tscircuit/boosters
This code defines PCB schematics, footprints, and 3D CAD models for various integrated circuits, connectors, sensors, and electronic components used in TI booster packs and modules.
- Version
- 0.1.19
- License
- unset
- Stars
- 0
boostxl-uln2003/index.circuit.tsx
PCB
Schematic
import { A_19_21_GHC_YR1S2_4T } from "./imports/A_19_21_GHC_YR1S2_4T"
import { A_2_54_1_10P_ } from "./imports/A_2_54_1_10P_"
import { A_2_54_1_6P_ } from "./imports/A_2_54_1_6P_"
import { CSD17571Q2 } from "./imports/CSD17571Q2"
import { HX_PH254_01_02_Z_L11_5_male_header_connector } from "./imports/HX_PH254_01_02_Z_L11_5_male_header_connector"
import { KH_SK22D07_G5 } from "./imports/KH_SK22D07_G5"
import { MMSZ5242B } from "./imports/MMSZ5242B"
import { MTP125_1105S1 } from "./imports/MTP125_1105S1"
import { SN74HC595DR } from "./imports/SN74HC595DR"
import { SS24FL } from "./imports/SS24FL"
import { SSQ_110_03_T_D } from "./imports/SSQ_110_03_T_D"
import { ULN2003ADR } from "./imports/ULN2003ADR"
import { ULN2803ADWR } from "./imports/ULN2803ADWR"
const INTERFACE_SHEET = "LaunchPad Interface and Mode Selection"
const CONTROL_SHEET = "Serial and Parallel Control"
const DRIVER_SHEET = "ULN2003 Motor Driver and Outputs"
const POWER_SHEET = "Motor Supply and Protection"
const N = {
V3V3: "net.V3V3",
V5: "net.V5",
VIN: "net.VIN",
VCC: "net.VCC",
DGND: "net.DGND",
AGND: "net.AGND",
COM: "net.COM",
GP2: "net.GP2",
GP6: "net.GP6",
GP8: "net.GP8",
GP9: "net.GP9",
GP10: "net.GP10",
GP11: "net.GP11",
GP12: "net.GP12",
GP13: "net.GP13",
SER: "net.SER",
RCLK: "net.RCLK",
SRCLK: "net.SRCLK",
OE: "net.OE",
IN1: "net.IN1",
IN2: "net.IN2",
IN3: "net.IN3",
IN4: "net.IN4",
IN5: "net.IN5",
IN6: "net.IN6",
IN7: "net.IN7",
IN8: "net.IN8",
M1_CH1: "net.M1_CH1",
M1_CH2: "net.M1_CH2",
M1_CH3: "net.M1_CH3",
M1_CH4: "net.M1_CH4",
M2_CH5: "net.M2_CH5",
M2_CH6: "net.M2_CH6",
M2_CH7: "net.M2_CH7",
M2_CH8: "net.M2_CH8",
LED1_R: "net.LED1_R",
LED2_R: "net.LED2_R",
LED3_R: "net.LED3_R",
LED4_R: "net.LED4_R",
LED_RETURN: "net.LED_RETURN",
} as const
export default function Circuit() {
return (
<board
name="BOOSTXL_ULN2003"
width="56mm"
height="60mm"
layers={4}
solderMaskColor="red"
silkscreenColor="white"
defaultTraceWidth="0.35mm"
minViaHoleDiameter="0.3mm"
minViaPadDiameter="0.45mm"
autorouter={{ preset: "auto_local", local: true, traceClearance: "0.25mm" }}
autorouterEffortLevel="5x"
>
<schematicsheet name={INTERFACE_SHEET} displayName={INTERFACE_SHEET} sheetIndex={1} />
<schematicsheet name={CONTROL_SHEET} displayName={CONTROL_SHEET} sheetIndex={2} />
<schematicsheet name={DRIVER_SHEET} displayName={DRIVER_SHEET} sheetIndex={3} />
<schematicsheet name={POWER_SHEET} displayName={POWER_SHEET} sheetIndex={4} />
<silkscreentext text="BOOSTXL-ULN2003" pcbX={0} pcbY={-27.5} fontSize="1.4mm" anchorAlignment="center" />
<silkscreentext text="DUAL STEPPER MOTOR DRIVER" pcbX={0} pcbY={-25.4} fontSize="0.8mm" anchorAlignment="center" />
<silkscreentext text="MOTOR 1" pcbX={-11} pcbY={27.3} fontSize="1mm" anchorAlignment="center" />
