seveibar/pedometer
This hardware setup integrates a Type-C connector, battery, display, and RF antenna connected through a microcontroller, USB interface, charging and fuel gauge ICs, along with associated passive components, enabling power management, data communication, and signal processing.
- Version
- 0.4.4
- License
- unset
- Stars
- 1
POWER_BUDGET.csv
scenario,nominal_mAh,usable_fraction,background_uA_assumed,OLED_mA_assumed,seconds_per_view,views_per_day,OLED_average_uA,total_average_uA,modeled_days
Typical use,100,0.8,55,20,5,20,23.148,78.148,42.65
Double background,100,0.8,110,20,5,20,23.148,133.148,25.03
Frequent viewing,100,0.8,55,20,10,60,138.889,193.889,17.19
Display always on,100,0.8,55,20,86400,1,20000.0,20055.0,0.17
Counting and BLE only,100,0.8,55,20,0,0,0.0,55.0,60.61
Related Packages
More from this authorseveibar/spi-display-webcam-interceptorThis collection of code defines various hardware components, including an crystal oscillator, microcontroller, voltage regulators, inductors, connectors, and logic gates, each represented with physical footprint, pin configurations, and 3D CAD models for PCB design and integration.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newShiboSoftwareDev/mspm0g3507-usb-c-dev-boardThe circuit assembles a USB-C port with integrated ESD protection, power regulation, UART interface, and microcontroller (MSPM0G3507) with supporting components for USB data lines, CC termination, I2C, SPI, reset circuitry, and indicator LEDs.