tscircuit/boosters
This code defines PCB schematics, footprints, and 3D CAD models for various integrated circuits, connectors, sensors, and electronic components used in TI booster packs and modules.
- Version
- 0.1.19
- License
- unset
- Stars
- 0
boostxl-audio/index.circuit.tsx
PCB
Schematic
import { A_67996_406HLF } from "./imports/A_67996_406HLF";
import { A_3352T_1_104LF } from "./imports/A_3352T_1_104LF";
import { DAC8311IDCKT } from "./imports/DAC8311IDCKT";
import { FS_3013 } from "./imports/FS_3013";
import { POM_2242P_C33_R } from "./imports/POM_2242P_C33_R";
import { SJ_43516_SMT_TR } from "./imports/SJ_43516_SMT_TR";
import { SSQ_110_03_T_D } from "./imports/SSQ_110_03_T_D";
import { TPA301DGNR } from "./imports/TPA301DGNR";
import { TS3A225ERTER } from "./imports/TS3A225ERTER";
import { TS3A44159PWR } from "./imports/TS3A44159PWR";
import { TLV2760IDBVTG4 } from "./imports/TLV2760IDBVTG4";
const LAUNCHPAD_SHEET = "LaunchPad Headers and Signal Selection";
const DAC_SHEET = "14-bit DAC and PWM Audio Source";
const HEADSET_SHEET = "Headset Jack and Detection";
const SWITCH_SHEET = "Analog Audio Routing Switch";
const MICROPHONE_SHEET = "Electret Microphone Preamplifier";
const LOUDSPEAKER_SHEET = "Loudspeaker Amplifier and Output";
const TI_0603_CAP = "cap_p1.6mm_pw0.95mm_ph1mm";
const TI_0603_RES = "res_p1.6mm_pw0.95mm_ph1mm";
const N = {
V3V3: "net.V3V3",
V5: "net.V5",
GND: "net.GND",
MIC_PWR_PRI: "net.MIC_PWR_P",
MIC_PWR_ALT: "net.MIC_PWR_A",
MIC_PWR: "net.MIC_PWR",
MIC_OUT_PRI: "net.MIC_OUT_P",
MIC_OUT_ALT: "net.MIC_OUT_A",
MIC_OUT: "net.MIC_OUT",
DAC_SCLK: "net.DAC_SCLK",
DAC_SCLK_IC: "net.SCLK_IC",
DAC_SYNC: "net.DAC_SYNC",
DAC_SYNC_IC: "net.SYNC_IC",
DAC_MOSI: "net.DAC_MOSI",
DAC_MOSI_IC: "net.MOSI_IC",
AMP_ON_PRI: "net.AMP_ON_PRI",
AMP_ON_ALT: "net.AMP_ON_ALT",
AUDIO_SHUTDOWN: "net.AMP_SD",
PWM_PRI: "net.PWM_PRI",
PWM_ALT: "net.PWM_ALT",
PWM_AUDIO: "net.PWM_AUDIO",
LP_DAC_OUT: "net.LP_DAC",
ONBOARD_DAC_OUT: "net.DAC_ON",
DAC_SELECTED: "net.DAC_SEL",
PWM_FILTER: "net.PWM_FILTER",
AUDIO_OUT: "net.AUDIO_OUT",
JACK_SLEEVE: "net.JACK_SLEEVE",
JACK_RING2: "net.JACK_RING2",
JACK_TIP_SWITCH: "net.TIP_SW",
HP_LEFT: "net.HP_LEFT",
HP_RIGHT: "net.HP_RIGHT",
HEADSET_MIC: "net.HEADSET_MIC",
MIC_PRESENT_OUT: "net.MIC_PRES",
MIC_DET: "net.MIC_DET",
SPEAKER_DET: "net.SPK_DET",
MICN_PULLDOWN: "net.MICN_PD",
ONBOARD_MIC: "net.MIC_ON",
MIC_RAW: "net.MIC_RAW",
MIC_INPUT: "net.MIC_INPUT",
MIC_BIAS_TOP: "net.MIC_BIAS",
MIC_PRE_RAIL: "net.MIC_PRE",
MIC_FB_RETURN: "net.FB_RET",
MIC_FB: "net.MIC_FB",
OP_OUT: "net.OP_OUT",
TERM_NO3: "net.TERM_NO3",
TERM_COM3: "net.TERM_COM3",
TERM_NC3: "net.TERM_NC3",
DUMMY_LOAD: "net.DMY_LOAD",
DUMMY_RC: "net.DMY_RC",
AMP_INPUT_PRE: "net.AMP_IN_PRE",
AMP_INPUT: "net.AMP_INPUT",
AMP_BIAS: "net.AMP_BIAS",
AMP_AUDIO_OUT_P: "net.AMP_OUT_P",
AMP_AUDIO_OUT_N: "net.AMP_OUT_N",
POT_IN: "net.POT_IN",
LOUDSPEAKER_OUT_P: "net.LS_OUT_P",
LOUDSPEAKER_OUT_N: "net.LS_OUT_N",
SPEAKER_PLUS: "net.SPK_P",
HEADPHONE_OUT: "net.HP_OUT",
} as const;
export default function Circuit() {
return (
<board
name="BOOSTXL_AUDIO"
width="58.42mm"
height="76.2mm"
layers={2}
solderMaskColor="red"
silkscreenColor="white"
defaultTraceWidth="0.25mm"
minViaHoleDiameter="0.3mm"
minViaPadDiameter="0.45mm"
>
<schematicsheet
name={LAUNCHPAD_SHEET}
displayName={LAUNCHPAD_SHEET}
sheetIndex={1}
/>
