seveibar/minimal-rp2040
This design features a Raspberry Pi RP2040 microcontroller with integrated decoupling capacitors, QSPI flash memory, crystal oscillator, and USB power circuitry, all mounted on a 65mm by 60mm four-layer PCB.
Usage: To import and use the RP2040 component in a tscircuit project: 1. Import the component: ```tsx import { RP2040 } from "@tsci/seveibar.minimal-rp2040" ``` 2. Use the component in a board: ```tsx <board> <RP2040 name="U3" pcbX={0} pcbY={0} connections={{ IOVDD1: "net.V3V3", // Add other required connections }} /> </board> ``` Key points: - Specify a name for the component - Set position using `pcbX` and `pcbY` - Define necessary network connections in the `connections` prop - Ensure proper power and ground connections
- Version
- 1.0.1
- License
- unset
- Stars
- 1
imports/RP2040.tsx
import type { ChipProps } from "@tscircuit/props"
const pinLabels = {
pin1: ["IOVDD1"],
pin2: ["GPIO0"],
pin3: ["GPIO1"],
pin4: ["GPIO2"],
pin5: ["GPIO3"],
pin6: ["GPIO4"],
pin7: ["GPIO5"],
pin8: ["GPIO6"],
pin9: ["GPIO7"],
pin10: ["IOVDD2"],
pin11: ["GPIO8"],
pin12: ["GPIO9"],
pin13: ["GPIO10"],
pin14: ["GPIO11"],
pin15: ["GPIO12"],
pin16: ["GPIO13"],
pin17: ["GPIO14"],
pin18: ["GPIO15"],
pin19: ["TESTEN"],
pin20: ["XIN"],
pin21: ["XOUT"],
pin22: ["IOVDD3"],
pin23: ["DVDD1"],
pin24: ["SWCLK"],
pin25: ["SWD"],
pin26: ["RUN"],
pin27: ["GPIO16"],
pin28: ["GPIO17"],
pin29: ["GPIO18"],
pin30: ["GPIO19"],
pin31: ["GPIO20"],
pin32: ["GPIO21"],
pin33: ["IOVDD4"],
pin34: ["GPIO22"],
pin35: ["GPIO23"],
pin36: ["GPIO24"],
pin37: ["GPIO25"],
pin38: ["GPIO26_ADC0"],
pin39: ["GPIO27_ADC1"],
pin40: ["GPIO28_ADC2"],
pin41: ["GPIO29_ADC3"],
pin42: ["IOVDD5"],
pin43: ["ADC_AVDD"],
pin44: ["VREG_IN"],
pin45: ["VREG_VOUT"],
pin46: ["USB_DM"],
pin47: ["USB_DP"],
pin48: ["USB_VDD"],
pin49: ["IOVDD6"],
pin50: ["DVDD2"],
pin51: ["QSPI_SD3"],
pin52: ["QSPI_SCLK"],
pin53: ["QSPI_SD0"],
pin54: ["QSPI_SD2"],
pin55: ["QSPI_SD1"],
pin56: ["QSPI_SS"],
pin57: ["GND"],
} as const
export const RP2040 = (props: ChipProps<typeof pinLabels>) => {
return (
<chip
pinLabels={pinLabels}
supplierPartNumbers={{
jlcpcb: ["C2040"],
}}
manufacturerPartNumber="RP2040"
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="-3.5501580000000104mm"
pcbY="2.6000710000001845mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin2"]}
pcbX="-3.5501580000000104mm"
pcbY="2.200021000000106mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin3"]}
pcbX="-3.5501580000000104mm"
pcbY="1.7999710000001414mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin4"]}
pcbX="-3.5501580000000104mm"
pcbY="1.399921000000063mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin5"]}
pcbX="-3.5501580000000104mm"
pcbY="1.0001250000001392mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin6"]}
pcbX="-3.5501580000000104mm"
pcbY="0.6000750000000608mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin7"]}
pcbX="-3.5501580000000104mm"
pcbY="0.20002500000009604mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin8"]}
pcbX="-3.5501580000000104mm"
pcbY="-0.20002499999998236mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin9"]}
pcbX="-3.5501580000000104mm"
pcbY="-0.6000749999999471mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin10"]}
pcbX="-3.5501580000000104mm"
pcbY="-0.9998709999999846mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin11"]}
pcbX="-3.5501580000000104mm"
pcbY="-1.3999209999999493mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin12"]}
pcbX="-3.5501580000000104mm"
pcbY="-1.799970999999914mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin13"]}
pcbX="-3.5501580000000104mm"
pcbY="-2.2000209999998788mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin14"]}
pcbX="-3.5501580000000104mm"
pcbY="-2.6000709999998435mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin15"]}
pcbX="-2.5999439999999368mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin16"]}
pcbX="-2.200148000000013mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin17"]}
pcbX="-1.8000979999999345mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin18"]}
pcbX="-1.4000480000001971mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin19"]}
pcbX="-0.999998000000005mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin20"]}
pcbX="-0.5999480000000403mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin21"]}
pcbX="-0.20015200000000277mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin22"]}
pcbX="0.19989799999996194mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin23"]}
pcbX="0.5999479999999267mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin24"]}
pcbX="0.999998000000005mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin25"]}
pcbX="1.4000479999999698mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin26"]}
pcbX="1.799844000000121mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin27"]}
pcbX="2.1998939999998584mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin28"]}
pcbX="2.5999439999999368mm"
pcbY="-3.55003099999999mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin29"]}
pcbX="3.5501580000000104mm"
pcbY="-2.6000709999998435mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin30"]}
