tscircuit/autorouting-dataset-01

This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.

Version: 1.0.102
License: unset
Stars: 4

lib/circuit/circuit013.tsx

PCB

Schematic

import { shouldAutorouterRun } from "lib/shouldAutorouterRun"
import { sel } from "tscircuit"

/**
 * Dual LED indicator board with external control pins.
 *
 * What the board does:
 * - Provides two LEDs with series resistors tied to VCC.
 * - Exposes the LED cathodes for sinking current externally.
 * - Breaks out VCC/GND and two LED control pins on a 1x4 header.
 */
export default () => (
  <board routingDisabled={!shouldAutorouterRun()} width="20mm" height="18mm">
    <pinheader
      name="J1"
      pinCount={4}
      pitch="2.54mm"
      pcbX={-6}
      pcbY={0}
      pcbRotation={90}
      connections={{
        pin1: sel.net().VCC,
        pin2: sel.net.GND,
        pin3: sel.net().LED1_CTRL,
        pin4: sel.net().LED2_CTRL,
      }}
    />

    <resistor
      name="R1"
      resistance="1k"
      footprint="0603"
      pcbX={3}
      pcbY={4}
      connections={{
        pin1: sel.net().VCC,
        pin2: sel.net().LED1_CTRL,
      }}
    />

    <led
      name="D1"
      color="red"
      footprint="0603"
      pcbX={8}
      pcbY={4}
      connections={{
        pin1: sel.net().LED1_CTRL,
        pin2: sel.net.GND,
      }}
    />

    <resistor
      name="R2"
      resistance="1k"
      footprint="0603"
      pcbX={3}
      pcbY={-4}
      connections={{
        pin1: sel.net().VCC,
        pin2: sel.net().LED2_CTRL,
      }}
    />

    <led
      name="D2"
      color="green"
      footprint="0603"
      pcbX={8}
      pcbY={-4}
      connections={{
        pin1: sel.net().LED2_CTRL,
        pin2: sel.net.GND,
      }}
    />
  </board>
)

lib/circuit/circuit013.tsx

Related Packages