shibosoftwaredev/f1c100s-linux-nema8-stepper-controller

Restores component part numbers and CAD models, removes test-point 3D bodies, and validates that solder paste exists only on top-side SMT pads without altering copper or DRC.

Version
0.3.5
License
unset
Stars
0

reports/fabrication-audit.json

{
  "circuitJsonSha256": "6b31f1245661186afcc3f9c6d34bc2115444bd04abf0640b30729b6960a1b6ac",
  "gerbersSha256": "f669f65f5266189bd4878f386ea1dc4ffe2e0b928062460e2936082f098ff68d",
  "drcErrors": 0,
  "assemblyComponents": 151,
  "assemblyTopCount": 151,
  "assemblyBottomComponents": [],
  "excludedBareTestFeatures": [
    "AVCC",
    "GND",
    "PE10",
    "PE2",
    "PE3",
    "PE5",
    "PE6",
    "PE7",
    "PE8",
    "PE9",
    "RESET",
    "SPI0_CLK",
    "SPI0_CS",
    "SPI0_MISO",
    "SPI0_MOSI",
    "TP_MOTION_GND",
    "TP_MOTION_NRST",
    "TP_MOTION_SWCLK",
    "TP_MOTION_SWDIO",
    "UART0_RX",
    "UART0_TX",
    "USB_DM",
    "USB_DP",
    "VCC_DRAM",
    "VCC_HP",
    "VCC_IO",
    "VCC_TV",
    "VCC_USB",
    "VDD_CORE"
  ],
  "pcbVias": 367,
  "viaHoleDiameterMm": 0.3,
  "viaPadDiameterMm": 0.45,
  "jlcpcbUniqueParts": 67,
  "jlcpcbStockIssues": 0,
  "generatedFiles": [
    "B_Cu.gbr",
    "B_Mask.gbr",
    "B_Paste.gbr",
    "B_SilkScreen.gbr",
    "Edge_Cuts.gbr",
    "F_Cu.gbr",
    "F_Fab.gbr",
    "F_Mask.gbr",
    "F_Paste.gbr",
    "F_SilkScreen.gbr",
    "In1_Cu.gbr",
    "In2_Cu.gbr",
    "drill-L1-L2.drl",
    "drill-L1-L3.drl",
    "drill-L1-L4.drl",
    "drill_npth.drl"
  ],
  "assemblyNote": "Review polarity and rotation in the JLCPCB placement preview before payment; this is required for every PCBA order."
}