seveibar/pedometer
This hardware setup integrates a Type-C connector, battery, display, and RF antenna connected through a microcontroller, USB interface, charging and fuel gauge ICs, along with associated passive components, enabling power management, data communication, and signal processing.
- Version
- 0.4.4
- License
- unset
- Stars
- 1
netlist.txt
COMPONENTS:
- J1_USB_C: TYPE-C 6PIN
- J2_BATTERY: BM03B-SRSS-TB(LF)(SN)
- J3_DISPLAY: BM07B-SRSS-TB(LF)(SN)
- R1_CC1: 5.1kΩ res0402 resistor
- R2_CC2: 5.1kΩ res0402 resistor
- D1_VBUS_TVS: ESD5Z5.0T1G
- C1_VBUS: 4.7uF cap0603 capacitor
- U2_CHARGER: BQ25150YFPR
- C2_PMID: 10uF cap0603 capacitor
- C3_VINLS: 4.7uF cap0603 capacitor
- SW1_WAKE: SW1_WAKE, source_component
- C4_VSYS_SENSE: 1uF cap0402 capacitor
- C5_CHG_VDD: 4.7uF cap0603 capacitor
- C6_SYS_VDD: 4.7uF cap0603 capacitor
- R3_IMAX: 10kΩ res0402 resistor
- R4_TS_BIAS: 10kΩ res0402 resistor
- R5_TS_NO_NTC: 10kΩ resistor
- R7_LP_BOOT_PD: 100kΩ res0402 resistor
- R8_PG_PU: 100kΩ res0402 resistor
- U3_GAUGE: BQ27427YZFR
- R10_GAUGE_INT_PU: 10kΩ resistor
- R12_I2C_SCL: 10kΩ res0402 resistor
- C7_GAUGE_BAT: 1uF cap0402 capacitor
- C8_GAUGE_VDD: 2.2uF cap0402 capacitor
- R9_BIN_PD: 10kΩ res0402 resistor
- U1_MCU: CC2340R52E0RGER
- J4_SWD: BM05B-SRSS-TB(LF)(SN)
- Q1_DISPLAY_SWITCH: AO3401A
- Y1_48MHZ: ABM11W-48.0000MHZ-7-B1U-T3
- L1_DCDC: L1_DCDC, source_component
- C9_VDDR_10U: 10uF cap0603 capacitor
- C10_VDDR_1U: 1uF cap0402 capacitor
- C11_VDDR_100N: 100nF cap0402 capacitor
- C12_VDDD: 1uF cap0402 capacitor
- C13_VDDS_1: 100nF cap0402 capacitor
- C14_VDDS_2: 100nF cap0402 capacitor
- C15_VDDS_3: 100nF cap0402 capacitor
- C16_VDDS_BULK: 10uF cap0603 capacitor
- R11_RESET_PU: 100kΩ res0402 resistor
- C17_RESET: 100nF cap0402 capacitor
- U4_ACCEL: BMA400
- C18_ACCEL_VDD: 100nF cap0402 capacitor
- C19_ACCEL_VDDIO: 100nF cap0402 capacitor
- R13_I2C_SDA: 10kΩ res0402 resistor
- C20_DISPLAY_BULK: 4.7uF cap0603 capacitor
- R15_DISPLAY_GATE_PU: 100kΩ res0402 resistor
- C21_RF_SHUNT1: 1.5pF capacitor
- L2_RF_SERIES: L2_RF_SERIES, source_component
- C22_RF_SHUNT2: 1.5pF capacitor
- C24_RF_DC_BLOCK: 15pF capacitor
- ANT1: 2450AT18A100E
- TP6_PG: TP6_PG, source_component
NET: R1_CC1_pos
- J1_USB_C A5
- R1_CC1 pin1
NET: R2_CC2_pos
- J1_USB_C B5
- R2_CC2 pin1
NET: VBUS
- U2_CHARGER A1
- C1_VBUS pin1 (+)
- D1_VBUS_TVS C
- J1_USB_C B9
- J1_USB_C A9
