rushabhcodes/sbc_allwinner_v3s
A 5 V USB‑C–powered Allwinner V3s embedded board with AXP203/AP61100 power regulation, microSD boot, UART, RTC/main clocks, USB device, and 10/100 Ethernet via an integrated-magnetics RJ45.
- Version
- 0.0.11
- License
- unset
- Stars
- 0
imports/AXP203.tsx
import type { ChipProps } from "@tscircuit/props"
const pinLabels = {
pin1: ["SDA"],
pin2: ["SCK"],
pin3: ["GPIO3"],
pin4: ["N_OE"],
pin5: ["GPIO2"],
pin6: ["N_VBUSEN"],
pin7: ["VIN2"],
pin8: ["LX2"],
pin9: ["PGND2"],
pin10: ["DCDC2"],
pin11: ["LDO4"],
pin12: ["LDO2"],
pin13: ["LDOO24IN"],
pin14: ["VIN3"],
pin15: ["LX3"],
pin16: ["PGND3"],
pin17: ["DCDC3"],
pin18: ["GPIO1"],
pin19: ["GPIO0"],
pin20: ["EXTEN"],
pin21: ["APS"],
pin22: ["AGND"],
pin23: ["BIAS"],
pin24: ["VREF"],
pin25: ["PWROK"],
pin26: ["VINT"],
pin27: ["LDO1SET"],
pin28: ["LDO1"],
pin29: ["DC3SET"],
pin30: ["BACKUP"],
pin31: ["VBUS"],
pin32: ["ACIN2"],
pin33: ["ACIN1"],
pin34: ["IPSOUT2"],
pin35: ["IPSOUT1"],
pin36: ["CHGLED"],
pin37: ["TS"],
pin38: ["BAT2"],
pin39: ["BAT1"],
pin40: ["LDO3IN"],
pin41: ["LDO3"],
pin42: ["BATSENSE"],
pin43: ["CHAENEN"],
pin44: ["VIN1"],
pin45: ["LX1"],
pin46: ["PGND1"],
pin47: ["PWRON"],
pin48: ["IRQ"],
pin49: ["EP"]
} as const
const pinAttributes = {
pin7: {requiresPower: true},
pin9: {requiresGround: true},
pin14: {requiresPower: true},
pin16: {requiresGround: true},
pin22: {requiresGround: true},
pin44: {requiresPower: true},
pin46: {requiresGround: true}
} as const
export const AXP203 = (props: ChipProps<typeof pinLabels>) => {
return (
<chip
pinLabels={pinLabels}
pinAttributes={pinAttributes}
supplierPartNumbers={{
"jlcpcb": [
"C3036457"
]
}}
manufacturerPartNumber="AXP203"
footprint={<footprint>
<smtpad portHints={["pin49"]} pcbX="0mm" pcbY="0mm" width="4.1999916mm" height="4.1999916mm" shape="rect" />
<smtpad portHints={["pin43"]} pcbX="-0.199898mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin42"]} pcbX="0.199898mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin41"]} pcbX="0.599948mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin40"]} pcbX="0.999998mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin39"]} pcbX="1.400048mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin38"]} pcbX="1.800098mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin37"]} pcbX="2.199894mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin44"]} pcbX="-0.599948mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin45"]} pcbX="-0.999998mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin46"]} pcbX="-1.400048mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin47"]} pcbX="-1.800098mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin48"]} pcbX="-2.199894mm" pcbY="2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin13"]} pcbX="-2.199894mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin14"]} pcbX="-1.800098mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin15"]} pcbX="-1.400048mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin16"]} pcbX="-0.999998mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin17"]} pcbX="-0.599948mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin24"]} pcbX="2.199894mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin23"]} pcbX="1.800098mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin22"]} pcbX="1.400048mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin21"]} pcbX="0.999998mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin20"]} pcbX="0.599948mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin19"]} pcbX="0.199898mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin18"]} pcbX="-0.199898mm" pcbY="-2.949956mm" width="0.1999996mm" height="0.850011mm" shape="rect" />
<smtpad portHints={["pin12"]} pcbX="-2.949956mm" pcbY="-2.199894mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin11"]} pcbX="-2.949956mm" pcbY="-1.800098mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin10"]} pcbX="-2.949956mm" pcbY="-1.400048mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin9"]} pcbX="-2.949956mm" pcbY="-0.999998mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin8"]} pcbX="-2.949956mm" pcbY="-0.599948mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-2.949956mm" pcbY="2.199894mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-2.949956mm" pcbY="1.800098mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="-2.949956mm" pcbY="1.400048mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="-2.949956mm" pcbY="0.999998mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="-2.949956mm" pcbY="0.599948mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="-2.949956mm" pcbY="0.199898mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin7"]} pcbX="-2.949956mm" pcbY="-0.199898mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin36"]} pcbX="