tscircuit/boosters
This code defines PCB schematics, footprints, and 3D CAD models for various integrated circuits, connectors, sensors, and electronic components used in TI booster packs and modules.
- Version
- 0.1.19
- License
- unset
- Stars
- 0
boostxl-rs232/index.circuit.tsx
PCB
Schematic
import { D_DMR009PF_D002 } from "./imports/D_DMR009PF_D002";
import { HTSW_103_07_T_S } from "./imports/HTSW_103_07_T_S";
import { LP2985_18DBVR } from "./imports/LP2985_18DBVR";
import { TRS3122ERGER } from "./imports/TRS3122ERGER";
const SCHEMATIC_SHEETS = {
core: "rs232-core-power",
status: "status-test",
interface: "interface-routing",
} as const;
/**
* Placement-faithful BOOSTXL-RS232 Rev 1.0 reconstruction.
* Connectivity and designators follow TI SLLU250 Figure 12; component placement
* follows Figures 13/14 and TI's orthographic top/bottom photographs.
*/
export const BOOSTXL_RS232 = () => (
<board
name="BOOSTXL_RS232"
width="65.42mm"
height="57.8mm"
layers={2}
solderMaskColor="#c51f2e"
defaultTraceWidth="0.15mm"
minViaHoleDiameter="0.3mm"
minViaPadDiameter="0.45mm"
autorouter={{
preset: "auto_local",
local: true,
traceClearance: "0.15mm",
}}
autorouterEffortLevel="5x"
placementDrcChecksDisabled
schTraceAutoLabelEnabled
schMaxTraceDistance="1.2mm"
>
<schematicsheet
name={SCHEMATIC_SHEETS.core}
displayName="RS-232 Transceiver and Power"
sheetIndex={1}
/>
<schematicsheet
name={SCHEMATIC_SHEETS.status}
displayName="Status LEDs and Test Header"
sheetIndex={2}
/>
<schematicsheet
name={SCHEMATIC_SHEETS.interface}
displayName="Interface and Signal Routing"
sheetIndex={3}
/>
<hole name="H1" diameter="3.2mm" pcbX={-28.45} pcbY={24.4} />
<hole name="H2" diameter="3.2mm" pcbX={28.45} pcbY={24.4} />
<hole name="H3" diameter="3.2mm" pcbX={-28.45} pcbY={-26.4} />
<hole name="H4" diameter="3.2mm" pcbX={28.45} pcbY={-26.4} />
<copperpour
name="GND_BOTTOM"
layer="bottom"
connectsTo="net.GND"
padMargin="0.2mm"
traceMargin="0.15mm"
boardEdgeMargin="0.3mm"
/>
<group
name="RS232_CORE_POWER"
schSheetName={SCHEMATIC_SHEETS.core}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schMaxTraceDistance="1.2mm"
schTraceAutoLabelEnabled
>
{/* Imported directly from the live JLCPCB catalog, with exact CAD. */}
<D_DMR009PF_D002
name="J10"
pcbX={0}
pcbY={22.1}
pcbRotation={90}
schX={12}
schY={2.5}
schWidth="4mm"
schHeight="5mm"
connections={{
pin2: "net.RX1",
pin3: "net.TX1",
pin4: "net.DTR1",
pin5: "net.GND",
pin6: "net.DSR1",
pin7: "net.RTS1",
pin8: "net.CTS1",
}}
noConnect={["pin1", "pin9"]}
/>
<TRS3122ERGER
name="U1"
pcbX={0}
pcbY={10.2}
schX={1}
schY={2}
connections={{
C3_POS: "net.C3_POS",
C3_NEG: "net.C3_NEG",
RIN1: "net.TX1",
RIN2: "net.RTS1",
DOUT1: "net.RX1",
DOUT2: "net.CTS1",
DIN2: "net.CTS2",
DIN1: "net.RX2",
ROUT2: "net.RTS2",
ROUT1: "net.TX2",
INVALID: "net.INV",
FORCEOFF: "net.FORCEOFF",
FORCEON: "net.FORCEON",
C1_NEG: "net.C1_NEG",
GND: "net.GND",
VL: "net.VCC",
VCC: "net.VCC",
V_POS: "net.V_POS",
C1_POS: "net.C1_POS",
C2_POS: "net.C2_POS",
C2_NEG: "net.C2_NEG",