<schematicsheet name={DAC_SHEET} displayName={DAC_SHEET} sheetIndex={2} />
<schematicsheet
name={HEADSET_SHEET}
displayName={HEADSET_SHEET}
sheetIndex={3}
/>
<schematicsheet
name={SWITCH_SHEET}
displayName={SWITCH_SHEET}
sheetIndex={4}
/>
<schematicsheet
name={MICROPHONE_SHEET}
displayName={MICROPHONE_SHEET}
sheetIndex={5}
/>
<schematicsheet
name={LOUDSPEAKER_SHEET}
displayName={LOUDSPEAKER_SHEET}
sheetIndex={6}
/>
<silkscreentext
text="BOOSTXL-AUDIO"
pcbX={0}
pcbY={35.7}
fontSize="1.5mm"
anchorAlignment="center"
/>
<silkscreentext
text="TI BOOSTERPACK RECONSTRUCTION"
pcbX={0}
pcbY={33.5}
fontSize="0.7mm"
anchorAlignment="center"
/>
<silkscreentext
text="MIC"
pcbX={-3.9}
pcbY={-34.8}
fontSize="0.8mm"
anchorAlignment="center"
/>
<silkscreentext
text="VOLUME"
pcbX={-22}
pcbY={12.7}
fontSize="0.8mm"
anchorAlignment="center"
pcbRotation={90}
/>
<silkscreentext
text="HEADSET"
pcbX={17.4}
pcbY={19.6}
fontSize="0.8mm"
anchorAlignment="center"
/>
<group
name="LAUNCHPAD_INTERFACE"
schSheetName={LAUNCHPAD_SHEET}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schTraceAutoLabelEnabled={false}
schMaxTraceDistance="1.5mm"
>
<schematicsection
name="LAUNCHPAD_HEADERS"
displayName="LaunchPad Headers and Signal-Selection Links"
/>
<SSQ_110_03_T_D
name="J1J3"
displayName="J1 / J3 LaunchPad Left"
schX={-8}
schY={0}
schWidth="3.6mm"
schHeight="2.8mm"
schPinArrangement={{
leftSide: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19],
rightSide: [2, 4, 6, 8, 10, 12, 14, 16, 18, 20],
}}
pcbX={-21.59}
pcbY={-22.86}
pcbRotation={90}
layer="bottom"
connections={{
pin2: N.V3V3,
pin10: ".R1 > .pin1",
pin12: ".R4 > .pin2",
pin14: N.DAC_SCLK,
pin1: N.V5,
pin3: N.GND,
pin11: ".R5 > .pin2",
pin19: N.LP_DAC_OUT,
}}
noConnect={[
"pin4",
"pin5",
"pin6",
"pin7",
"pin8",
"pin9",
"pin13",
"pin15",
"pin16",
"pin17",
"pin18",
"pin20",
]}
/>
<SSQ_110_03_T_D
name="J2J4"
displayName="J2 / J4 LaunchPad Right"
schX={8}
schY={0}
schWidth="3.6mm"
schHeight="2.8mm"
schPinArrangement={{
leftSide: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19],
rightSide: [2, 4, 6, 8, 10, 12, 14, 16, 18, 20],
}}
pcbX={21.59}
pcbY={-22.86}
pcbRotation={90}
layer="bottom"
connections={{
pin1: N.GND,
pin3: ".R9 > .pin1",
pin11: N.DAC_MOSI,
pin15: ".R6 > .pin1",
pin17: N.DAC_SYNC,
pin4: ".R10 > .pin1",
pin6: ".R8 > .pin1",
pin20: ".R3 > .pin1",
}}
noConnect={[
"pin2",
"pin5",
"pin7",
"pin8",
"pin9",
"pin10",
"pin12",
"pin13",
"pin14",
"pin16",
"pin18",
"pin19",
]}
/>
<resistor
name="R1"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-4}
schY={0.7}
pcbX={-15.494}
pcbY={-19.177}
pcbRotation={180}
connections={{ pin2: N.MIC_PWR }}
/>
<resistor
name="R3"
displayName="R3 DNP"
doNotPlace
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={11.7}
schY={-0.9}
pcbX={-15.494}
pcbY={-20.955}
pcbRotation={180}
connections={{ pin2: N.MIC_PWR }}
/>
<resistor
name="R4"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-4}
schY={-0.7}
pcbX={-15.621}
pcbY={-24.384}
pcbRotation={180}
connections={{ pin1: N.MIC_OUT }}
/>
<resistor
name="R5"
displayName="R5 DNP"
doNotPlace
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-12}
schY={-0.1}
pcbX={-15.621}
pcbY={-26.162}
pcbRotation={180}
connections={{ pin1: N.MIC_OUT }}
/>
<resistor
name="R6"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={4}
schY={-0.5}
pcbX={16.129}
pcbY={-27.94}
connections={{ pin2: N.AUDIO_SHUTDOWN }}
/>
