tscircuit/autorouting-dataset-01
This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.
- Version
- 1.0.102
- License
- unset
- Stars
- 4
lib/circuit/circuit018.tsx
PCB
Schematic
/** ISM330DHCX IMU + MMC5983MA magnetometer breakout with I2C headers, jumpers, and LED. */
import { ISM330DHCX } from "lib/imports/ISM330DHCX"
import { MMC5983MA_QFN16 } from "lib/imports/MMC5983MA_QFN16"
import { shouldAutorouterRun } from "lib/shouldAutorouterRun"
import { sel } from "tscircuit"
export const D1_FOOTPRINT = (
<footprint>
{/* Cathode pad (C) */}
<smtpad
pcbX="0.877mm"
pcbY="0mm"
width="1mm"
height="1mm"
shape="pill"
radius="0.15mm"
layer="top"
portHints={["C", "K", "cathode"]}
/>
{/* Anode pad (A) */}
<smtpad
pcbX="-0.877mm"
pcbY="0mm"
width="1mm"
height="1mm"
shape="pill"
radius="0.15mm"
layer="top"
portHints={["A", "anode"]}
/>
</footprint>
)
export const J_FOOTPRINT = (
<footprint>
{/* --- Mechanical support pads (NC1/NC2) --- */}
<smtpad
pcbX="-2.8mm"
pcbY="-3.675mm"
width="1.2mm"
height="2mm"
layer="top"
shape="rect"
portHints={["NC2"]}
/>
<smtpad
pcbX="2.8mm"
pcbY="-3.675mm"
width="1.2mm"
height="2mm"
layer="top"
shape="rect"
portHints={["NC1"]}
/>
{/* --- Signal pins, 1 mm pitch --- */}
<smtpad
pcbX="-1.5mm"
pcbY="0mm"
width="0.6mm"
height="1.35mm"
layer="top"
shape="rect"
portHints={["1"]}
/>
<smtpad
pcbX="-0.5mm"
pcbY="0mm"
width="0.6mm"
height="1.35mm"
shape="rect"
layer="top"
portHints={["2"]}
/>
<smtpad
pcbX="0.5mm"
pcbY="0mm"
width="0.6mm"
height="1.35mm"
layer="top"
shape="rect"
portHints={["3"]}
/>
<smtpad
pcbX="1.5mm"
pcbY="0mm"
shape="rect"
width="0.6mm"
height="1.35mm"
layer="top"
portHints={["4"]}
/>
</footprint>
)
export default () => (
<board
routingDisabled={!shouldAutorouterRun()}
width="25.4mm"
height="25.4mm"
>
<schematictext
text="Accelerometer - ISM330DHCX"
fontSize={0.4}
color="brown"
schY={4}
/>
<group>
<subcircuit name="ISM330DHCX">
<group pcbFlex pcbFlexDirection="column" pcbFlexGap={0.3} pcbY={-0.3}>
<ISM330DHCX
name="U1"
pcbRotation={180}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: [1, 2, 3, 4],
},
rightSide: {
direction: "bottom-to-top",
pins: [5, 6, 7, 8, 9, 10, 11, 12, 13, 14],
},
}}
schWidth={1.8}
schPinStyle={{
pin1: {
bottomMargin: "0.2",
},
pin2: {
bottomMargin: "1",
},
}}
connections={{
pin1: sel.C3.pin2,
pin2: sel.C4.pin2,
pin3: sel.net.GND,
pin4: sel.net.GND,
pin5: sel.net().ISM_INT2,
pin6: sel.net().ISM_INT1,
pin9: sel.net().SCX,
pin10: sel.net().SDX,
pin11: sel.net().POCI_SAO,
pin12: sel.net().SCL_SCK,
pin13: sel.net().SDA_PICO,
pin14: sel.net().ISM_CS_N,
}}
/>
<capacitor
name="C4"
capacitance="0.1uf"
footprint="0603"
schRotation={90}
pcbRotation={180}
connections={{
pin1: sel.net.GND,
pin2: sel.net.V3_3,
}}
/>
</group>
<group
pcbFlex
pcbFlexDirection="row"
pcbFlexGap={0.2}
pcbX={-4}
pcbY={-1}
>
<resistor
footprint="0603"
name="R3"
pcbRotation={90}
resistance="100k"
schRotation={90}
connections={{
pin1: sel.U1.pin14,
pin2: sel.net.V3_3,
}}
/>
<capacitor
name="C3"
capacitance="0.1uf"
footprint="0603"
schRotation={90}
pcbRotation={270}
connections={{
pin1: sel.net.GND,
pin2: sel.net.V3_3,
}}
/>
</group>
</subcircuit>
</group>
<schematictext
text="Accelerometer Address Selection and"
fontSize={0.4}
color="brown"
schY={4}
schX={8}
/>
<schematictext
text="Sensor Hub Jumpers"
fontSize={0.4}
color="brown"
schY={3.5}