2.949956mm" pcbY="2.199894mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin35"]} pcbX="2.949956mm" pcbY="1.800098mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin34"]} pcbX="2.949956mm" pcbY="1.400048mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin33"]} pcbX="2.949956mm" pcbY="0.999998mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin32"]} pcbX="2.949956mm" pcbY="0.599948mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin25"]} pcbX="2.949956mm" pcbY="-2.199894mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin26"]} pcbX="2.949956mm" pcbY="-1.800098mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin27"]} pcbX="2.949956mm" pcbY="-1.400048mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin28"]} pcbX="2.949956mm" pcbY="-0.999998mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin29"]} pcbX="2.949956mm" pcbY="-0.599948mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin30"]} pcbX="2.949956mm" pcbY="-0.199898mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin31"]} pcbX="2.949956mm" pcbY="0.199898mm" width="0.850011mm" height="0.1999996mm" shape="rect" />
<via pcbX="1.500124mm" pcbY="1.49987mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-1.49987mm" pcbY="0.499872mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-1.49987mm" pcbY="-0.500126mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-1.49987mm" pcbY="-1.500124mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-0.499872mm" pcbY="-1.500124mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-1.49987mm" pcbY="1.49987mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="0.500126mm" pcbY="-1.500124mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="0.500126mm" pcbY="-0.500126mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="0.500126mm" pcbY="0.499872mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="0.500126mm" pcbY="1.49987mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="1.500124mm" pcbY="-1.500124mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="1.500124mm" pcbY="-0.500126mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="1.500124mm" pcbY="0.499872mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-0.499872mm" pcbY="-0.500126mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-0.499872mm" pcbY="1.49987mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<via pcbX="-0.499872mm" pcbY="0.499872mm" outerDiameter="0.6096mm" holeDiameter="0.3000248mm" layers={["top","bottom"]} />
<silkscreenpath route={[{"x":-2.999994000000129,"y":-2.4999950000000126},{"x":-2.999994000000129,"y":-2.999994000000015}]} />
<silkscreenpath route={[{"x":-2.999994000000129,"y":-2.999994000000015},{"x":-2.4999950000001263,"y":-2.999994000000015}]} />
<silkscreenpath route={[{"x":2.499994999999899,"y":-2.999994000000015},{"x":2.999994000000015,"y":-2.999994000000015}]} />
<silkscreenpath route={[{"x":2.999994000000015,"y":-2.999994000000015},{"x":2.999994000000015,"y":-2.4999950000000126}]} />
<silkscreenpath route={[{"x":2.999994000000015,"y":2.4999950000001263},{"x":2.999994000000015,"y":2.999994000000015}]} />
<silkscreenpath route={[{"x":2.999994000000015,"y":2.999994000000015},{"x":2.499994999999899,"y":2.999994000000015}]} />
<silkscreenpath route={[{"x":-2.999994000000129,"y":2.999994000000015},{"x":-2.999994000000129,"y":2.4999950000001263}]} />
<silkscreenpath route={[{"x":-2.4999950000001263,"y":2.999994000000015},{"x":-2.999994000000129,"y":2.999994000000015}]} />
<silkscreencircle pcbX="-3.700018mm" pcbY="2.249932mm" radius="0.100076mm" />
<silkscreentext text="{NAME}" pcbX="-0.2286mm" pcbY="4.3782mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-4.060000000000059,"y":3.6282000000001062},{"x":3.6027999999998883,"y":3.6282000000001062},{"x":3.6027999999998883,"y":-3.6281999999999925},{"x":-4.060000000000059,"y":-3.6281999999999925},{"x":-4.060000000000059,"y":3.6282000000001062}]} />
</footprint>}
cadModel={{
objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C3036457.obj?uuid=6fb86005e4ec4d598a2ab66efa0e3df1",
stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C3036457.step?uuid=6fb86005e4ec4d598a2ab66efa0e3df1",
pcbRotationOffset: 0,
modelOriginPosition: { x: 0.000012700000070253736, y: 0, z: -0.02 },
}}
{...props}
/>
)
}Related Packages
More from this authorrushabhcodes/RP2040A compact electronic circuit integrating a USB-C port, a voltage regulator (AMS1117 3.3V), a Raspberry Pi Pico RP2040 microcontroller, supporting power management, voltage regulation, and USB connectivity with associated passive components.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newabse/museair-usbUSB-C–powered ESP32-C3 controller board with AP63203 buck conversion, AP2112K 3.3V regulation, I²C SEN62 sensor interface, status LED, buttons, UART/I²C headers, and extensive decoupling.