<silkscreentext text="MOTOR 2" pcbX={11} pcbY={27.3} fontSize="1mm" anchorAlignment="center" />
<silkscreentext text="3-PIN" pcbX={7.5} pcbY={-20.5} fontSize="0.8mm" anchorAlignment="center" />
<silkscreentext text="8-PIN" pcbX={-7.5} pcbY={-20.5} fontSize="0.8mm" anchorAlignment="center" />
<group name="LAUNCHPAD_LEFT_INTERFACE" schSheetName={INTERFACE_SHEET} schX={-10.5} schY={0} pcbX={0} pcbY={0} schMaxTraceDistance="0mm" schTraceAutoLabelEnabled>
<schematicsection name="LEFT_LAUNCHPAD_HEADERS" displayName="Left LaunchPad and Optional Development Headers" />
<SSQ_110_03_T_D
name="J1J3"
displayName="J1/J3"
schX={0}
schY={0}
schWidth="6mm"
schHeight="8.2mm"
schPinArrangement={{
leftSide: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19],
rightSide: [2, 4, 6, 8, 10, 12, 14, 16, 18, 20],
}}
pcbX={-24}
pcbY={-8}
pcbRotation={90}
layer="bottom"
connections={{ pin1: N.V3V3, pin2: N.V5, pin3: N.GP2, pin4: N.DGND, pin11: N.GP6, pin13: N.GP8, pin15: N.GP9, pin19: N.GP10 }}
noConnect={["pin5", "pin6", "pin7", "pin8", "pin9", "pin10", "pin12", "pin14", "pin16", "pin17", "pin18", "pin20"]}
/>
</group>
<group name="LEFT_OPTIONAL_HEADERS" schSheetName={INTERFACE_SHEET} schX={-10.5} schY={-6.6} pcbX={0} pcbY={0} schMaxTraceDistance="0mm" schTraceAutoLabelEnabled>
<schematicsection name="LEFT_DEVELOPMENT_HEADERS" displayName="Optional Left Development Headers (DNP)" />
<A_2_54_1_10P_
name="J5"
displayName="J5 DNP"
doNotPlace
schX={-2.1}
schY={0}
schWidth="3.5mm"
schHeight="3.1mm"
pcbX={-26.5}
pcbY={13}
pcbRotation={90}
footprint={<footprint />}
connections={{ pin6: N.DGND, pin9: N.GP2 }}
noConnect={["pin1", "pin2", "pin3", "pin4", "pin5", "pin7", "pin8", "pin10"]}
/>
<pinheader
name="J0"
displayName="J0 DNP"
doNotPlace
pinCount={8}
gender="unpopulated"
manufacturerPartNumber="DNP-1X8-2.54MM"
supplierPartNumbers={{ jlcpcb: ["C57369"] }}
schX={2.1}
schY={0}
schWidth="3.5mm"
schHeight="3.1mm"
pcbX={-20.5}
pcbY={-8}
pcbRotation={90}
footprint={<footprint />}
connections={{ pin1: N.GP6, pin3: N.GP8, pin5: N.GP9, pin8: N.GP10 }}
/>
</group>
<group name="LAUNCHPAD_RIGHT_INTERFACE" schSheetName={INTERFACE_SHEET} schX={10.5} schY={0} pcbX={0} pcbY={0} schMaxTraceDistance="0mm" schTraceAutoLabelEnabled>
<schematicsection name="RIGHT_LAUNCHPAD_HEADERS" displayName="Right LaunchPad and Optional Development Header" />
<SSQ_110_03_T_D
name="J2J4"
displayName="J2/J4"
schX={0}
schY={0}
schWidth="6mm"
schHeight="8.2mm"
schPinArrangement={{
leftSide: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19],
rightSide: [2, 4, 6, 8, 10, 12, 14, 16, 18, 20],
}}
pcbX={24}
pcbY={-8}
pcbRotation={90}
layer="bottom"
connections={{ pin1: N.DGND, pin13: N.GP13, pin15: N.GP12, pin17: N.GP11 }}
noConnect={["pin2", "pin3", "pin4", "pin5", "pin6", "pin7", "pin8", "pin9", "pin10", "pin11", "pin12", "pin14", "pin16", "pin18", "pin19", "pin20"]}
/>
</group>
<group name="RIGHT_OPTIONAL_HEADER" schSheetName={INTERFACE_SHEET} schX={10.5} schY={-6.6} pcbX={0} pcbY={0} schMaxTraceDistance="0mm" schTraceAutoLabelEnabled>