NET: PMID
- C2_PMID pin1 (+)
- C3_VINLS pin1 (+)
- U2_CHARGER E4
- U2_CHARGER B2
- U2_CHARGER A2
NET: CHG_VDD_1V8
- U2_CHARGER D1 (VDD)
- C5_CHG_VDD pin1 (+)
NET: U2_CHARGER_IMAX
- U2_CHARGER C3
- R3_IMAX pin1
NET: CHG_PG
- R8_PG_PU pin1
- U2_CHARGER B1
- TP6_PG pin1
NET: WAKE_MR_N
- SW1_WAKE pin2
- U2_CHARGER C1
- SW1_WAKE pin1
NET: BATT_NTC
- J2_BATTERY pin2
- R5_TS_NO_NTC pin1
- R4_TS_BIAS pin1
- U2_CHARGER B4
NET: VSYS
- U3_GAUGE C2 (SRX)
- C4_VSYS_SENSE pin1 (+)
- U2_CHARGER B3
- U2_CHARGER A3
NET: U3_GAUGE_BIN
- U3_GAUGE B1
- R9_BIN_PD pin1
NET: BAT_CELL
- U3_GAUGE C3
- J2_BATTERY pin1
- C7_GAUGE_BAT pin1 (+)
NET: U3_GAUGE_VDD
- U3_GAUGE B3 (VDD)
- C8_GAUGE_VDD pin1 (+)
NET: GAUGE_INT_N
- U3_GAUGE A1
- R10_GAUGE_INT_PU pin1
NET: U1_MCU_DCDC
- U1_MCU DCDC
- L1_DCDC pin1 (+)
NET: VDDR
- C11_VDDR_100N pin1 (+)
- C10_VDDR_1U pin1 (+)
- C9_VDDR_10U pin1 (+)
- L1_DCDC pin2 (-)
- U1_MCU VDDR2
- U1_MCU VDDR1
NET: U1_MCU_VDDD
- U1_MCU VDDD
- C12_VDDD pin1 (+)
NET: Y1_48MHZ_XIN
- U1_MCU X48P
- Y1_48MHZ pin1
NET: Y1_48MHZ_XOUT
- U1_MCU X48N
- Y1_48MHZ pin3
NET: RESET_N
- C17_RESET pin1 (+)
- R11_RESET_PU pin1
- U1_MCU RSTN
- J4_SWD pin3
NET: SWDIO
- U1_MCU DIO16_SWDIO
- J4_SWD pin1
NET: SWDCK
- U1_MCU DIO17_SWDCK
- J4_SWD pin2
NET: CHG_LP
- U1_MCU DIO3_X32P
- U2_CHARGER D3
- R7_LP_BOOT_PD pin1
NET: ACCEL_INT1
- U4_ACCEL INT1
- U1_MCU DIO12
NET: I2C_SCL
- R12_I2C_SCL pin1
- U4_ACCEL SCX
- U1_MCU DIO6_A1
- U3_GAUGE A3 (SCL)
- U2_CHARGER E3 (SCL)
NET: I2C_SDA
- R13_I2C_SDA pin1
- U3_GAUGE A2 (SDA)
- U4_ACCEL SDX
- U1_MCU DIO8
- U2_CHARGER E2 (SDA)
NET: DISP_PWR_N
- R15_DISPLAY_GATE_PU pin1
- U1_MCU DIO20_A11
- Q1_DISPLAY_SWITCH G
NET: SYS_VDD
- R15_DISPLAY_GATE_PU pin2
- Q1_DISPLAY_SWITCH S
- R13_I2C_SDA pin2
- R12_I2C_SCL pin2
- C19_ACCEL_VDDIO pin1 (+)
- C18_ACCEL_VDD pin1 (+)
- U4_ACCEL CSB
- U4_ACCEL VDDIO
- U4_ACCEL VDD
- R11_RESET_PU pin2
- C16_VDDS_BULK pin1 (+)
- C15_VDDS_3 pin1 (+)
- C14_VDDS_2 pin1 (+)
- C13_VDDS_1 pin1 (+)
- U1_MCU VDDS3
- U1_MCU VDDS2
- U1_MCU VDDS1
- R10_GAUGE_INT_PU pin2
- R8_PG_PU pin2
- U2_CHARGER E1
- C6_SYS_VDD pin1 (+)
- U2_CHARGER D4
- J4_SWD pin5
NET: DISP_SCLK
- J3_DISPLAY pin3
- U1_MCU DIO24_A7
NET: DISP_MOSI
- J3_DISPLAY pin4
- U1_MCU DIO13
NET: DISP_CS
- J3_DISPLAY pin5
- U1_MCU DIO11
NET: DISP_DC
- J3_DISPLAY pin6
- U1_MCU DIO21_A10
NET: DISP_RST
- J3_DISPLAY pin7
- U1_MCU DIO4_X32N
NET: DISP_VDD
