shibosoftwaredev/f1c100s-linux-nema8-stepper-controller
Restores component part numbers and CAD models, removes test-point 3D bodies, and validates that solder paste exists only on top-side SMT pads without altering copper or DRC.
- Version
- 0.3.5
- License
- unset
- Stars
- 0
fabrication/assembly-bom.csv
Designator,Comment,Value,Footprint,JLCPCB Part #
U1,,C1511928,C1511928,C1511928
C_OSCI,18p,18p,cap0402,C33149
C_OSCO,18p,18p,cap0402,C33149
C_D4,100n,100n,cap0402,C1525
C_D5,100n,100n,cap0402,C1525
C_D20,100n,100n,cap0402,C1525
C_D22,100n,100n,cap0402,C1525
C_D30,100n,100n,cap0402,C1525
C_D31,100n,100n,cap0402,C1525
C_D32,100n,100n,cap0402,C1525
C_D34,100n,100n,cap0402,C1525
C_D35,100n,100n,cap0402,C1525
C_D36,100n,100n,cap0402,C1525
C_D50,100n,100n,cap0402,C1525
C_D67,100n,100n,cap0402,C1525
C_D71,100n,100n,cap0402,C1525
C_D73,100n,100n,cap0402,C1525
C_D80,100n,100n,cap0402,C1525
C_B_VCC_HP,10u,10u,cap0805,C84416
C_B_VCC_IO,10u,10u,cap0805,C84416
C_B_VDD_CORE,10u,10u,cap0805,C84416
C_B_VCC_DRAM,1u,1u,cap0805,C86035
C_B_VCC_USB,10u,10u,cap0805,C84416
C_B_VCC_TV,10u,10u,cap0805,C84416
C_B_AVCC,10u,10u,cap0805,C84416
C_VRA1,1u,1u,cap0402,C52923
R_VRA1,200k,200k,res0402,C25764
C_VRA2,1u,1u,cap0402,C52923
R_VRA2,200k,200k,res0402,C25764
R_SV_H,2k,2k,res0402,C4109
R_SV_L,2k,2k,res0402,C4109
C_SV_H,100n,100n,cap0402,C1525
C_SV_L,100n,100n,cap0402,C1525
C_TV_VRN,10u,10u,cap0805,C84416
C_TV_VRP,10u,10u,cap0805,C84416
C_TV_REF,10u,10u,cap0805,C84416
R_RESET,47k,47k,res0402,C25792
C_RESET,100n,100n,cap0402,C1525
R_PU_SDMMC0_CMD,47k,47k,res0402,C25792
R_PU_SDMMC0_D0,47k,47k,res0402,C25792
R_PU_SDMMC0_D1,47k,47k,res0402,C25792
R_PU_SDMMC0_D2,47k,47k,res0402,C25792
R_PU_SDMMC0_D3,47k,47k,res0402,C25792
R_PU_SPI0_CS,10k,10k,res0402,C25744
R_PU_TWI0_SDA,4.7k,4.7k,res0402,C25900
R_PU_TWI0_SCL,4.7k,4.7k,res0402,C25900
Y1,,C1986477,C1986477,C1986477
J_USB_DATA,,C165948,C165948,C165948
U_PD,,C24833806,C24833806,C24833806
C_PD_VDD,1u,1u,cap0402,C52923
R_PD_VSET,11k,11k,res0402,C25749
R_PD_ISET,21k,21k,res0402,C25766
R_PD_DEBUG,910k,910k,res0402,C25800
R_PD_GOOD_PU,49.9k,49.9k,res0402,C25794
U_BUCK,,C311983,C311983,C311983
L_BUCK,,C602032,C602032,C602032
C_BUCK_IN,10u,10u,cap0805,C15850
C_BUCK_IN_HF,100n,100n,cap0402,C307331
C_BUCK_BOOT,100n,100n,cap0402,C307331
C_BUCK_OUT1,22u,22u,cap0805,C45783
C_BUCK_OUT2,22u,22u,cap0805,C45783
R_BUCK_TOP,100k,100k,res0402,C25741
R_BUCK_BOTTOM,13.3k,13.3k,res0402,C122547
R_BUCK_FF,51,51,res0402,C881405
C_BUCK_FF,75p,75p,cap0402,C107010
J_ETH,,C12074,C12074,C12074
U_ETH,,C32843,C32843,C32843
FB_ETH,,C19330,0603,C19330
C_ETH_BULK,4.7u,4.7u,cap0805,C1779
C_ETH_1,100n,100n,cap0402,C1525
C_ETH_2,100n,100n,cap0402,C1525
C_ETH_3,100n,100n,cap0402,C1525
C_ETH_4,100n,100n,cap0402,C1525
C_ETH_5,100n,100n,cap0402,C1525
C_ETH_6,100n,100n,cap0402,C1525
C_ETH_7,100n,100n,cap0402,C1525
R_ETH_EXRES,12.4k,12.4k,res0402,C11692
C_ETH_TOCAP,4.7u,4.7u,cap0805,C1779
C_ETH_1V2,10n,10n,cap0402,C15195
Y_ETH,,C13740,C13740,C13740
C_ETH_XI,22p,22p,cap0402,C70464
C_ETH_XO,22p,22p,cap0402,C70464
R_ETH_RST,10k,10k,res0402,C25744
R_ETH_INT,10k,10k,res0402,C25744