V_NEG: "net.V_NEG",
EP: "net.GND",
}}
noConnect={["NC1", "NC2"]}
/>
<LP2985_18DBVR
name="U2"
pcbX={-19.2}
pcbY={8.9}
pcbRotation={90}
schX={-8}
schY={2}
schWidth="3mm"
schHeight="2mm"
connections={{
VIN: "net.V3V3",
GND: "net.GND",
pin3: "net.V3V3",
BYPASS: "net.LDO_BYPASS",
VOUT: "net.V1V8",
}}
/>
<HTSW_103_07_T_S
name="J12"
footprint={
<footprint>
<platedhole portHints={["pin1"]} pcbX="-2.54mm" pcbY="0mm" holeDiameter="1.1mm" rectPadWidth="1.7mm" rectPadHeight="1.7mm" shape="circular_hole_with_rect_pad" />
<platedhole portHints={["pin2"]} pcbX="0mm" pcbY="0mm" holeDiameter="1.1mm" outerDiameter="1.7mm" shape="circle" />
<platedhole portHints={["pin3"]} pcbX="2.54mm" pcbY="0mm" holeDiameter="1.1mm" outerDiameter="1.7mm" shape="circle" />
<silkscreenrect width="7.7mm" height="2.5mm" />
</footprint>
}
pcbX={-14.4}
pcbY={5.9}
pcbRotation={90}
manufacturerPartNumber="TSW-103-07-G-S"
schX={-8}
schY={5}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin2", "pin3"],
},
}}
schPinStyle={{
pin1: { marginTop: "0.8mm" },
pin3: { marginBottom: "0.8mm" },
}}
connections={{
pin1: "net.V3V3",
pin2: "net.VCC",
pin3: "net.V1V8",
}}
/>
{/* Charge-pump capacitors C1-C6 sit around U1 exactly as on the reference. */}
<capacitor
name="C1"
capacitance="100nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C14663"] }}
pcbX={0}
pcbY={6.4}
schX={-4.2}
schY={0.5}
schRotation={90}
connections={{ pin2: "net.C1_POS", pin1: "net.C1_NEG" }}
/>
<capacitor
name="C2"
capacitance="100nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C14663"] }}
pcbX={3.5}
pcbY={12.0}
pcbRotation={90}
schX={-4.2}
schY={-2}
schRotation={90}
connections={{ pin2: "net.C2_POS", pin1: "net.C2_NEG" }}
/>
<capacitor
name="C3"
capacitance="100nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C14663"] }}
pcbX={0}
pcbY={13.8}
schX={7}
schY={5.8}
schRotation={90}
connections={{ pin2: "net.C3_POS", pin1: "net.C3_NEG" }}
/>
<capacitor
name="C4"
capacitance="100nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C14663"] }}
pcbX={4.6}
pcbY={8.8}
pcbRotation={90}
schX={-4.2}
schY={4.7}
connections={{ pin1: "net.V_POS", pin2: "net.GND" }}
/>
<capacitor
name="C5"
capacitance="100nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C14663"] }}
pcbX={5.5}
pcbY={13.5}
pcbRotation={90}
schX={7.4}
schY={-3.4}
schRotation={270}
connections={{ pin1: "net.V_NEG", pin2: "net.GND" }}
/>
<capacitor
name="C6"
capacitance="100nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C14663"] }}
pcbX={4.6}
pcbY={5.8}
pcbRotation={90}
schX={-3.2}
schY={6}
connections={{ pin1: "net.VCC", pin2: "net.GND" }}
/>
{/* 1.8-V regulator support parts. */}
<capacitor
name="C7"
capacitance="1uF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C111590"] }}
pcbX={-22.5}
pcbY={6.8}
schX={-11.5}
schY={2}
schRotation={90}
connections={{ pin2: "net.V3V3", pin1: "net.GND" }}
/>
<capacitor
name="C8"
capacitance="2.2uF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C23630"] }}
pcbX={-21.9}
pcbY={12.1}
schX={-5}
schY={1}
schRotation={270}
