="side-swd"
      pcbX={-4.5}
      pcbY={9.0}
      pcbStyle={{ silkscreenTextVisibility: "hidden" }}
    />
    <StandardJstPowerSide
      name="J2" schX={7} schY={3} schSheetName="side-connectors" schSectionName="side-power"
      pcbX={4.5}
      pcbY={9.0}
      pcbStyle={{ silkscreenTextVisibility: "hidden" }}
    />
    <silkscreentext text="SWD" pcbX={-4.5} pcbY={14.7} fontSize={0.8} />
    <silkscreentext
      text="1:CLK 2:GND 3:DIO"
      pcbX={-4.5}
      pcbY={13.5}
      fontSize={0.55}
    />
    <silkscreentext text="POWER" pcbX={4.5} pcbY={14.7} fontSize={0.8} />
    <silkscreentext
      text="1:VOUT 2:GND"
      pcbX={4.5}
      pcbY={13.5}
      fontSize={0.55}
    />
    <StandardJstSwdResetSide
      name="J3" schX={-7} schY={-3} schSheetName="side-connectors" schSectionName="side-reset"
      pcbX={0}
      pcbY={-1.0}
      pcbStyle={{ silkscreenTextVisibility: "hidden" }}
    />
    <silkscreentext text="SWD+NRST" pcbX={0} pcbY={3.8} fontSize={0.8} />
    <silkscreentext
      text="1:VOUT 2:DIO 3:GND 4:CLK 5:NRST"
      pcbX={0}
      pcbY={2.5}
      fontSize={0.65}
    />
    <StandardJstUartSide name="J5" pcbX={0} pcbY={-10}
      schX={-7} schY={-8} schSheetName="side-connectors" schSectionName="side-uart" />
    <silkscreentext text="UART" pcbX={4.5} pcbY={-10} fontSize={0.7} />
    <StandardTagConnectSwd name="J4" schX={7} schY={-3} schSheetName="side-connectors" schSectionName="side-tag" pcbX={0} pcbY={-18.5} />
  </board>
);