R_ETH_TXN,49.9,49.9,res0402,C25792
R_ETH_TXP,49.9,49.9,res0402,C25792
R_ETH_RXN,49.9,49.9,res0402,C25792
R_ETH_RXP,49.9,49.9,res0402,C25792
U_MOTION,,C724040,C724040,C724040
C_MOTION,100n,100n,cap0402,C1525
C_MOTION_BULK,4.7u,4.7u,cap0805,C1779
R_MOTION_RESET,10k,10k,res0402,C25744
R_MOTION_BOOT,100k,100k,res0402,C25741
C_MOTION_RESET,100n,100n,cap0402,C1525
Q_PD_ENABLE,,C85202,C85202,C85202
R_MOTION_ENABLE_PD,100k,100k,res0402,C25741
R_MOTOR_ENABLE_PD,100k,100k,res0402,C25741
R_ETH_SCLK,0,0,res0402,C2906877
U_3V3,,C51118,"dfn6_missing(5)_p0.95mm_w3.5mm_pw0.5mm_pl0.9mm_pin1location(rightside,bottom)",C51118
C_U_3V3_IN,4.7u,4.7u,cap0805,C408144
C_U_3V3_OUT,4.7u,4.7u,cap0805,C408144
U_2V5,,C176945,"dfn6_missing(5)_p0.95mm_w3.5mm_pw0.5mm_pl0.9mm_pin1location(rightside,bottom)",C176945
C_U_2V5_IN,4.7u,4.7u,cap0805,C408144
C_U_2V5_OUT,4.7u,4.7u,cap0805,C408144
U_1V2,,C460310,"dfn6_missing(5)_p0.95mm_w3.5mm_pw0.5mm_pl0.9mm_pin1location(rightside,bottom)",C460310
C_U_1V2_IN,4.7u,4.7u,cap0805,C408144
C_U_1V2_OUT,4.7u,4.7u,cap0805,C408144
U_2V8,,C49451976,"dfn6_missing(5)_p0.95mm_w3.5mm_pw0.5mm_pl0.9mm_pin1location(rightside,bottom)",C49451976
C_U_2V8_IN,4.7u,4.7u,cap0805,C408144
C_U_2V8_OUT,4.7u,4.7u,cap0805,C408144
U_FLASH,,C97521,C97521,C97521
C_FLASH,100n,100n,cap0603,C14663
R_WP,10k,10k,res0603,C2906982
R_HOLD,10k,10k,res0603,C2906982
R_FLASH_CS,10k,10k,res0603,C2906982
JP_BOOT,,C492401,pinrow2_p2.54,C492401
SW_RESET,,C2886898,C2886898,C2886898
U_USB_ESD,,C7519,sot23_6,C7519
C_ESD,100n,100n,cap0603,C14663
F_VM,,C960026,1812,C960026
D_VM_BLOCK,,C478000,C478000,C478000
D_VM_TVS,,C1975329,smb,C1975329
C_VM_BULK,22u,22u,C5981428,C5981428
C_VM_CER,10u,10u,cap1206,C13585
U_MOTOR,,C81582,C81582,C81582
C_CP,10n,10n,cap0402,C15195
C_VCP,100n,100n,cap0402,C960916
R_VCP,1M,1M,res0402,C26083
C_VMA,100n,100n,cap0402,C960916
C_VMB,100n,100n,cap0402,C960916
C_DRV_3V3,470n,470n,cap0402,C480644
R_REF_TOP,5.6k,5.6k,res0402,C25908
R_REF_BOTTOM,2k,2k,res0402,C4109
C_REF,100n,100n,cap0402,C1525
R_ENABLE_PD,100k,100k,res0402,C25741
R_FAULT_PU,10k,10k,res0402,C25744
R_ISEN_A,300m,300m,C5127777,C5127777
R_ISEN_B,300m,300m,C5127777,C5127777
J_MOTOR,,C131334,C131334,C131334
U_TEMP,,C99269,C99269,C99269
C_TEMP,100n,100n,cap0402,C1525
R_TEMP_ALERT,10k,10k,res0402,C25744
J_USB_PWR,,C165948,C165948,C165948
R_USB_DATA_CC1,5.1k,5.1k,res0402,C25905
R_USB_DATA_CC2,5.1k,5.1k,res0402,C25905
Q_VBUS,,C3011194,C3011194,C3011194
C_ETH_RXN_AC,6.8n,6.8n,cap0402,C1590
C_ETH_RXP_AC,6.8n,6.8n,cap0402,C1590
R_ETH_TCT,10,10,res0402,C25077
C_ETH_TCT,22n,22n,cap0402,C1532
C_ETH_RCT,10n,10n,cap0402,C15195
Related Packages
More from this authorShiboSoftwareDev/am625sip-linux-boardThis code defines the physical footprint and pin layout for an AM625 System-in-Package (SIP) component, detailing pad positions, pin labels, and package outline for hardware integration.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newtscircuit/standard-jst-programmer26 × 42 mm USB-C RP2040 programmer with JST and TC2030 IDC SWD, NRST, selectable sensed 5 V / 3.3 V power, RGB status, and importable JST SH/Tag-Connect targets. Top-side assembly.