- C20_DISPLAY_BULK pin1 (+)
- J3_DISPLAY pin1 (VDD)
- Q1_DISPLAY_SWITCH D
NET: U1_MCU_ANT
- U1_MCU ANT
- C21_RF_SHUNT1 pin1
- L2_RF_SERIES pin1 (+)
NET: L2_RF_SERIES_neg
- L2_RF_SERIES pin2 (-)
- C22_RF_SHUNT2 pin1
- C24_RF_DC_BLOCK pin1
NET: GND
- C22_RF_SHUNT2 pin2
- C20_DISPLAY_BULK pin2 (-)
- J3_DISPLAY pin2 (GND)
- C19_ACCEL_VDDIO pin2 (-)
- C18_ACCEL_VDD pin2 (-)
- U4_ACCEL SDO
- U4_ACCEL GNDIO
- U4_ACCEL GND
- C17_RESET pin2 (-)
- Y1_48MHZ GND1
- C16_VDDS_BULK pin2 (-)
- C15_VDDS_3 pin2 (-)
- C14_VDDS_2 pin2 (-)
- C13_VDDS_1 pin2 (-)
- C12_VDDD pin2 (-)
- C11_VDDR_100N pin2 (-)
- C10_VDDR_1U pin2 (-)
- C9_VDDR_10U pin2 (-)
- U1_MCU EP
- U1_MCU GND
- C8_GAUGE_VDD pin2 (-)
- C7_GAUGE_BAT pin2 (-)
- R9_BIN_PD pin2
- U3_GAUGE B2
- U3_GAUGE C1
- J2_BATTERY pin3 (GND)
- SW1_WAKE pin4
- SW1_WAKE pin3
- R7_LP_BOOT_PD pin2
- R5_TS_NO_NTC pin2
- R4_TS_BIAS pin2
- R3_IMAX pin2
- C3_VINLS pin2 (-)
- U2_CHARGER A4 (GND)
- C6_SYS_VDD pin2 (-)
- C5_CHG_VDD pin2 (-)
- C4_VSYS_SENSE pin2 (-)
- C2_PMID pin2 (-)
- C1_VBUS pin2 (-)
- D1_VBUS_TVS A
- R2_CC2 pin2
- R1_CC1 pin2
- J1_USB_C B12
- J1_USB_C EH4
- J1_USB_C A12
- J1_USB_C EH3
- J1_USB_C EH2
- J1_USB_C EH1
- J4_SWD pin4 (GND)
- Y1_48MHZ GND2
- C21_RF_SHUNT1 pin2
NET: ANT1_ANT
- C24_RF_DC_BLOCK pin2
- ANT1 ANT
COMPONENT_PINS:
J1_USB_C (TYPE-C 6PIN)
- pin1(EH4): NETS(GND)
- pin2(EH3): NETS(GND)
- pin3(EH1): NETS(GND)
- pin4(EH2): NETS(GND)
- pin5(A5, CC1): NETS(R1_CC1_pos)
- pin6(B5, CC2): NETS(R2_CC2_pos)
- pin7(A9, VBUS1): NETS(VBUS)
- pin8(B9, VBUS2): NETS(VBUS)
- pin9(A12, GND1): NETS(GND)
- pin10(B12, GND2): NETS(GND)
J2_BATTERY (BM03B-SRSS-TB(LF)(SN))
- pin1(BATTERY_POS): NETS(BAT_CELL)
- pin2(NTC): NETS(BATT_NTC)
- pin3(GND): NETS(GND)
- pin4(MOUNT1): NOT_CONNECTED
- pin5(MOUNT2): NOT_CONNECTED
J3_DISPLAY (BM07B-SRSS-TB(LF)(SN))
- pin1(VDD): NETS(DISP_VDD)
- pin2(GND): NETS(GND)
- pin3(BUS_CLK): NETS(DISP_SCLK)
- pin4(BUS_DATA): NETS(DISP_MOSI)
- pin5(DISP_CS): NETS(DISP_CS)
- pin6(DISP_DC): NETS(DISP_DC)
- pin7(DISP_RST): NETS(DISP_RST)
- pin8(MOUNT1): NOT_CONNECTED
- pin9(MOUNT2): NOT_CONNECTED
R1_CC1 (5.1kΩ res0402)
- pin1(anode, pos, left): NETS(R1_CC1_pos)
- pin2(cathode, neg, right): NETS(GND)
R2_CC2 (5.1kΩ res0402)
- pin1(anode, pos, left): NETS(R2_CC2_pos)
- pin2(cathode, neg, right): NETS(GND)
D1_VBUS_TVS (ESD5Z5.0T1G)
- pin1(C): NETS(VBUS)
- pin2(A): NETS(GND)
C1_VBUS (4.7uF cap0603)