<resistor
name="R8"
displayName="R8 DNP"
doNotPlace
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={11.8}
schY={-0.1}
pcbX={16.129}
pcbY={-26.162}
connections={{ pin2: N.AUDIO_SHUTDOWN }}
/>
<resistor
name="R9"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={4}
schY={0.7}
pcbX={16.129}
pcbY={-15.748}
connections={{ pin2: N.PWM_AUDIO }}
/>
<resistor
name="R10"
displayName="R10 DNP"
doNotPlace
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={11.8}
schY={1.1}
pcbX={16.129}
pcbY={-13.97}
connections={{ pin2: N.PWM_AUDIO }}
/>
</group>
<group
name="DAC_SIGNAL_SOURCE"
schSheetName={DAC_SHEET}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schTraceAutoLabelEnabled={false}
schMaxTraceDistance="1.5mm"
>
<schematicsection
name="DAC_AND_PWM_FILTER"
displayName="14-bit DAC, PWM Filter, and Output Selection"
/>
<DAC8311IDCKT
name="U2"
schX={-3.8}
schY={1.7}
schWidth="3.8mm"
schHeight="2.4mm"
schPinArrangement={{
leftSide: [1, 2, 3],
rightSide: [6],
topSide: [4],
bottomSide: [5],
}}
pcbX={-7.366}
pcbY={-25.654}
connections={{
pin1: ".R16 > .pin2",
pin2: ".R13 > .pin2",
pin3: ".R14 > .pin2",
pin4: N.V3V3,
pin5: N.GND,
pin6: ".J5 > .pin1",
}}
/>
<resistor
name="R16"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-6.8}
schY={3.4}
pcbX={16.129}
pcbY={-33.02}
pcbRotation={180}
connections={{ pin1: N.DAC_SYNC }}
/>
<resistor
name="R13"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-6.8}
schY={2.2}
pcbX={-15.621}
pcbY={-29.972}
connections={{ pin1: N.DAC_SCLK }}
/>
<resistor
name="R14"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-6.8}
schY={1}
pcbX={16.129}
pcbY={-22.86}
pcbRotation={180}
connections={{ pin1: N.DAC_MOSI }}
/>
<capacitor
name="C4"
capacitance="10uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="C1608X5R1A106M080AC"
schX={-4.7}
schY={-1.8}
schRotation={90}
pcbX={-8.2248}
pcbY={-22.7813}
pcbRotation={180}
connections={{ pin1: N.V3V3, pin2: N.GND }}
/>
<capacitor
name="C5"
capacitance="0.1uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R70J104KA01D"
schX={-2.9}
schY={-1.8}
schRotation={90}
pcbX={-8.0248}
pcbY={-21.2238}
pcbRotation={180}
connections={{ pin1: N.V3V3, pin2: N.GND }}
/>
<A_67996_406HLF
name="J5"
displayName="J5 DAC / PWM / LaunchPad Select"
schX={3.2}
schY={1.6}
schWidth="3.2mm"
schHeight="2.2mm"
schPinArrangement={{ leftSide: [1, 3, 5], rightSide: [2, 4, 6] }}
pcbX={2.159}
pcbY={-22.606}
pcbRotation={270}
connections={{
pin2: ".R12 > .pin1",
pin3: N.LP_DAC_OUT,
pin4: ".R12 > .pin1",
pin5: ".R19 > .pin2",
pin6: N.AUDIO_OUT,
}}
/>
<resistor
name="R19"
resistance="130ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07130RL"
schX={-0.2}
schY={1.4}
pcbX={11.43}
pcbY={-21.844}
pcbRotation={270}
connections={{ pin1: N.PWM_AUDIO }}
/>
<capacitor
name="C6"
capacitance="0.33uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="C0603C334K8RACTU"
schX={0.2}
schY={0}
schRotation={90}
pcbX={8.382}
pcbY={-24.638}
pcbRotation={90}
connections={{ pin1: ".R19 > .pin2", pin2: N.GND }}
/>
<resistor
name="R12"
resistance="100ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07100RL"
schX={6.4}
schY={1.6}
pcbX={6.858}
pcbY={-19.939}
connections={{ pin2: N.AUDIO_OUT }}
/>
<capacitor
name="C3"
capacitance="0.082uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R71C823KA01D"
schX={7.8}
schY={0.4}
schRotation={90}
pcbX={9.398}
pcbY={-20.828}
pcbRotation={90}