pcbX="3.5501580000000104mm"
pcbY="-2.2000209999998788mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin31"]}
pcbX="3.5501580000000104mm"
pcbY="-1.799970999999914mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin32"]}
pcbX="3.5501580000000104mm"
pcbY="-1.3999209999999493mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin33"]}
pcbX="3.5501580000000104mm"
pcbY="-0.9998709999999846mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin34"]}
pcbX="3.5501580000000104mm"
pcbY="-0.6000749999999471mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin35"]}
pcbX="3.5501580000000104mm"
pcbY="-0.20002499999998236mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin36"]}
pcbX="3.5501580000000104mm"
pcbY="0.20002500000009604mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin37"]}
pcbX="3.5501580000000104mm"
pcbY="0.6000750000000608mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin38"]}
pcbX="3.5501580000000104mm"
pcbY="1.0001250000001392mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin39"]}
pcbX="3.5501580000000104mm"
pcbY="1.399921000000063mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin40"]}
pcbX="3.5501580000000104mm"
pcbY="1.7999710000001414mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin41"]}
pcbX="3.5501580000000104mm"
pcbY="2.200021000000106mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin42"]}
pcbX="3.5501580000000104mm"
pcbY="2.6000710000001845mm"
width="1.0999978mm"
height="0.19999959999999997mm"
shape="rect"
/>
<smtpad
portHints={["pin43"]}
pcbX="2.5999439999999368mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin44"]}
pcbX="2.1998939999998584mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin45"]}
pcbX="1.799844000000121mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin46"]}
pcbX="1.4000479999999698mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin47"]}
pcbX="0.999998000000005mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin48"]}
pcbX="0.5999479999999267mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin49"]}
pcbX="0.19989799999996194mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin50"]}
pcbX="-0.20015200000000277mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin51"]}
pcbX="-0.5999480000000403mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin52"]}
pcbX="-0.999998000000005mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin53"]}
pcbX="-1.4000480000001971mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin54"]}
pcbX="-1.8000979999999345mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin55"]}
pcbX="-2.200148000000013mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin56"]}
pcbX="-2.5999439999999368mm"
pcbY="3.5500310000001036mm"
width="0.19999959999999997mm"
height="1.0999978mm"
shape="rect"
/>
<smtpad
portHints={["pin57"]}
pcbX="-1.1368683772161603e-13mm"
pcbY="0.00012700000002041634mm"
width="3.0999938mm"
height="3.0999938mm"
shape="rect"
/>
<silkscreenpath
route={[
{ x: -3.2409891999999445, y: 3.5000184000000445 },
{ x: -3.2409891999999445, y: 3.4031682000000956 },
{ x: -3.5000691999999844, y: 3.1440882000001693 },
]}
/>
<silkscreenpath
route={[
{ x: -3.5000691999999844, y: 2.9311854000001176 },
{ x: -2.9311854000001176, y: 3.5000184000000445 },
]}
/>
<silkscreenpath
route={[
{ x: -3.5000691999999844, y: 2.9311854000001176 },
{ x: -3.5000691999999844, y: 3.5000184000000445 },
]}
/>
<silkscreenpath
route={[
{ x: -2.9311854000001176, y: -3.499916799999937 },
{ x: -3.40004399999998, y: -3.499916799999937 },
{ x: -3.5000691999999844, y: -3.499916799999937 },
{ x: -3.5000691999999844, y: -2.9310837999998967 },
]}
/>
<silkscreenpath
route={[
{ x: 3.499916800000051, y: -2.9310837999998967 },
{ x: 3.499916800000051, y: -3.499916799999937 },
{ x: 2.931083800000124, y: -3.499916799999937 },
]}
/>
<silkscreenpath
route={[
{ x: 2.931083800000124, y: 3.5000184000000445 },
{ x: 3.499916800000051, y: 3.5000184000000445 },
{ x: 3.499916800000051, y: 2.9311854000001176 },
]}
/>
<silkscreenpath
route={[
{ x: -3.5000691999999844, y: 3.5000184000000445 },
{ x: -2.9311854000001176, y: 3.5000184000000445 },
]}
/>
</footprint>
}
cadModel={{
objUrl:
"https://modelcdn.tscircuit.com/easyeda_models/download?uuid=76b360a9d4c54384a4e47d7e5af156df&pn=C2040",
rotationOffset: { x: 180, y: 0, z: 0 },
positionOffset: {
x: -1.1368683772161603e-13,
y: 1.1368683772161603e-13,
z: 1.8,
},
}}
{...props}
/>
)
}
Related Packages
More from this authortscircuit/autorouting-dataset-01This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.
Similar packageabse/gameboyThis code defines the hardware mapping and schematic connections for a Raspberry Pi Pico-based development board featuring RP2040 microcontroller, USB-C connector, various power regulation components, decoupling capacitors, resistors, LEDs, headers, and supporting passive components for signal integrity and debugging.
Discover something newimrishabh18/fitness_watchThis circuit integrates an ESP-12E microcontroller with various sensors, relays, and power management components, including an AO3400A transistor for switching loads, to enable wireless control and sensing functions.