seveibar/pedometer

This hardware setup integrates a Type-C connector, battery, display, and RF antenna connected through a microcontroller, USB interface, charging and fuel gauge ICs, along with associated passive components, enabling power management, data communication, and signal processing.

Version
0.4.4
License
unset
Stars
1

VALIDATION.md

# Full-board raw validation

**PASS — zero raw errors**, cold-cache build on 2026-09-05T20:27:16.682Z.

- 52 PCB components, 138 PCB traces, 122 vias.
- Both crystal signals: zero vias. X48P 3.137 mm; X48N 3.268 mm.
- One stock `beta_pipeline9` pass at 100× effort; no routing phases or breakout directives.
- tscircuit 0.0.2463, unmodified core 0.0.1837, capacity autorouter 0.0.882.
- TypeScript and logical design checks pass.
- Raw emitted errors, fresh `runAllChecks` and trace-continuity checks: zero errors.
- `tsci build --site` completed; images and review BOM/PnP use the same raw JSON.
- No error filtering, generated geometry edits or custom routing algorithms.

Circuit SHA-256: `b4c11d0def2c402f709eec13556bcc44b0ba57534a634fda4a54eb1c6800727e`.

## Remaining warnings and physical review

The validator retains 123 warnings:

- `source_refdes_convention_warning`: 3
- `source_unnamed_trace_warning`: 40
- `schematic_element_outside_sheet_warning`: 17
- `pcb_connector_not_in_accessible_orientation_warning`: 2
- `pcb_component_missing_courtyard_warning`: 1
- `supplier_footprint_mismatch_warning`: 24
- `source_component_pins_underspecified_warning`: 12
- `source_no_power_pin_defined_warning`: 12
- `source_no_ground_pin_defined_warning`: 12

Full messages are in validation.json. These have not been suppressed or represented as resolved.

This is a routed prototype design, not a fabrication approval. HDI via spans, footprints, antenna geometry and RF impedance/matching require physical review. Firmware and battery-life measurements are outstanding. See DESIGN.md and ASSEMBLY.md.