<schematicsection name="RIGHT_DEVELOPMENT_HEADER" displayName="Optional Right Development Header (DNP)" />
<MTP125_1105S1
name="J6"
displayName="J6 DNP"
doNotPlace
schX={0}
schY={0}
schWidth="3.2mm"
schHeight="3.1mm"
pcbX={26.5}
pcbY={17}
pcbRotation={90}
footprint={<footprint />}
connections={{ pin1: N.V3V3 }}
noConnect={["pin2", "pin3", "pin4", "pin5"]}
/>
</group>
<group name="MODE_SELECTION" schSheetName={INTERFACE_SHEET} schX={0} schY={5.3} pcbX={0} pcbY={0} schMaxTraceDistance="0mm" schTraceAutoLabelEnabled>
<schematicsection name="MODE_SWITCHES" displayName="3-Pin Serial or 8-Pin Parallel Mode Selection" />
<KH_SK22D07_G5
name="S1"
schX={-1.8}
schY={0}
pcbX={-7}
pcbY={-18}
pcbRotation={180}
connections={{ pin1: N.GP11, pin2: N.SER, pin4: N.GP12, pin5: N.RCLK }}
/>
<KH_SK22D07_G5
name="S2"
schX={1.8}
schY={0}
pcbX={5}
pcbY={-18}
pcbRotation={180}
connections={{ pin1: N.GP13, pin2: N.SRCLK, pin4: N.V3V3, pin5: N.OE, pin6: N.DGND }}
/>
<resistor name="R11" resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={-2.7} schY={2} schRotation={90} pcbX={-14} pcbY={-11} connections={{ pin1: N.IN1, pin2: N.GP11 }} />
<resistor name="R12" resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={-0.9} schY={2} schRotation={90} pcbX={-7} pcbY={-11} connections={{ pin1: N.IN2, pin2: N.GP12 }} />
<resistor name="R13" resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={1.2} schY={2} schRotation={90} pcbX={-3.5} pcbY={-11} connections={{ pin1: N.IN3, pin2: N.GP13 }} />
</group>
<group name="PARALLEL_INPUT_LINKS" schSheetName={CONTROL_SHEET} schX={-5.5} schY={1.2} pcbX={0} pcbY={0} schMaxTraceDistance="0.75mm" schTraceAutoLabelEnabled>
<schematicsection name="PARALLEL_INPUT_RESISTORS" displayName="Parallel Input Link Resistors" />
<resistor name="R8" resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={0} schY={3} pcbX={-18} pcbY={-5} connections={{ pin1: N.GP8, pin2: N.IN4 }} />
<resistor name="R6" displayName="R6 DNP" doNotPlace resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={0} schY={1.5} pcbX={-18} pcbY={-9} connections={{ pin1: N.GP6, pin2: N.IN5 }} />
<resistor name="R2" displayName="R2 DNP" doNotPlace resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={0} schY={0} pcbX={-18} pcbY={2} connections={{ pin1: N.GP2, pin2: N.IN6 }} />
<resistor name="R9" displayName="R9 DNP" doNotPlace resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={0} schY={-1.5} pcbX={-18} pcbY={5.5} connections={{ pin1: N.GP9, pin2: N.IN7 }} />
<resistor name="R10" displayName="R10 DNP" doNotPlace resistance="560ohm" footprint="0603" manufacturerPartNumber="0603WAF5600T5E" supplierPartNumbers={{ jlcpcb: ["C23204"] }} schX={0} schY={-3} pcbX={-18} pcbY={9} connections={{ pin1: N.GP10, pin2: N.IN8 }} />
</group>
<group name="SERIAL_CONTROL" schSheetName={CONTROL_SHEET} schX={0} schY={4} pcbX={0} pcbY={0} schMaxTraceDistance="0.9mm" schTraceAutoLabelEnabled>