connections={{ pin1: N.AUDIO_OUT, pin2: N.GND }}
/>
</group>
<group
name="AUDIO_JACK_DETECTION"
schSheetName={HEADSET_SHEET}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schTraceAutoLabelEnabled={false}
schMaxTraceDistance="1.5mm"
>
<schematicsection
name="HEADSET_JACK_AND_DETECTION"
displayName="Headset Jack, Routing Detection, and Test Points"
/>
<TS3A225ERTER
name="U1"
noSchematicRepresentation
pcbX={15.567}
pcbY={5.588}
pcbRotation={270}
connections={{
pin1: N.V3V3,
pin2: N.V3V3,
pin3: N.GND,
pin4: N.GND,
pin5: N.SPEAKER_DET,
pin6: ".J6 > .pin1",
pin7: ".J6 > .pin4",
pin8: ".R18 > .pin2",
pin9: N.HP_LEFT,
pin10: N.GND,
pin11: N.HEADSET_MIC,
pin12: ".R11 > .pin1",
pin13: N.V3V3,
pin14: ".J6 > .pin4",
pin15: ".J6 > .pin1",
pin16: N.V3V3,
pin17: N.GND,
}}
/>
<schematicbox
name="U1A"
title="U1A Audio Paths"
chipRef=".U1"
schX={0.8}
schY={0.5}
width="4mm"
height="2mm"
pinLabels={{
pin6: ["SLEEVE"],
pin7: ["RING2"],
pin9: ["TIP_SENSE"],
pin11: ["MICp", "MICP"],
pin12: ["MICn", "MICN"],
pin14: ["RING2_S", "RING2_SENSE"],
pin15: ["SLEEVE_S", "SLEEVE_SENSE"],
}}
schPinArrangement={{
leftSide: [11, 12],
rightSide: [15, 6, 14, 7, 9],
}}
/>
<schematicbox
name="U1B"
title="U1B Detection and Control"
chipRef=".U1"
schX={-5}
schY={0}
width="3.6mm"
height="1.8mm"
pinLabels={{
pin1: ["SCL"],
pin2: ["SDA"],
pin4: ["ADDR_SEL"],
pin5: ["DET_TRIGGER"],
pin8: ["MIC_PRESENT"],
}}
schPinArrangement={{
leftSide: [1, 2, 4],
rightSide: [8, 5],
}}
/>
<schematicbox
name="U1P"
title="U1 Power"
chipRef=".U1"
schX={-2.5}
schY={-2.5}
width="2.8mm"
height="1mm"
pinLabels={{
pin3: ["GND2"],
pin10: ["GND1"],
pin13: ["VDD2"],
pin16: ["VDD1"],
pin17: ["EP"],
}}
schPinArrangement={{
topSide: [13, 16],
bottomSide: [3, 10, 17],
}}
/>
<SJ_43516_SMT_TR
name="J6"
schX={6}
schY={0.5}
schWidth="3.4mm"
schHeight="2.4mm"
schPinArrangement={{ leftSide: [1, 2, 3], rightSide: [4, 5, 6] }}
pcbX={17.399}
pcbY={28.006}
pcbRotation={270}
connections={{
pin2: N.HP_LEFT,
pin3: N.HP_RIGHT,
pin5: ".R21 > .pin1",
}}
noConnect={["pin6"]}
/>
<resistor
name="R11"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-6}
schY={-2.6}
pcbX={20.32}
pcbY={4.064}
pcbRotation={180}
connections={{ pin2: N.GND }}
/>
<resistor
name="R17"
resistance="10kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0710KL"
schX={9.5}
schY={-0.8}
schRotation={90}
pcbX={14.986}
pcbY={1.778}
connections={{ pin1: N.HP_LEFT, pin2: N.GND }}
/>
<resistor
name="R15"
resistance="47kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0747KL"
schX={-6.8}
schY={2.7}
pcbX={8.723}
pcbY={4.191}
pcbRotation={270}
connections={{ pin1: N.V3V3, pin2: N.MIC_DET }}
/>
<resistor
name="R18"
resistance="20kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0720KL"
schX={-6.8}
schY={1.2}
pcbX={11.082}
pcbY={4.191}
pcbRotation={90}
connections={{ pin1: N.MIC_DET }}
/>
<resistor
name="R21"
resistance="10kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0710KL"
schX={9.6}
schY={0.5}
pcbX={10.668}
pcbY={11.684}
connections={{ pin2: N.SPEAKER_DET }}
/>
<resistor
name="R22"
resistance="100kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW0603100KFKEA"
schX={6.4}
schY={-2.4}
pcbX={10.668}
pcbY={9.779}
connections={{ pin1: N.V3V3, pin2: N.SPEAKER_DET }}
/>
<resistor
name="R23"
resistance="220kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07220KL"
schX={8.2}
schY={-2.4}
schRotation={90}