- pin1(anode, pos, left): NETS(VBUS)
- pin2(cathode, neg, right): NETS(GND)
U2_CHARGER (BQ25150YFPR)
- pin1(A1, IN): NETS(VBUS)
- pin2(A2, PMID1): NETS(PMID)
- pin3(A3, BAT1): NETS(VSYS)
- pin4(A4, GND): NETS(GND)
- pin5(B1, PG): NETS(CHG_PG)
- pin6(B2, PMID2): NETS(PMID)
- pin7(B3, BAT2): NETS(VSYS)
- pin8(B4, TS): NETS(BATT_NTC)
- pin9(C1, MR): NETS(WAKE_MR_N)
- pin10(C2, CE): NOT_CONNECTED
- pin11(C3, IMAX): NETS(U2_CHARGER_IMAX)
- pin12(C4, ADCIN): NOT_CONNECTED
- pin13(D1, VDD): NETS(CHG_VDD_1V8)
- pin14(D2, INT): NOT_CONNECTED
- pin15(D3, LP): NETS(CHG_LP)
- pin16(D4, LSLDO): NETS(SYS_VDD)
- pin17(E1, VIO): NETS(SYS_VDD)
- pin18(E2, SDA): NETS(I2C_SDA)
- pin19(E3, SCL): NETS(I2C_SCL)
- pin20(E4, VINLS): NETS(PMID)
C2_PMID (10uF cap0603)
- pin1(anode, pos, left): NETS(PMID)
- pin2(cathode, neg, right): NETS(GND)
C3_VINLS (4.7uF cap0603)
- pin1(anode, pos, left): NETS(PMID)
- pin2(cathode, neg, right): NETS(GND)
SW1_WAKE (1TS026A-1600-0553-CT)
- pin1: NETS(WAKE_MR_N)
- pin2: NETS(WAKE_MR_N)
- pin3: NETS(GND)
- pin4: NETS(GND)
C4_VSYS_SENSE (1uF cap0402)
- pin1(anode, pos, left): NETS(VSYS)
- pin2(cathode, neg, right): NETS(GND)
C5_CHG_VDD (4.7uF cap0603)
- pin1(anode, pos, left): NETS(CHG_VDD_1V8)
- pin2(cathode, neg, right): NETS(GND)
C6_SYS_VDD (4.7uF cap0603)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
R3_IMAX (10kΩ res0402)
- pin1(anode, pos, left): NETS(U2_CHARGER_IMAX)
- pin2(cathode, neg, right): NETS(GND)
R4_TS_BIAS (10kΩ res0402)
- pin1(anode, pos, left): NETS(BATT_NTC)
- pin2(cathode, neg, right): NETS(GND)
R5_TS_NO_NTC (10kΩ undefined)
- pin1(anode, pos, left): NETS(BATT_NTC)
- pin2(cathode, neg, right): NETS(GND)
R7_LP_BOOT_PD (100kΩ res0402)
- pin1(anode, pos, left): NETS(CHG_LP)
- pin2(cathode, neg, right): NETS(GND)
R8_PG_PU (100kΩ res0402)
- pin1(anode, pos, left): NETS(CHG_PG)
- pin2(cathode, neg, right): NETS(SYS_VDD)
U3_GAUGE (BQ27427YZFR)
- pin1(A1, GPOUT): NETS(GAUGE_INT_N)
- pin2(B1, BIN): NETS(U3_GAUGE_BIN)
- pin3(C1, VSS1): NETS(GND)
- pin4(A2, SDA): NETS(I2C_SDA)
- pin5(B2, VSS2): NETS(GND)
- pin6(C2, SRX): NETS(VSYS)
- pin7(A3, SCL): NETS(I2C_SCL)
- pin8(B3, VDD): NETS(U3_GAUGE_VDD)
- pin9(C3, BAT): NETS(BAT_CELL)
R10_GAUGE_INT_PU (10kΩ undefined)
- pin1(anode, pos, left): NETS(GAUGE_INT_N)
- pin2(cathode, neg, right): NETS(SYS_VDD)
R12_I2C_SCL (10kΩ res0402)
- pin1(anode, pos, left): NETS(I2C_SCL)