<schematicsection name="SHIFT_REGISTER" displayName="SN74HC595 Serial-to-Parallel Control" />
<SN74HC595DR
name="U1"
schX={0}
schY={0.4}
schWidth="5.5mm"
schHeight="8.5mm"
pcbX={3}
pcbY={-5.5}
pcbRotation={90}
connections={{ GND: N.DGND, SRCLR: N.V3V3, SRCLK: N.SRCLK, RCLK: N.RCLK, OE: N.OE, SER: N.SER, QA: N.IN1, QB: N.IN2, QC: N.IN3, QD: N.IN4, QE: N.IN5, QF: N.IN6, QG: N.IN7, QH1: N.IN8, VCC: N.V3V3 }}
noConnect={["QH2"]}
/>
<capacitor name="C2" capacitance="0.1uF" footprint="0603" manufacturerPartNumber="CC0603KRX7R7BB104" supplierPartNumbers={{ jlcpcb: ["C14663"] }} schX={0} schY={-4.55} pcbX={9.5} pcbY={-5.5} pcbRotation={90} connections={{ pin1: N.V3V3, pin2: N.DGND }} />
</group>
<group name="DRIVER_OUTPUTS" schSheetName={DRIVER_SHEET} schX={-4.5} schY={1.5} pcbX={0} pcbY={0} schMaxTraceDistance="0.9mm" schTraceAutoLabelEnabled>
<schematicsection name="DARLINGTON_AND_MOSFET_OUTPUTS" displayName="ULN2003A and Eighth MOSFET Output" />
<ULN2003ADR
name="U2"
schX={0.2}
schY={0.1}
schWidth="5.2mm"
schHeight="8.5mm"
pcbX={7.5}
pcbY={8}
pcbRotation={90}
connections={{ COM: N.COM, E: N.AGND, "1B": N.IN2, "2B": N.IN3, "3B": N.IN4, "4B": N.IN5, "5B": N.IN6, "6B": N.IN7, "7B": N.IN8 }}
/>
<ULN2803ADWR
name="U3"
displayName="U3 ULN2803ADW DNP"
doNotPlace
schX={0.3}
schY={-5.8}
schWidth="5.2mm"
schHeight="2.1mm"
pcbX={7.5}
pcbY={8}
pcbRotation={90}
footprint={<footprint />}
connections={{ COM: N.COM, GND: N.AGND, "1B": N.IN1, "2B": N.IN2, "3B": N.IN3, "4B": N.IN4, "5B": N.IN5, "6B": N.IN6, "7B": N.IN7, "8B": N.IN8, "1C": N.M1_CH1, "2C": N.M1_CH2, "3C": N.M1_CH3, "4C": N.M1_CH4, "5C": N.M2_CH5, "6C": N.M2_CH6, "7C": N.M2_CH7, "8C": N.M2_CH8 }}
/>
<CSD17571Q2
name="Q1"
schX={-4.3}
schY={-5.8}
pcbX={-2}
pcbY={7}
connections={{ gate: N.IN1, source: N.AGND }}
/>
<testpoint name="TP1" footprintVariant="pad" padShape="circle" padDiameter="1.4mm" schX={-3.6} schY={3.9} pcbX={-7} pcbY={4} connections={{ pin1: N.IN1 }} />
<testpoint name="TP2" footprintVariant="pad" padShape="circle" padDiameter="1.4mm" schX={-3.6} schY={2.2} pcbX={-7} pcbY={1} connections={{ pin1: N.IN2 }} />
<testpoint name="TP3" footprintVariant="pad" padShape="circle" padDiameter="1.4mm" schX={-3.6} schY={0.5} pcbX={-11.75} pcbY={-0.8} connections={{ pin1: N.IN3 }} />
<testpoint name="TP4" footprintVariant="pad" padShape="circle" padDiameter="1.4mm" schX={-3.6} schY={-1.2} pcbX={-7} pcbY={-5} connections={{ pin1: N.IN4 }} />
</group>
<group name="MOTOR_POWER_INPUT" schSheetName={POWER_SHEET} schX={1.8} schY={0} pcbX={0} pcbY={0} schMaxTraceDistance="1.2mm" schTraceAutoLabelEnabled>
<schematicsection name="MOTOR_POWER_ORING" displayName="Motor Power Input and Supply OR-ing" />
<HX_PH254_01_02_Z_L11_5_male_header_connector name="J9" schX={-5.1} schY={1.4} schWidth="2.7mm" schHeight="2.0mm" pcbX={23.5} pcbY={24} pcbRotation={90} connections={{ pin1: N.VIN, pin2: N.AGND }} />
<SS24FL name="D7" displayName="D7 DB2W40200L" schX={-2.8} schY={1.4} pcbX={18.5} pcbY={20.5} connections={{ anode: N.VIN, cathode: N.VCC }} />