pcbX={14.478}
pcbY={9.779}
connections={{ pin1: N.SPEAKER_DET, pin2: N.GND }}
/>
<capacitor
name="C7"
capacitance="1uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R71C105KA12D"
schX={10}
schY={-2.4}
schRotation={90}
pcbX={14.478}
pcbY={11.684}
pcbRotation={180}
connections={{ pin1: N.SPEAKER_DET, pin2: N.GND }}
/>
<testpoint
name="TP1"
schX={-6.2}
schY={3.4}
pcbX={1.905}
pcbY={-9.525}
connections={{ pin1: N.MIC_DET }}
footprint={
<footprint>
<platedhole
portHints={["pin1"]}
pcbX="0mm"
pcbY="0mm"
outerDiameter="0.75mm"
holeDiameter="0.45mm"
shape="circle"
/>
</footprint>
}
/>
<testpoint
name="TP2"
schX={11.6}
schY={-2.4}
pcbX={-1.684}
pcbY={-4.7507}
connections={{ pin1: N.SPEAKER_DET }}
footprint={
<footprint>
<platedhole
portHints={["pin1"]}
pcbX="0mm"
pcbY="0mm"
outerDiameter="0.75mm"
holeDiameter="0.45mm"
shape="circle"
/>
</footprint>
}
/>
</group>
<group
name="MICROPHONE_AMPLIFIER"
schSheetName={MICROPHONE_SHEET}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schTraceAutoLabelEnabled={false}
schMaxTraceDistance="1.5mm"
>
<schematicsection
name="MICROPHONE_PREAMPLIFIER"
displayName="Electret Microphone Bias and TLV2760 Amplifier"
/>
<POM_2242P_C33_R
name="MIC1"
schX={7.2}
schY={-2.8}
pcbX={-3.937}
pcbY={-28.956}
pcbRotation={180}
connections={{ pin1: N.ONBOARD_MIC, pin2: N.GND }}
/>
<TLV2760IDBVTG4
name="U5"
noSchematicRepresentation
schX={3.6}
schY={0.2}
schWidth="2.7mm"
schHeight="3.2mm"
schPinArrangement={{
leftSide: [3, 4],
rightSide: [1],
topSide: [5, 6],
bottomSide: [2],
}}
pcbX={12.192}
pcbY={-5.461}
connections={{
pin1: ".R36 > .pin1",
pin2: N.GND,
pin3: ".C19 > .pin2",
pin4: ".R24 > .pin2",
pin5: N.MIC_PWR,
pin6: N.MIC_PWR,
}}
/>
<schematicsymbol
name="U5A"
displayName="U5 TLV2760"
chipRef=".U5"
symbolName="opamp_with_power"
schX={0}
schY={0}
connections={{
pin1: ".U5 > .pin3",
pin2: ".U5 > .pin4",
pin3: ".U5 > .pin2",
pin4: ".U5 > .pin1",
pin5: ".U5 > .pin6",
}}
/>
<capacitor
name="C19"
capacitance="0.15uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R61A154KA01D"
schX={-4.5}
schY={-1.8}
pcbX={7.62}
pcbY={-6.731}
connections={{ pin1: N.MIC_RAW }}
/>
<resistor
name="R38"
resistance="51kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0751KL"
schX={-1.8}
schY={-3.4}
schRotation={90}
pcbX={7.62}
pcbY={-5.207}
connections={{ pin1: ".C19 > .pin2", pin2: N.GND }}
/>
<resistor
name="R35"
resistance="47kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0747KL"
schX={-1.8}
schY={-0.4}
schRotation={90}
pcbX={7.62}
pcbY={-3.683}
pcbRotation={180}
connections={{ pin1: ".R32 > .pin2", pin2: ".C19 > .pin2" }}
/>
<resistor
name="R32"
resistance="3kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-073KL"
schX={-3}
schY={1.2}
pcbX={12.192}
pcbY={-1.143}
connections={{ pin1: N.MIC_PWR }}
/>
<capacitor
name="C22"
capacitance="0.47uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R60J474KA01D"
schX={-3.3}
schY={-3.4}
schRotation={90}
pcbX={6.096}
pcbY={-1.143}
connections={{ pin1: ".R32 > .pin2", pin2: N.GND }}
/>
<resistor
name="R34"
resistance="8.2kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-078K2L"
schX={-6.2}
schY={-1.8}
pcbX={2.286}
pcbY={-14.224}
connections={{ pin1: N.MIC_RAW, pin2: ".R30 > .pin1" }}
/>
<resistor
name="R30"
resistance="470ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07470RL"
schX={-4.6}
schY={1.2}
pcbX={9.652}
pcbY={-13.843}
pcbRotation={180}
