rushabhcodes/fidget-counter

validation/print-wall-sections.json

{
  "passed": true,
  "physical_tested": false,
  "method": "Material point probes across known critical analytic STEP wall/floor sections; no physical strength inference",
  "sections": [
    {
      "section": "Solid fixed bearing web5mm at0deg",
      "sampled_material_points": 96,
      "passed": true
    },
    {
      "section": "Solid fixed bearing web5mm at105deg",
      "sampled_material_points": 96,
      "passed": true
    },
    {
      "section": "Solid fixed bearing web5mm at255deg",
      "sampled_material_points": 96,
      "passed": true
    },
    {
      "section": "Bearing shaft wall1.2mm",
      "sampled_material_points": 24,
      "passed": true
    },
    {
      "section": "Push-fit shaft nominal wall1.375mm",
      "sampled_material_points": 72,
      "passed": true
    },
    {
      "section": "Continuous ring bonding roof1.5mm",
      "sampled_material_points": 72,
      "passed": true
    },
    {
      "section": "PCB post pilot wall0.80mm at45deg",
      "sampled_material_points": 48,
      "passed": true
    },
    {
      "section": "PCB post pilot wall0.80mm at135deg",
      "sampled_material_points": 48,
      "passed": true
    },
    {
      "section": "PCB post pilot wall0.80mm at225deg",
      "sampled_material_points": 48,
      "passed": true
    },
    {
      "section": "PCB post pilot wall0.80mm at315deg",
      "sampled_material_points": 48,
      "passed": true
    }
  ],
  "cap_and_nut_wall_checks": "validation/print-readiness.json",
  "limits": [
    "Thread forming removes material not represented by the pilot bore",
    "Single variable-width non-load rims need printer qualification",
    "Section sampling is not a global minimum-thickness proof of all decorative features"
  ],
  "source_sha256": {
    "mechanical/STEP_Parts/Stationary_Base.step": "97a485258f61aee789dde9ab2957f2351f0e246bcbc0e503a8df9cf7be04463b",
    "mechanical/printing/check_wall_sections.py": "6e428d6530aade964682c29eff0a9f77c026f64a4f1ea3bce19f5c6605d579a0",
    "mechanical/enclosure-parameters.json": "0d5aa354aea49bbf034dfe73290f86b36ebd1bd161eee7f42b70fdccbfb642ec"
  }
}