<SS24FL name="D8" displayName="D8 DB2W40200L" schX={-1.4} schY={1.4} pcbX={24} pcbY={16} pcbRotation={180} connections={{ anode: N.V5, cathode: N.VCC }} />
<capacitor name="C1" capacitance="1uF" footprint="0603" manufacturerPartNumber="CL10A105KB8NNNC" supplierPartNumbers={{ jlcpcb: ["C15849"] }} schX={0} schY={1.4} schRotation={90} pcbX={20} pcbY={16.5} pcbRotation={90} connections={{ pin1: N.VCC, pin2: N.AGND }} />
<resistor name="R15" resistance="0ohm" footprint="0603" manufacturerPartNumber="0603WAF0000T5E" supplierPartNumbers={{ jlcpcb: ["C21189"] }} schX={1.4} schY={1.4} pcbX={20} pcbY={13.5} connections={{ pin1: N.AGND, pin2: N.DGND }} />
</group>
<group name="FLYBACK_AND_MOTOR_CONNECTORS" schSheetName={DRIVER_SHEET} schX={5} schY={2.8} pcbX={0} pcbY={0} schMaxTraceDistance="1.2mm" schTraceAutoLabelEnabled>
<schematicsection name="FLYBACK_AND_MOTOR_OUTPUTS" displayName="Flyback Clamp and Motor Connectors" />
<MMSZ5242B name="D5" displayName="D5 12V" schX={-4} schY={-1.2} pcbX={17} pcbY={11} pcbRotation={90} connections={{ anode: N.COM, cathode: N.VCC }} />
<resistor name="R14" resistance="0ohm" footprint="0603" manufacturerPartNumber="0603WAF0000T5E" supplierPartNumbers={{ jlcpcb: ["C21189"] }} schX={-2} schY={-1.2} pcbX={20} pcbY={10} pcbRotation={90} connections={{ pin1: N.VCC, pin2: N.COM }} />
<SS24FL name="D6" displayName="D6 DB2W40200L" schX={0} schY={-1.2} pcbX={-2} pcbY={11} pcbRotation={90} connections={{ cathode: N.COM }} />
<capacitor name="C3" capacitance="0.1uF" footprint="0603" manufacturerPartNumber="CC0603KRX7R7BB104" supplierPartNumbers={{ jlcpcb: ["C14663"] }} schX={2} schY={-1.2} schRotation={90} pcbX={12.5} pcbY={13.5} pcbRotation={90} connections={{ pin1: N.COM, pin2: N.AGND }} />
<A_2_54_1_6P_ name="J7" schX={3.2} schY={0.7} schWidth="3.2mm" schHeight="3.2mm" pcbX={-10} pcbY={24.5} connections={{ pin5: N.VCC, pin6: N.VCC }} />
<A_2_54_1_6P_ name="J8" schX={6.4} schY={0.7} schWidth="3.2mm" schHeight="3.2mm" pcbX={10} pcbY={24.5} connections={{ pin5: N.VCC, pin6: N.VCC }} />
</group>
<group name="MOTOR_OUTPUT_NETS" schSheetName={DRIVER_SHEET} schX={0} schY={0} pcbX={0} pcbY={0}>
<trace name="M1_CH1" path={[".Q1 > .drain", N.M1_CH1, ".D6 > .anode", ".J7 > .pin1"]} width="0.5mm" />
<trace name="M1_CH2" path={[".U2 > .1C", N.M1_CH2, ".J7 > .pin2"]} width="0.5mm" />
<trace name="M1_CH3" path={[".U2 > .2C", N.M1_CH3, ".J7 > .pin3"]} width="0.5mm" />
<trace name="M1_CH4" path={[".U2 > .3C", N.M1_CH4, ".J7 > .pin4"]} width="0.5mm" />
<trace name="M2_CH5" path={[".U2 > .4C", N.M2_CH5, ".J8 > .pin1"]} width="0.5mm" />
<trace name="M2_CH6" path={[".U2 > .5C", N.M2_CH6, ".J8 > .pin2"]} width="0.5mm" />
<trace name="M2_CH7" path={[".U2 > .6C", N.M2_CH7, ".J8 > .pin3"]} width="0.5mm" />
<trace name="M2_CH8" path={[".U2 > .7C", N.M2_CH8, ".J8 > .pin4"]} width="0.5mm" />
</group>
<group name="LED_INDICATORS" schSheetName={CONTROL_SHEET} schX={0} schY={-4.2} pcbX={0} pcbY={0} schMaxTraceDistance="0.75mm" schTraceAutoLabelEnabled>