schX={8}
/>
<group pcbPack pcbPackGap="0.6mm" pcbX={4} pcbY={4}>
<subcircuit name="ISM330DHCX_jumpers" schX={8}>
<solderjumper
name="SJ1"
layer="bottom"
pinCount={3}
footprint="solderjumper3_bridged12_pw0.6604_ph1.27_p1.0414"
bridgedPins={[["1", "2"]]}
schRotation={-90}
connections={{
pin2: sel.net().POCI_SAO,
}}
/>
<resistor
footprint="0603"
name="R5"
resistance="100k"
schRotation={90}
connections={{
pin2: sel.net.V3_3,
pin1: ".SJ1 > .pin1",
}}
/>
<resistor
footprint="0603"
name="R6"
pcbRotation={180}
resistance="100k"
schRotation={90}
connections={{
pin2: ".SJ1 > .pin3",
pin1: sel.net.GND,
}}
/>
<subcircuit>
<solderjumper
name="SDX_JMP"
layer="bottom"
pinCount={2}
footprint="solderjumper2_bridged12_pw0.6604_ph1.27_p1.0414"
bridgedPins={[["1", "2"]]}
schRotation={-90}
connections={{
pin1: sel.net().SDX,
pin2: sel.net().GND,
}}
/>
<solderjumper
name="SCX_JMP"
layer="bottom"
pinCount={2}
footprint="solderjumper2_bridged12_pw0.6604_ph1.27_p1.0414"
bridgedPins={[["1", "2"]]}
schRotation={-90}
connections={{
pin1: sel.net().SCX,
pin2: sel.net().GND,
}}
/>
</subcircuit>
</subcircuit>
</group>
<schematictext
text="Magnetometer - MMC5983MA"
fontSize={0.4}
color="brown"
schY={4}
schX={17}
/>
<group>
<subcircuit name="MMC5983MA_section" schX={17}>
<group pcbFlex pcbFlexDirection="column" pcbGap={0.3} pcbY={6}>
<MMC5983MA_QFN16
name="U2"
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: [13, 2, 10, 3, 6, 9, 2],
},
rightSide: {
direction: "bottom-to-top",
pins: [15, 4, 5, 1, 16],
},
}}
schWidth={1.6}
schPinStyle={{
pin15: {
bottomMargin: "0.4",
},
}}
connections={{
pin2: sel.C1.pin2,
pin13: sel.C1.pin2,
pin15: sel.net().MAG_INT,
pin4: sel.net().MAG_CS_N,
pin5: sel.net().POCI_SAO,
pin1: sel.net().SCL_SCK,
pin16: sel.net().SDA_PICO,
pin9: sel.net().GND,
}}
/>
<resistor
footprint="0603"
name="R7"
pcbRotation={270}
schRotation={90}
resistance="100k"
connections={{
pin1: sel.U2.pin4,
pin2: sel.net.V3_3,
}}
/>
</group>
<group pcbY={1.5}>
<capacitor
name="C2"
capacitance="10uf"
footprint="0603"
pcbX={-1}
schRotation={90}
pcbRotation={180}
connections={{
pin1: sel.net.GND,
pin2: sel.U2.pin10,
}}
/>
<capacitor
name="C1"
capacitance="10uf"
footprint="0603"
pcbX={1}
pcbY={-0.3}
pcbRotation={270}
schRotation={90}
connections={{
pin1: sel.net.GND,
pin2: sel.net.V3_3,
}}
/>
</group>
</subcircuit>
</group>
<schematictext text="Connectors" fontSize={0.4} color="brown" schY={-6} />
<group schY={-8}>
<subcircuit>
<group pcbFlex pcbFlexDirection="column" pcbFlexGap={21}>
<pinheader
name="JP1"
pcbRotation={180}
gender="female"
footprint="pinrow6_p2.54_id1.016_od1.8796_doublesidedpinlabel_pinlabelorthogonal_pinlabeltextalignright_pinlabelverticallyinverted_nosquareplating"
pinCount={6}
schPinArrangement={{
rightSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin2", "pin3", "pin4", "pin5", "pin6"],
},
}}
connections={{
pin1: sel.net().POCI_SAO,
pin2: sel.net().ISM_CS,
pin3: sel.net().SCL_SCK,
pin4: sel.net().SDA_PICO,
pin5: sel.net.V3_3,
pin6: sel.net.GND,
}}
/>
<pinheader
name="JP3"
gender="female"
footprint="pinrow6_p2.54_id1.016_od1.8796_doublesidedpinlabel_pinlabelorthogonal_pinlabeltextalignright_pinlabelverticallyinverted_nosquareplating"
pinCount={6}
schPinArrangement={{
rightSide: {
direction: "top-to-bottom",
pins: ["pin1", "pin2", "pin3", "pin4", "pin5", "pin6"],