- pin2(cathode, neg, right): NETS(SYS_VDD)
C7_GAUGE_BAT (1uF cap0402)
- pin1(anode, pos, left): NETS(BAT_CELL)
- pin2(cathode, neg, right): NETS(GND)
C8_GAUGE_VDD (2.2uF cap0402)
- pin1(anode, pos, left): NETS(U3_GAUGE_VDD)
- pin2(cathode, neg, right): NETS(GND)
R9_BIN_PD (10kΩ res0402)
- pin1(anode, pos, left): NETS(U3_GAUGE_BIN)
- pin2(cathode, neg, right): NETS(GND)
U1_MCU (CC2340R52E0RGER)
- pin1(ANT): NETS(U1_MCU_ANT)
- pin2(VDDR1): NETS(VDDR)
- pin3(DIO8): NETS(I2C_SDA)
- pin4(DIO11): NETS(DISP_CS)
- pin5(DIO12): NETS(ACCEL_INT1)
- pin6(DIO13): NETS(DISP_MOSI)
- pin7(DIO16_SWDIO): NETS(SWDIO)
- pin8(DIO17_SWDCK): NETS(SWDCK)
- pin9(DIO20_A11): NETS(DISP_PWR_N)
- pin10(DIO21_A10): NETS(DISP_DC)
- pin11(VDDS1): NETS(SYS_VDD)
- pin12(DIO24_A7): NETS(DISP_SCLK)
- pin13(RSTN): NETS(RESET_N)
- pin14(DIO3_X32P): NETS(CHG_LP)
- pin15(DIO4_X32N): NETS(DISP_RST)
- pin16(VDDD): NETS(U1_MCU_VDDD)
- pin17(DCDC): NETS(U1_MCU_DCDC)
- pin18(VDDS2): NETS(SYS_VDD)
- pin19(DIO6_A1): NETS(I2C_SCL)
- pin20(VDDR2): NETS(VDDR)
- pin21(X48P): NETS(Y1_48MHZ_XIN)
- pin22(X48N): NETS(Y1_48MHZ_XOUT)
- pin23(GND): NETS(GND)
- pin24(VDDS3): NETS(SYS_VDD)
- pin25(EP): NETS(GND)
J4_SWD (BM05B-SRSS-TB(LF)(SN))
- pin1(SWDIO): NETS(SWDIO)
- pin2(SWDCK): NETS(SWDCK)
- pin3(RESET_N): NETS(RESET_N)
- pin4(GND): NETS(GND)
- pin5(VTREF): NETS(SYS_VDD)
- pin6(MOUNT1): NOT_CONNECTED
- pin7(MOUNT2): NOT_CONNECTED
Q1_DISPLAY_SWITCH (AO3401A)
- pin1(G): NETS(DISP_PWR_N)
- pin2(S): NETS(SYS_VDD)
- pin3(D): NETS(DISP_VDD)
Y1_48MHZ (ABM11W-48.0000MHZ-7-B1U-T3)
- pin1(XIN): NETS(Y1_48MHZ_XIN)
- pin2(GND1): NETS(GND)
- pin3(XOUT): NETS(Y1_48MHZ_XOUT)
- pin4(GND2): NETS(GND)
L1_DCDC
- pin1(anode, pos, left): NETS(U1_MCU_DCDC)
- pin2(cathode, neg, right): NETS(VDDR)
C9_VDDR_10U (10uF cap0603)
- pin1(anode, pos, left): NETS(VDDR)
- pin2(cathode, neg, right): NETS(GND)
C10_VDDR_1U (1uF cap0402)
- pin1(anode, pos, left): NETS(VDDR)
- pin2(cathode, neg, right): NETS(GND)
C11_VDDR_100N (100nF cap0402)
- pin1(anode, pos, left): NETS(VDDR)
- pin2(cathode, neg, right): NETS(GND)
C12_VDDD (1uF cap0402)
- pin1(anode, pos, left): NETS(U1_MCU_VDDD)
- pin2(cathode, neg, right): NETS(GND)
C13_VDDS_1 (100nF cap0402)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
C14_VDDS_2 (100nF cap0402)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
C15_VDDS_3 (100nF cap0402)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
