techmannih/nema34-mounted-stepper-controller
A 48 V USB‑C PD 3.1 EPR NEMA‑34 stepper controller PCB combining STM32/TMC5160 control, external MOSFET motor bridges, protected power and regenerative braking, USB data, telemetry, diagnostics, status LEDs, and buzzer alarms.
- Version
- 0.3.92
- License
- unset
- Stars
- 1
Files in (root)/engineering/power-eco-simulation
- commissioning_corner_open.cir
- five_joules_20ms_stress.cir
- input_new_1x_corner_10a.cir
- input_new_1x_corner.cir
- input_new_1x_nominal_10a.cir
- input_old_2x_reference.cir
- restricted_open_with_rotor.cir
- restricted_supply_loss_open.cir
- results.json
- rotor_1000rpm_brake.cir
- rotor_1000rpm_open.cir
- winding_corner_brake.cir
- winding_corner_open.cir
- winding_corner_recovery_100us.cir
- winding_nominal_brake.cir
Related Packages
More from this authortechmannih/schematic-testA PCB with a 6-pin SPI display connector linked to SPI signals, ground, and 3.3V power.
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-m5stack-stickc-plus2-replacementA 4-layer ESP32-S3 carrier board with USB-C 5V input, AMS1117 3.3V regulation, buttons, status LED, decoupling passives, and a 24-pin FFC interface for display, touch, audio, or sensor peripherals.