connections={{ pin1: "net.V1V8", pin2: "net.GND" }}
/>
<capacitor
name="C9"
capacitance="10nF"
footprint="cap0603"
supplierPartNumbers={{ jlcpcb: ["C57112"] }}
pcbX={-18}
pcbY={5.8}
schX={-10.5}
schY={0.5}
schRotation={270}
connections={{ pin1: "net.LDO_BYPASS", pin2: "net.GND" }}
/>
{/* Pull-ups and DB-9 pin-6 link. */}
<resistor
name="R1"
resistance="10k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C25804"] }}
pcbX={-4}
pcbY={5.1}
schX={-5.5}
schY={-5.5}
schRotation={270}
connections={{ pin1: "net.VCC", pin2: "net.RX2" }}
/>
<resistor
name="R2"
resistance="10k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C25804"] }}
pcbX={-1.4}
pcbY={3.7}
pcbRotation={90}
schX={-4.3}
schY={-5.5}
schRotation={270}
connections={{ pin1: "net.VCC", pin2: "net.CTS2" }}
/>
<resistor
name="R3"
resistance="10k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C25804"] }}
pcbX={8}
pcbY={7.5}
pcbRotation={90}
schX={-3.1}
schY={-5.5}
schRotation={270}
connections={{ pin1: "net.VCC", pin2: "net.FORCEON" }}
/>
<resistor
name="R4"
resistance="10k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C25804"] }}
pcbX={6.2}
pcbY={5.8}
pcbRotation={90}
schX={-1.9}
schY={-5.5}
schRotation={270}
connections={{ pin1: "net.VCC", pin2: "net.FORCEOFF" }}
/>
<resistor
name="R5"
resistance="0ohm"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C21189"] }}
pcbX={-7.2}
pcbY={17.8}
schX={10.5}
schY={1.9}
connections={{ pin1: "net.DTR1", pin2: "net.DSR1" }}
/>
</group>
{/* Power LED and four antiparallel RS-232 status pairs. */}
<group
name="STATUS_AND_TEST"
schSheetName={SCHEMATIC_SHEETS.status}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schMaxTraceDistance="1.2mm"
schTraceAutoLabelEnabled
>
<resistor
name="R6"
resistance="1.96k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C2998107"] }}
pcbX={-25}
pcbY={7}
pcbRotation={90}
schX={-1}
schY={5}
schRotation={270}
connections={{ pin1: "net.V3V3", pin2: "net.PWR_LED" }}
/>
<led
name="D1"
color="green"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C125094"] }}
pcbX={-26}
pcbY={10}
pcbRotation={90}
schX={-1}
schY={1}
schRotation={270}
connections={{ pin1: "net.PWR_LED", pin2: "net.GND" }}
/>
<resistor
name="R7"
resistance="5.23k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C23068"] }}
pcbX={-7.8}
pcbY={10.5}
schX={3}
schY={5}
schRotation={270}
connections={{ pin1: "net.RX1", pin2: "net.RX1_LED" }}
/>
<led
name="D2"
color="green"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C125094"] }}
pcbX={-10.8}
pcbY={11.6}
schX={2}
schY={1}
schRotation={270}
connections={{ pin1: "net.RX1_LED", pin2: "net.GND" }}
/>
<led
name="D3"
color="red"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C2286"] }}
pcbX={-10.8}
pcbY={9.4}
schX={4}
schY={1}
schRotation={90}
connections={{ pin1: "net.GND", pin2: "net.RX1_LED" }}
/>
<resistor
name="R8"
resistance="5.23k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C23068"] }}
pcbX={7.8}
pcbY={10.5}
schX={8}
schY={5}
schRotation={90}
connections={{ pin1: "net.TX1", pin2: "net.TX1_LED" }}