C16_VDDS_BULK (10uF cap0603)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
R11_RESET_PU (100kΩ res0402)
- pin1(anode, pos, left): NETS(RESET_N)
- pin2(cathode, neg, right): NETS(SYS_VDD)
C17_RESET (100nF cap0402)
- pin1(anode, pos, left): NETS(RESET_N)
- pin2(cathode, neg, right): NETS(GND)
U4_ACCEL (BMA400)
- pin1(SDO): NETS(GND)
- pin2(SDX): NETS(I2C_SDA)
- pin3(VDDIO): NETS(SYS_VDD)
- pin4(NC2): NOT_CONNECTED
- pin5(INT1): NETS(ACCEL_INT1)
- pin6(INT2): NOT_CONNECTED
- pin7(VDD): NETS(SYS_VDD)
- pin8(GNDIO): NETS(GND)
- pin9(GND): NETS(GND)
- pin10(CSB): NETS(SYS_VDD)
- pin11(NC1): NOT_CONNECTED
- pin12(SCX): NETS(I2C_SCL)
C18_ACCEL_VDD (100nF cap0402)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
C19_ACCEL_VDDIO (100nF cap0402)
- pin1(anode, pos, left): NETS(SYS_VDD)
- pin2(cathode, neg, right): NETS(GND)
R13_I2C_SDA (10kΩ res0402)
- pin1(anode, pos, left): NETS(I2C_SDA)
- pin2(cathode, neg, right): NETS(SYS_VDD)
C20_DISPLAY_BULK (4.7uF cap0603)
- pin1(anode, pos, left): NETS(DISP_VDD)
- pin2(cathode, neg, right): NETS(GND)
R15_DISPLAY_GATE_PU (100kΩ res0402)
- pin1(anode, pos, left): NETS(DISP_PWR_N)
- pin2(cathode, neg, right): NETS(SYS_VDD)
C21_RF_SHUNT1 (1.5pF undefined)
- pin1: NETS(U1_MCU_ANT)
- pin2: NETS(GND)
L2_RF_SERIES
- pin1(anode, pos, left): NETS(U1_MCU_ANT)
- pin2(cathode, neg, right): NETS(L2_RF_SERIES_neg)
C22_RF_SHUNT2 (1.5pF undefined)
- pin1: NETS(L2_RF_SERIES_neg)
- pin2: NETS(GND)
C24_RF_DC_BLOCK (15pF undefined)
- pin1: NETS(L2_RF_SERIES_neg)
- pin2: NETS(ANT1_ANT)
ANT1 (2450AT18A100E)
- pin1(ANT, FEED): NETS(ANT1_ANT)
- pin2(NC): NOT_CONNECTED
TP6_PG
- pin1: NETS(CHG_PG)
Related Packages
More from this authorseveibar/spi-display-webcam-interceptorThis collection of code defines various hardware components, including an crystal oscillator, microcontroller, voltage regulators, inductors, connectors, and logic gates, each represented with physical footprint, pin configurations, and 3D CAD models for PCB design and integration.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newShiboSoftwareDev/mspm0g3507-usb-c-dev-boardThe circuit assembles a USB-C port with integrated ESD protection, power regulation, UART interface, and microcontroller (MSPM0G3507) with supporting components for USB data lines, CC termination, I2C, SPI, reset circuitry, and indicator LEDs.