<schematicsection name="INPUT_LED_INDICATORS" displayName="IN1–IN4 Green LED Indicators" />
<A_19_21_GHC_YR1S2_4T name="D1" displayName="D1 Green" schX={-5.2} schY={0.35} pcbX={-14} pcbY={7} connections={{ pin1: N.IN1, pin2: N.LED1_R }} />
<resistor name="R1" resistance="1kohm" footprint="0603" manufacturerPartNumber="0603WAF1001T5E" supplierPartNumbers={{ jlcpcb: ["C21190"] }} schX={-5.2} schY={-1.25} pcbX={-14} pcbY={4.5} pcbRotation={90} connections={{ pin1: N.LED1_R, pin2: N.LED_RETURN }} />
<A_19_21_GHC_YR1S2_4T name="D2" displayName="D2 Green" schX={-1.9} schY={0.35} pcbX={-9.5} pcbY={7} connections={{ pin1: N.IN2, pin2: N.LED2_R }} />
<resistor name="R7" resistance="1kohm" footprint="0603" manufacturerPartNumber="0603WAF1001T5E" supplierPartNumbers={{ jlcpcb: ["C21190"] }} schX={-1.9} schY={-1.25} pcbX={-9.5} pcbY={4.5} pcbRotation={90} connections={{ pin1: N.LED2_R, pin2: N.LED_RETURN }} />
<A_19_21_GHC_YR1S2_4T name="D3" displayName="D3 Green" schX={1.4} schY={0.35} pcbX={-14} pcbY={0} connections={{ pin1: N.IN3, pin2: N.LED3_R }} />
<resistor name="R3" resistance="1kohm" footprint="0603" manufacturerPartNumber="0603WAF1001T5E" supplierPartNumbers={{ jlcpcb: ["C21190"] }} schX={1.4} schY={-1.25} pcbX={-14} pcbY={-2.5} pcbRotation={90} connections={{ pin1: N.LED3_R, pin2: N.LED_RETURN }} />
<A_19_21_GHC_YR1S2_4T name="D4" displayName="D4 Green" schX={4.7} schY={0.35} pcbX={-9.5} pcbY={0} connections={{ pin1: N.IN4, pin2: N.LED4_R }} />
<resistor name="R4" resistance="1kohm" footprint="0603" manufacturerPartNumber="0603WAF1001T5E" supplierPartNumbers={{ jlcpcb: ["C21190"] }} schX={4.7} schY={-1.25} pcbX={-9.5} pcbY={-2.5} pcbRotation={90} connections={{ pin1: N.LED4_R, pin2: N.LED_RETURN }} />
<resistor name="R5" resistance="0ohm" footprint="0603" manufacturerPartNumber="0603WAF0000T5E" supplierPartNumbers={{ jlcpcb: ["C21189"] }} schX={6.2} schY={-0.45} pcbX={-19} pcbY={12} pcbRotation={90} connections={{ pin1: N.LED_RETURN, pin2: N.DGND }} />
</group>
<keepout shape="rect" pcbX={-11.100068} pcbY={-18} width="2.2mm" height="3.4mm" layers={["top", "inner1", "inner2", "bottom"]} />
<keepout shape="rect" pcbX={-2.899932} pcbY={-18} width="2.2mm" height="3.4mm" layers={["top", "inner1", "inner2", "bottom"]} />
<keepout shape="rect" pcbX={0.899932} pcbY={-18} width="2.2mm" height="3.4mm" layers={["top", "inner1", "inner2", "bottom"]} />
<keepout shape="rect" pcbX={9.100068} pcbY={-18} width="2.2mm" height="3.4mm" layers={["top", "inner1", "inner2", "bottom"]} />
<copperpour name="AGND_BOTTOM_POUR" layer="bottom" connectsTo={N.AGND} clearance="0.25mm" />
</board>
)
}
Related Packages
More from this authortscircuit/autorouting-dataset-01This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.
Similar packageabse/boostxl-sharp128This code defines a printed circuit board (PCB) with various surface-mount resistors, capacitors, inductors, and integrated circuits, including power management components and interface connectors, for a TI-based LCD and microSD module using 0603 and other package types.