shibosoftwaredev/f1c100s-linux-nema8-stepper-controller

Restores component part numbers and CAD models, removes test-point 3D bodies, and validates that solder paste exists only on top-side SMT pads without altering copper or DRC.

Version
0.3.5
License
unset
Stars
0

imports/TPS54302DDCR.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["GND"],
  pin2: ["SW"],
  pin3: ["VIN"],
  pin4: ["FB"],
  pin5: ["EN"],
  pin6: ["BOOT"]
} as const

const pinAttributes = {
  pin1: {requiresGround: true},
  pin3: {requiresPower: true}
} as const

export const TPS54302DDCR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C311983"
  ]
}}
      manufacturerPartNumber="TPS54302DDCR"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-0.94996mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.94996mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.94996mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="-0.94996mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<silkscreenpath route={[{"x":1.5391891999998961,"y":-0.8892031999998835},{"x":1.5391891999998961,"y":0.8892031999999972}]} />
<silkscreenpath route={[{"x":-1.5391892000000098,"y":-0.8892031999998835},{"x":-1.5391892000000098,"y":0.8892031999999972}]} />
<silkscreencircle pcbX="-1.668272mm" pcbY="-1.301496mm" radius="0.150114mm" />
<silkscreentext text="{NAME}" pcbX="-0.1524mm" pcbY="2.6764mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.078800000000001,"y":1.9264000000000578},{"x":1.7739999999998872,"y":1.9264000000000578},{"x":1.7739999999998872,"y":-2.0279999999999063},{"x":-2.078800000000001,"y":-2.0279999999999063},{"x":-2.078800000000001,"y":1.9264000000000578}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C311983.obj?uuid=229b69761e2c45dba6a83d8866dec72d",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C311983.step?uuid=229b69761e2c45dba6a83d8866dec72d",
        pcbRotationOffset: 90,
        modelOriginPosition: { x: -0.000012700000070253736, y: 0.000012700000070253736, z: -0.048939 },
      }}
      {...props}
    />
  )
}