connections={{ pin2: N.MIC_PWR }}
/>
<capacitor
name="C13"
capacitance="4.7uF"
manufacturerPartNumber="TPSA475K010R1400"
schX={-4.6}
schY={-3.4}
schRotation={90}
pcbX={5.588}
pcbY={-15.367}
pcbRotation={270}
connections={{ pin1: ".R30 > .pin1", pin2: N.GND }}
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="-1.3mm"
pcbY="0mm"
width="1.25mm"
height="1.8mm"
shape="rect"
/>
<smtpad
portHints={["pin2"]}
pcbX="1.3mm"
pcbY="0mm"
width="1.25mm"
height="1.8mm"
shape="rect"
/>
</footprint>
}
/>
<capacitor
name="C14"
capacitance="4.7uF"
manufacturerPartNumber="TPSA475K010R1400"
schX={0.8}
schY={-3.4}
schRotation={90}
pcbX={16.383}
pcbY={-2.667}
pcbRotation={90}
connections={{ pin1: N.MIC_PWR, pin2: N.GND }}
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="-1.3mm"
pcbY="0mm"
width="1.25mm"
height="1.8mm"
shape="rect"
/>
<smtpad
portHints={["pin2"]}
pcbX="1.3mm"
pcbY="0mm"
width="1.25mm"
height="1.8mm"
shape="rect"
/>
</footprint>
}
/>
<capacitor
name="C15"
capacitance="0.1uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R70J104KA01D"
schX={2.3}
schY={-3.4}
schRotation={90}
pcbX={18.669}
pcbY={-2.667}
pcbRotation={90}
connections={{ pin1: N.MIC_PWR, pin2: N.GND }}
/>
<capacitor
name="C8"
capacitance="0.47uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R60J474KA01D"
schX={-0.4}
schY={4.3}
pcbX={8.509}
pcbY={-12.065}
connections={{ pin1: N.GND, pin2: ".R24 > .pin1" }}
/>
<resistor
name="R24"
resistance="820ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07820RL"
schX={1.4}
schY={4.3}
pcbX={12.446}
pcbY={-12.065}
pcbRotation={180}
/>
<resistor
name="R26"
resistance="200kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07200KL"
schX={3.6}
schY={1.8}
pcbX={12.446}
pcbY={-9.017}
pcbRotation={180}
connections={{
pin1: ".R24 > .pin2",
pin2: ".R36 > .pin1",
}}
/>
<capacitor
name="C9"
capacitance="51pF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM1885C2A510JA01D"
schX={3.6}
schY={3.2}
pcbX={12.446}
pcbY={-10.541}
pcbRotation={180}
connections={{
pin1: ".R24 > .pin2",
pin2: ".R36 > .pin1",
}}
/>
<resistor
name="R36"
resistance="820ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07820RL"
schX={4.4}
schY={0}
pcbX={8.509}
pcbY={-9.017}
pcbRotation={180}
connections={{ pin2: N.MIC_OUT }}
/>
<capacitor
name="C20"
capacitance="0.015uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="C0603C153K1RACTU"
schX={5.2}
schY={-1.4}
schRotation={90}
pcbX={8.509}
pcbY={-10.541}
connections={{ pin1: N.MIC_OUT, pin2: N.GND }}
/>
</group>
<group
name="ANALOG_AUDIO_SWITCH"
schSheetName={SWITCH_SHEET}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schTraceAutoLabelEnabled={false}
schMaxTraceDistance="1.5mm"
>
<schematicsection
name="AUDIO_PATH_SWITCH"
displayName="Analog Switch for Headset, Microphone, and Loudspeaker Paths"
/>
<TS3A44159PWR
name="U3"
noSchematicRepresentation
pcbX={-5.334}
pcbY={-13.208}
connections={{
pin1: N.HEADPHONE_OUT,
pin2: N.AMP_AUDIO_OUT_P,
pin3: N.LOUDSPEAKER_OUT_P,
pin4: N.GND,
pin5: ".R20 > .pin1",
pin6: ".R2 > .pin1",
pin7: ".R7 > .pin1",
pin8: N.MIC_DET,
pin9: N.ONBOARD_MIC,
pin10: N.MIC_RAW,
pin11: N.HEADSET_MIC,
pin12: N.V3V3,
pin13: ".C21 > .pin1",
pin14: N.AMP_AUDIO_OUT_N,
pin15: N.LOUDSPEAKER_OUT_N,
pin16: N.SPEAKER_DET,
}}
/>
<schematicbox
name="U3A"
title="U3A Speaker / Headphone −"
chipRef=".U3"
schX={-3.6}
schY={2}
width="3.8mm"
height="1.3mm"