/>
<led
name="D4"
color="green"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C125094"] }}
pcbX={10.8}
pcbY={11.6}
schX={7}
schY={1}
schRotation={270}
connections={{ pin1: "net.TX1_LED", pin2: "net.GND" }}
/>
<led
name="D5"
color="red"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C2286"] }}
pcbX={10.8}
pcbY={9.4}
schX={9}
schY={1}
schRotation={90}
connections={{ pin1: "net.GND", pin2: "net.TX1_LED" }}
/>
<resistor
name="R9"
resistance="5.23k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C23068"] }}
pcbX={7.8}
pcbY={15.5}
schX={3}
schY={-2}
schRotation={270}
connections={{ pin1: "net.CTS1", pin2: "net.CTS1_LED" }}
/>
<led
name="D6"
color="green"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C125094"] }}
pcbX={10.8}
pcbY={16.6}
schX={2}
schY={-6}
schRotation={270}
connections={{ pin1: "net.CTS1_LED", pin2: "net.GND" }}
/>
<led
name="D7"
color="red"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C2286"] }}
pcbX={10.8}
pcbY={14.4}
schX={4}
schY={-6}
schRotation={90}
connections={{ pin1: "net.GND", pin2: "net.CTS1_LED" }}
/>
<resistor
name="R10"
resistance="5.23k"
footprint="res0603"
supplierPartNumbers={{ jlcpcb: ["C23068"] }}
pcbX={-7.8}
pcbY={15.5}
schX={8}
schY={-2}
schRotation={270}
connections={{ pin1: "net.RTS1", pin2: "net.RTS1_LED" }}
/>
<led
name="D8"
color="green"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C125094"] }}
pcbX={-10.8}
pcbY={16.6}
schX={7}
schY={-6}
schRotation={270}
connections={{ pin1: "net.RTS1_LED", pin2: "net.GND" }}
/>
<led
name="D9"
color="red"
footprint="led0603"
supplierPartNumbers={{ jlcpcb: ["C2286"] }}
pcbX={-10.8}
pcbY={14.4}
schX={9}
schY={-6}
schRotation={90}
connections={{ pin1: "net.GND", pin2: "net.RTS1_LED" }}
/>
{/* Accessible RS-232 test header. */}
<chip
name="J11"
supplierPartNumbers={{ jlcpcb: ["C2691448"] }}
manufacturerPartNumber="PZ254V-11-04P"
pcbX={0}
pcbY={16.9}
footprint={
<footprint>
<platedhole portHints={["pin1"]} pcbX="-3.81mm" pcbY="0mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin2"]} pcbX="-1.27mm" pcbY="0mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin3"]} pcbX="1.27mm" pcbY="0mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin4"]} pcbX="3.81mm" pcbY="0mm" holeDiameter="1mm" rectPadWidth="1.5mm" rectPadHeight="1.5mm" shape="circular_hole_with_rect_pad" />
<silkscreenrect width="10mm" height="2.5mm" />
</footprint>
}
schX={-9}
schY={3.5}
schWidth="1.6mm"
schHeight="0.6mm"
schPinArrangement={{
bottomSide: {
direction: "left-to-right",
pins: ["RX1", "RTS1", "TX1", "CTS1"],
},
}}
schPinStyle={{
RX1: { marginLeft: "0.4mm" },
CTS1: { marginRight: "0.4mm" },
}}
pinLabels={{
pin1: "RX1",
pin2: "RTS1",
pin3: "TX1",
pin4: "CTS1",
}}
connections={{ pin1: "net.RX1", pin2: "net.RTS1", pin3: "net.TX1", pin4: "net.CTS1" }}
/>
</group>
{/* FORCEON/FORCEOFF/INVALID assignment header. */}
<group
name="INTERFACE_ROUTING"
schSheetName={SCHEMATIC_SHEETS.interface}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schMaxTraceDistance="1.2mm"