},
}}
connections={{
pin1: sel.net().ISM_INT1,
pin2: sel.net().ISM_INT2,
pin3: sel.net().MAG_INT,
pin4: sel.net().MAG_CS,
pin5: sel.net().SDX,
pin6: sel.net().SCX,
}}
/>
</group>
<group pcbFlex pcbFlexGap={14} pcbAlignItems="center" pcbY={0}>
<pinheader
name="J2"
gender="female"
pinLabels={["GND", "VCC", "SDA", "SCL"]}
pcbRotation={270}
footprint={J_FOOTPRINT}
pinCount={4}
schWidth={0.6}
schPinArrangement={{
rightSide: {
direction: "bottom-to-top",
pins: ["pin1", "pin2", "pin3", "pin4"],
},
}}
connections={{
pin1: sel.J1.pin1,
pin2: sel.J1.pin2,
pin3: sel.net().SDA_PICO,
pin4: sel.net().SCL_SCK,
}}
/>
<pinheader
name="J1"
gender="female"
pcbRotation={90}
schWidth={0.6}
pinLabels={["GND", "VCC", "SDA", "SCL"]}
facingDirection="right"
footprint={J_FOOTPRINT}
pinCount={4}
schPinArrangement={{
rightSide: {
direction: "bottom-to-top",
pins: ["pin1", "pin2", "pin3", "pin4"],
},
}}
connections={{
pin1: sel.net.GND,
pin2: sel.net.V3_3,
pin3: sel.net().SDA_PICO,
pin4: sel.net().SCL_SCK,
}}
/>
</group>
</subcircuit>
</group>
<schematictext
text="I2C and LED Jumpers"
fontSize={0.4}
color="brown"
schY={-6}
schX={9}
/>
<group schY={-10} schX={9}>
<subcircuit>
<led
name="D1"
schRotation={-90}
pcbRotation={90}
footprint={D1_FOOTPRINT}
/>
<resistor
footprint="0603"
name="R4"
pcbRotation={90}
resistance="1k"
schRotation={90}
connections={{
pin1: sel.D1.pin1,
pin2: sel.net.V3_3,
}}
/>
<solderjumper
name="LED"
pinCount={2}
layer="bottom"
footprint="solderjumper2_bridged12_pw0.6604_ph1.27_p1.0414"
bridgedPins={[["1", "2"]]}
schRotation={90}
connections={{
pin1: sel.net.GND,
pin2: sel.D1.pin2,
}}
/>
<solderjumper
name="I2C_PU"
layer="bottom"
pinCount={3}
footprint="solderjumper3_bridged123_pw0.6604_ph1.27_p1.0414"
bridgedPins={[
["1", "2"],
["2", "3"],
]}
schRotation={180}
connections={{
pin2: sel.net.V3_3,
}}
/>
<group
pcbFlex
pcbFlexDirection="column"
pcbFlexGap="0.6mm"
pcbY={-5}
pcbX={0}
>
<resistor
footprint="0603"
name="R1"
resistance="2.2k"
schRotation={90}
connections={{
pin1: sel.net().SCL_SCK,
pin2: ".I2C_PU > .pin3",
}}
/>
<resistor
footprint="0603"
name="R2"
pcbRotation={180}
resistance="2.2k"
schRotation={90}
connections={{
pin1: sel.net().SDA_PICO,
pin2: ".I2C_PU > .pin1",
}}
/>
</group>
</subcircuit>
</group>
<hole diameter="3.32mm" pcbX={-10.16} pcbY={10.16} />
<hole diameter="3.32mm" pcbX={-10.16} pcbY={-10.16} />
<hole diameter="3.32mm" pcbX={10.16} pcbY={-10.16} />
<hole diameter="3.32mm" pcbX={10.16} pcbY={10.16} />
</board>
)
Related Packages
More from this authortscircuit/dataset-srj12-bus-routingThe code defines electronic circuit diagrams featuring PCB layouts with USB-C, HDMI, and general-purpose chips, connecting their pins with traces, component footprints, and annotations for hardware design.
Similar package0hmX/esp32-s3-usb-webcam-ov2640This code defines and integrates a variety of surface-mount, through-hole, and connector hardware components (including microcontrollers, regulators, resistors, capacitors, and connectors) into a PCB design framework, enabling schematic symbol creation, footprint definition, and automated routing within an electronic circuit layout.
Discover something newastra-abse/t113-s3Allwinner T113-S3 fanout from JLCPCB C5197687: 128 verified escapes, LCD top, storage right; reusable T113S3Module with clean DRC and shorts checks.