pinLabels={{
pin13: ["NO1"],
pin14: ["COM1"],
pin15: ["NC1"],
pin16: ["IN1_2"],
}}
schPinArrangement={{ leftSide: [14, 15, 16], rightSide: [13] }}
/>
<schematicbox
name="U3B"
title="U3B Speaker / Headphone +"
chipRef=".U3"
schX={3.6}
schY={2}
width="3.8mm"
height="1.2mm"
pinLabels={{ pin1: ["NO2"], pin2: ["COM2"], pin3: ["NC2"] }}
schPinArrangement={{ leftSide: [2, 3], rightSide: [1] }}
/>
<schematicbox
name="U3C"
title="U3C Detection Termination"
chipRef=".U3"
schX={-3.6}
schY={-2}
width="3.8mm"
height="1.3mm"
pinLabels={{
pin5: ["NO3"],
pin6: ["COM3"],
pin7: ["NC3"],
pin8: ["IN3_4"],
}}
schPinArrangement={{ leftSide: [5, 6, 7], rightSide: [8] }}
/>
<schematicbox
name="U3D"
title="U3D Microphone Source"
chipRef=".U3"
schX={3.6}
schY={-2}
width="3.8mm"
height="1.2mm"
pinLabels={{ pin9: ["NO4"], pin10: ["COM4"], pin11: ["NC4"] }}
schPinArrangement={{ leftSide: [10, 11], rightSide: [9] }}
/>
<schematicbox
name="U3P"
title="U3 Power"
chipRef=".U3"
schX={0}
schY={0}
width="2.4mm"
height="1mm"
pinLabels={{ pin4: ["GND"], pin12: ["VCC"] }}
schPinArrangement={{ topSide: [12], bottomSide: [4] }}
/>
<resistor
name="R7"
resistance="50ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW060350R0FKEA"
schX={-7.2}
schY={2.5}
pcbX={-11.176}
pcbY={-13.716}
pcbRotation={180}
connections={{ pin2: N.GND }}
/>
<resistor
name="R2"
resistance="50ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW060350R0FKEA"
schX={-7.2}
schY={0.9}
pcbX={-11.176}
pcbY={-15.24}
pcbRotation={180}
connections={{ pin2: N.GND }}
/>
<resistor
name="R20"
resistance="50ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW060350R0FKEA"
schX={-7.2}
schY={-0.7}
pcbX={-11.176}
pcbY={-16.764}
pcbRotation={180}
connections={{ pin2: N.GND }}
/>
<capacitor
name="C2"
capacitance="10uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="C1608X5R1A106M080AC"
schX={7.2}
schY={2.5}
schRotation={90}
pcbX={1.397}
pcbY={3.81}
connections={{ pin1: N.HEADPHONE_OUT, pin2: N.HP_LEFT }}
/>
<capacitor
name="C23"
capacitance="10uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="C1608X5R1A106M080AC"
schX={7.2}
schY={0.9}
schRotation={90}
pcbX={1.397}
pcbY={5.3077}
connections={{ pin1: N.HEADPHONE_OUT, pin2: N.HP_RIGHT }}
/>
<capacitor
name="C21"
capacitance="0.1uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R70J104KA01D"
schX={0}
schY={3.6}
pcbX={-0.762}
pcbY={-7.62}
pcbRotation={270}
connections={{ pin2: ".R37 > .pin1" }}
/>
<resistor
name="R37"
resistance="510ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-07510RL"
schX={2.2}
schY={3.6}
pcbX={0.762}
pcbY={-7.62}
pcbRotation={90}
connections={{ pin2: N.GND }}
/>
</group>
<group
name="LOUDSPEAKER_AMPLIFIER"
schSheetName={LOUDSPEAKER_SHEET}
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schTraceAutoLabelEnabled={false}
schMaxTraceDistance="1.5mm"
>
<schematicsection
name="LOUDSPEAKER_OUTPUT"
displayName="TPA301 Loudspeaker Amplifier, Volume, and Speaker"
/>
<TPA301DGNR
name="U4"
schX={0}
schY={0.5}
schWidth="4.4mm"
schHeight="2.8mm"
schPinArrangement={{
leftSide: [1, 2, 3, 4],
rightSide: [5, 8],
bottomSide: [7, 9, 6],
}}
pcbX={-13.462}
pcbY={-0.127}
connections={{
pin1: N.AUDIO_SHUTDOWN,
pin2: ".C12 > .pin1",
pin4: ".R29 > .pin2",
pin5: N.AMP_AUDIO_OUT_P,
pin6: N.V3V3,
pin8: N.AMP_AUDIO_OUT_N,
}}
/>
<trace
name="U4_POWERPAD_TO_GND"
from=".U4 > .pin9"
to=".C17 > .pin2"
width="0.25mm"
/>
<capacitor