schTraceAutoLabelEnabled
>
<chip
name="J9"
supplierPartNumbers={{ jlcpcb: ["C2337"] }}
manufacturerPartNumber="2.54-1x40P-BREAKAWAY"
pcbX={18.3}
pcbY={10.0}
footprint={
<footprint>
<platedhole portHints={["pin1"]} pcbX="-1.27mm" pcbY="2.54mm" holeDiameter="1mm" rectPadWidth="1.5mm" rectPadHeight="1.5mm" shape="circular_hole_with_rect_pad" />
<platedhole portHints={["pin2"]} pcbX="1.27mm" pcbY="2.54mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin3"]} pcbX="-1.27mm" pcbY="0mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin4"]} pcbX="1.27mm" pcbY="0mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin5"]} pcbX="-1.27mm" pcbY="-2.54mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<platedhole portHints={["pin6"]} pcbX="1.27mm" pcbY="-2.54mm" holeDiameter="1mm" outerDiameter="1.5mm" shape="circle" />
<silkscreenrect width="5mm" height="7mm" />
</footprint>
}
schX={0}
schY={9}
schWidth="2mm"
schHeight="1.5mm"
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["FORCEON", "FORCEOFF", "INV"],
},
rightSide: {
direction: "top-to-bottom",
pins: ["GP19", "GP18", "GP14"],
},
}}
pinLabels={{
pin1: "FORCEON",
pin2: "GP19",
pin3: "FORCEOFF",
pin4: "GP18",
pin5: "INV",
pin6: "GP14",
}}
schPinStyle={{
FORCEON: { marginTop: "0.6mm" },
INV: { marginBottom: "0.6mm" },
GP19: { marginTop: "0.6mm" },
GP14: { marginBottom: "0.6mm" },
}}
connections={{
pin1: "net.FORCEON",
pin2: "net.GP19",
pin3: "net.FORCEOFF",
pin4: "net.GP18",
pin5: "net.INV",
pin6: "net.GP14",
}}
/>
{/* Left BoosterPack socket pair J1/J3. */}
<chip
name="J1"
displayName="J1"
footprint="pinrow10_p2.54mm_nopinlabels_female"
supplierPartNumbers={{ jlcpcb: ["C2897373"] }}
manufacturerPartNumber="PM254-1-10-Z-8.5"
pcbX={-23.77}
pcbY={-15}
pcbRotation={270}
schX={-4}
schY={4}
schWidth="2mm"
schHeight="2.5mm"
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["PLUS_3V3", "Analog_In_2", "LP_UART_RX", "LP_UART_TX", "GPIO_5", "Analog_In_6", "SPI_CLK", "GPIO_8", "I2C_SCL", "I2C_SDA"],
},
}}
schPinStyle={{
PLUS_3V3: { marginTop: "1.65mm" },
I2C_SDA: { marginBottom: "1.65mm" },
}}
pinLabels={{
pin1: "PLUS_3V3",
pin2: "Analog_In_2",
pin3: "LP_UART_RX",
pin4: "LP_UART_TX",
pin5: "GPIO_5",
pin6: "Analog_In_6",
pin7: "SPI_CLK",
pin8: "GPIO_8",
pin9: "I2C_SCL",
pin10: "I2C_SDA",
}}
connections={{
pin1: "net.V3V3",
pin3: "net.GP3",
pin4: "net.GP4",
pin5: "net.GP5",
pin8: "net.GP8",
}}
/>
<chip
name="J3"
footprint="pinrow10_female_p2.54mm_nosquareplating_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C2897373"] }}
manufacturerPartNumber="PM254-1-10-Z-8.5"
pcbX={-21.23}
pcbY={-15}
pcbRotation={270}
schX={4}
schY={4}
schWidth="3mm"
schHeight="2.5mm"
schPinArrangement={{
rightSide: {
direction: "top-to-bottom",
pins: ["PLUS_5V", "GND", "Analog_In_23", "Analog_In_24", "Analog_In_25", "Analog_In_I2S_WS", "Analog_In_I2S_SCLK", "Analog_Out_I2S_SDout_28", "Analog_Out_I2S_SDout_29", "Analog_Out_I2S_SDin"],
},
}}
schPinStyle={{
PLUS_5V: { marginTop: "1.65mm" },
Analog_Out_I2S_SDin: { marginBottom: "1.65mm" },
