shibosoftwaredev/f1c100s-linux-nema8-stepper-controller

Restores component part numbers and CAD models, removes test-point 3D bodies, and validates that solder paste exists only on top-side SMT pads without altering copper or DRC.

Version
0.3.5
License
unset
Stars
0

imports/HoLRT1206_1W_300mR_1_.tsx

import type { ResistorProps } from "@tscircuit/props"

export const HoLRT1206_1W_300mR_1_ = (props: Omit<ResistorProps, "resistance">) => {
  const { name = "R1", ...restProps } = props

  return (
    <resistor
      name={name}
      resistance="300mohm"
      supplierPartNumbers={{
  "jlcpcb": [
    "C5127777"
  ]
}}
      manufacturerPartNumber="HoLRT1206-1W-300mR-1%"
      footprint={<footprint>
        <smtpad portHints={["pin2"]} pcbX="1.478788mm" pcbY="0mm" width="1.207516mm" height="1.7010126mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-1.478788mm" pcbY="0mm" width="1.207516mm" height="1.7010126mm" shape="rect" />
<silkscreenpath route={[{"x":0.9512045999999827,"y":-1.0790935999999647},{"x":2.311120599999981,"y":-1.0790935999999647},{"x":2.311120599999981,"y":1.0790936000000784},{"x":0.9512045999999827,"y":1.0790936000000784}]} />
<silkscreenpath route={[{"x":-0.9512046000000964,"y":-1.0790935999999647},{"x":-2.311120600000095,"y":-1.0790935999999647},{"x":-2.311120600000095,"y":1.0790936000000784},{"x":-0.9512046000000964,"y":1.0790936000000784}]} />
<silkscreentext text="{NAME}" pcbX="0mm" pcbY="2.0668mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.5614000000000487,"y":1.3167999999999438},{"x":2.561399999999935,"y":1.3167999999999438},{"x":2.561399999999935,"y":-1.3421999999999343},{"x":-2.5614000000000487,"y":-1.3421999999999343},{"x":-2.5614000000000487,"y":1.3167999999999438}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C5127777.obj?uuid=da5f078ee43c429f91838a456f48f0a8",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C5127777.step?uuid=da5f078ee43c429f91838a456f48f0a8",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0, z: 0 },
      }}
      {...restProps}
    />
  )
}