name="C11"
capacitance="0.56uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R71A564KA61D"
schX={-6.2}
schY={0.2}
pcbX={-18.161}
pcbY={-7.455}
connections={{ pin1: N.AUDIO_OUT, pin2: ".R29 > .pin1" }}
/>
<resistor
name="R29"
resistance="30kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="RC0603FR-0730KL"
schX={-4.4}
schY={0.2}
pcbX={-24.384}
pcbY={9.271}
pcbRotation={90}
/>
<capacitor
name="C12"
capacitance="2.2uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R61A225KE34D"
schX={-4.2}
schY={-1.2}
schRotation={90}
pcbX={-13.208}
pcbY={4.826}
connections={{ pin2: N.GND }}
/>
<resistor
name="R33"
resistance="100kohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW0603100KFKEA"
schX={-7}
schY={-2.6}
pcbX={-10.287}
pcbY={0.762}
pcbRotation={90}
connections={{ pin1: N.V3V3, pin2: N.AUDIO_SHUTDOWN }}
/>
<resistor
name="R25"
resistance="0ohm"
footprint={TI_0603_RES}
manufacturerPartNumber="CRCW06030000Z0EA"
schX={-3.8}
schY={3.2}
pcbX={-22.86}
pcbY={9.271}
pcbRotation={270}
connections={{
pin1: ".R29 > .pin2",
pin2: ".R27 > .pin1",
}}
/>
<A_3352T_1_104LF
name="R27"
displayName="R27 100k Volume"
schX={-1.6}
schY={3.2}
pcbX={-20.5}
pcbY={-3.5}
pcbRotation={180}
connections={{
pin2: ".C10 > .pin2",
pin3: N.GND,
}}
/>
<capacitor
name="C10"
capacitance="5pF"
footprint={TI_0603_CAP}
manufacturerPartNumber="CC0603CRNPO9BN5R0"
schX={-3.4}
schY={5.7}
pcbX={-21.336}
pcbY={9.271}
pcbRotation={270}
connections={{
pin1: ".R29 > .pin2",
pin2: ".R27 > .pin2",
}}
/>
<capacitor
name="C16"
capacitance="10uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="C1608X5R1A106M080AC"
schX={-0.8}
schY={-3.7}
schRotation={90}
pcbX={-9.271}
pcbY={-5.588}
pcbRotation={90}
connections={{ pin1: N.V3V3, pin2: N.GND }}
/>
<capacitor
name="C17"
capacitance="0.1uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R70J104KA01D"
schX={1}
schY={-3.7}
schRotation={90}
pcbX={-10.795}
pcbY={-5.588}
pcbRotation={90}
connections={{ pin1: N.V3V3, pin2: N.GND }}
/>
<capacitor
name="C18"
capacitance="2.2uF"
footprint={TI_0603_CAP}
manufacturerPartNumber="GRM188R61A225KE34D"
schX={2.8}
schY={-3.7}
schRotation={90}
pcbX={-12.319}
pcbY={-5.588}
pcbRotation={270}
connections={{ pin1: N.V3V3, pin2: N.GND }}
/>
<capacitor
name="C1"
capacitance="47uF"
manufacturerPartNumber="TPSB476K010R0250"
schX={5}
schY={-2.4}
pcbX={-6.858}
pcbY={-0.381}
pcbRotation={0}
connections={{
pin1: N.LOUDSPEAKER_OUT_P,
pin2: ".S1 > .pin1",
}}
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="-1.375mm"
pcbY="0mm"
width="1.95mm"
height="2.25mm"
shape="rect"
/>
<smtpad
portHints={["pin2"]}
pcbX="1.375mm"
pcbY="0mm"
width="1.95mm"
height="2.25mm"
shape="rect"
/>
</footprint>
}
/>
<FS_3013
name="S1"
displayName="S1 8 Ohm Speaker"
schX={7.5}
schY={-2.4}
pcbX={-4.25}
pcbY={22}
connections={{ pin2: N.LOUDSPEAKER_OUT_N }}
/>
</group>
<copperpour
name="GND_BOTTOM_POUR"
layer="bottom"
connectsTo={N.GND}
clearance="0.2mm"
/>
</board>
);
}
Related Packages
More from this authortscircuit/autorouting-dataset-01This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.
Similar packageabse/boostxl-sharp128This code defines a printed circuit board (PCB) with various surface-mount resistors, capacitors, inductors, and integrated circuits, including power management components and interface connectors, for a TI-based LCD and microSD module using 0603 and other package types.