}}
pinLabels={{
pin21: ["PLUS_5V", "pin1", "1"],
pin22: ["GND", "pin2", "2"],
pin23: ["Analog_In_23", "pin3", "3"],
pin24: ["Analog_In_24", "pin4", "4"],
pin25: ["Analog_In_25", "pin5", "5"],
pin26: ["Analog_In_I2S_WS", "pin6", "6"],
pin27: ["Analog_In_I2S_SCLK", "pin7", "7"],
pin28: ["Analog_Out_I2S_SDout_28", "pin8", "8"],
pin29: ["Analog_Out_I2S_SDout_29", "pin9", "9"],
pin30: ["Analog_Out_I2S_SDin", "pin10", "10"],
}}
connections={{ PLUS_5V: "net.V5V", GND: "net.GND" }}
/>
{/* Right BoosterPack socket pair J4/J2. */}
<chip
name="J4"
displayName="J4"
footprint="pinrow10_female_p2.54mm_nosquareplating_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C2897373"] }}
manufacturerPartNumber="PM254-1-10-Z-8.5"
pcbX={21.23}
pcbY={-15}
pcbRotation={ 270}
schX={-4}
schY={-1}
schWidth="3mm"
schHeight="2.5mm"
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["PWM_GPIO_40", "PWM_GPIO_39", "PWM_GPIO_38", "PWM_GPIO_37", "Timer_Cap_GPIO_36", "Timer_Cap_GPIO_35", "GPIO_34", "GPIO_33", "GPIO_32", "GPIO_31"],
},
}}
schPinStyle={{
PWM_GPIO_40: { marginTop: "1.65mm" },
GPIO_31: { marginBottom: "1.65mm" },
}}
pinLabels={{
pin40: ["PWM_GPIO_40", "pin1", "1"],
pin39: ["PWM_GPIO_39", "pin2", "2"],
pin38: ["PWM_GPIO_38", "pin3", "3"],
pin37: ["PWM_GPIO_37", "pin4", "4"],
pin36: ["Timer_Cap_GPIO_36", "pin5", "5"],
pin35: ["Timer_Cap_GPIO_35", "pin6", "6"],
pin34: ["GPIO_34", "pin7", "7"],
pin33: ["GPIO_33", "pin8", "8"],
pin32: ["GPIO_32", "pin9", "9"],
pin31: ["GPIO_31", "pin10", "10"],
}}
/>
<chip
name="J2"
footprint="pinrow10_female_p2.54mm_nosquareplating_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C2897373"] }}
manufacturerPartNumber="PM254-1-10-Z-8.5"
pcbX={23.77}
pcbY={-15}
pcbRotation={270}
schX={4}
schY={-1}
schWidth="2mm"
schHeight="2.5mm"
schPinArrangement={{
rightSide: {
direction: "top-to-bottom",
pins: ["GND", "PWM_GPIO_19", "GPIO_18", "GPIO_17", "RST", "SPI_MOSI", "SPI_MISO", "SPI_CS_GPIO_13", "SPI_CS_GPIO_12", "GPIO_11"],
},
}}
schPinStyle={{
GND: { marginTop: "1.65mm" },
GPIO_11: { marginBottom: "1.65mm" },
}}
pinLabels={{
pin20: ["GND", "pin1", "1"],
pin19: ["PWM_GPIO_19", "pin2", "2"],
pin18: ["GPIO_18", "pin3", "3"],
pin17: ["GPIO_17", "pin4", "4"],
pin16: ["RST", "pin5", "5"],
pin15: ["SPI_MOSI", "pin6", "6"],
pin14: ["SPI_MISO", "pin7", "7"],
pin13: ["SPI_CS_GPIO_13", "pin8", "8"],
pin12: ["SPI_CS_GPIO_12", "pin9", "9"],
pin11: ["GPIO_11", "pin10", "10"],
}}
connections={{
GND: "net.GND",
PWM_GPIO_19: "net.GP19",
GPIO_18: "net.GP18",
SPI_MISO: "net.GP14",
SPI_CS_GPIO_13: "net.GP13",
SPI_CS_GPIO_12: "net.GP12",
GPIO_11: "net.GP11",
}}
/>
{/* 30-pin GPIO-select banks: J5/J6 and J7/J8. */}
<chip
name="J5"
footprint="pinrow20_rows10_cols2_p2.54mm_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C2337"] }}
manufacturerPartNumber="2.54-1x40P-BREAKAWAY"
pcbX={-10.8}
pcbY={-15}
schX={-7}
schY={-7}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin3", "pin5", "pin7", "pin9", "pin11", "pin13", "pin15", "pin17", "pin19"],
},
rightSide: {
direction: "top-to-bottom",
pins: ["pin2", "pin4", "pin6", "pin8", "pin10", "pin12", "pin14", "pin16", "pin18", "pin20"],
},
}}
connections={{
pin1: "net.CTS2",
pin2: "net.GP3",
pin3: "net.CTS2",
pin4: "net.GP4",
pin5: "net.CTS2",
pin6: "net.GP5",
pin7: "net.CTS2",
pin8: "net.GP8",
pin9: "net.CTS2",
pin10: "net.GP19",
pin11: "net.CTS2",
pin12: "net.GP18",
pin13: "net.CTS2",
pin14: "net.GP14",
pin15: "net.CTS2",
pin16: "net.GP13",
pin17: "net.CTS2",
pin18: "net.GP12",
pin19: "net.CTS2",
pin20: "net.GP11",
}}
/>
<chip
name="J6"
footprint="pinrow10_p2.54mm_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C492409"] }}
manufacturerPartNumber="PZ254V-11-10P"
pcbX={-7.0}
pcbY={-15}
pcbRotation={270}
schX={-2}
schY={-7}
schPinArrangement={{
rightSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin2", "pin3", "pin4", "pin5", "pin6", "pin7", "pin8", "pin9", "pin10"],
},
}}
connections={{
pin1: "net.RX2",
pin2: "net.RX2",
pin3: "net.RX2",
pin4: "net.RX2",
pin5: "net.RX2",
pin6: "net.RX2",
pin7: "net.RX2",
pin8: "net.RX2",
pin9: "net.RX2",
pin10: "net.RX2",
}}
/>
<chip
name="J7"
footprint="pinrow20_rows10_cols2_p2.54mm_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C2337"] }}
manufacturerPartNumber="2.54-1x40P-BREAKAWAY"
pcbX={7.0}
pcbY={-15}
schX={3}
schY={-7}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin3", "pin5", "pin7", "pin9", "pin11", "pin13", "pin15", "pin17", "pin19"],
},
rightSide: {
direction: "top-to-bottom",
pins: ["pin2", "pin4", "pin6", "pin8", "pin10", "pin12", "pin14", "pin16", "pin18", "pin20"],
},
}}
connections={{
pin1: "net.RTS2",
pin2: "net.GP3",
pin3: "net.RTS2",
pin4: "net.GP4",
pin5: "net.RTS2",
pin6: "net.GP5",
pin7: "net.RTS2",
pin8: "net.GP8",
pin9: "net.RTS2",
pin10: "net.GP19",
pin11: "net.RTS2",
pin12: "net.GP18",
pin13: "net.RTS2",
pin14: "net.GP14",
pin15: "net.RTS2",
pin16: "net.GP13",
pin17: "net.RTS2",
pin18: "net.GP12",
pin19: "net.RTS2",
pin20: "net.GP11",
}}
/>
<chip
name="J8"
footprint="pinrow10_p2.54mm_nopinlabels"
supplierPartNumbers={{ jlcpcb: ["C492409"] }}
manufacturerPartNumber="PZ254V-11-10P"
pcbX={10.8}
pcbY={-15}
pcbRotation={270}
schX={8}
schY={-7}
schPinArrangement={{
rightSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin2", "pin3", "pin4", "pin5", "pin6", "pin7", "pin8", "pin9", "pin10"],
},
}}
connections={{
pin1: "net.TX2",
pin2: "net.TX2",
pin3: "net.TX2",
pin4: "net.TX2",
pin5: "net.TX2",
pin6: "net.TX2",
pin7: "net.TX2",
pin8: "net.TX2",
pin9: "net.TX2",
pin10: "net.TX2",
}}
/>
</group>
</board>
);
export default BOOSTXL_RS232;
Related Packages
More from this authortscircuit/autorouting-dataset-01This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.
Similar packageabse/boostxl-sharp128This code defines a printed circuit board (PCB) with various surface-mount resistors, capacitors, inductors, and integrated circuits, including power management components and interface connectors, for a TI-based LCD and microSD module using 0603 and other package types.