rushabhcodes/fidget-counter

validation/gerber-parity-audit.json

{
  "passed": true,
  "physical_tested": false,
  "parser": "gerbonara 1.6.3",
  "method": "Ordered dark/clear artwork primitives, independent of generator; compare complete Cu/mask/paste unions and every drill/outline segment",
  "artwork_tolerance_mm": 0.002,
  "drill_coordinate_tolerance_mm": 0.00051,
  "layers": {
    "F_Cu.gbr": {
      "source_area_mm2": 868.1464217519659,
      "gerber_area_mm2": 868.1464406821901,
      "symmetric_difference_mm2": 5.1546241666900397e-05,
      "unexplained_added_mm2": 0.0,
      "unexplained_missing_mm2": 0.0
    },
    "F_Mask.gbr": {
      "source_area_mm2": 78.85993704604546,
      "gerber_area_mm2": 78.85995726194528,
      "symmetric_difference_mm2": 4.8815960650616875e-05,
      "unexplained_added_mm2": 0.0,
      "unexplained_missing_mm2": 0.0
    },
    "F_Paste.gbr": {
      "source_area_mm2": 30.513579021768397,
      "gerber_area_mm2": 30.51359498819579,
      "symmetric_difference_mm2": 2.905926141596814e-05,
      "unexplained_added_mm2": 0.0,
      "unexplained_missing_mm2": 0.0
    },
    "B_Cu.gbr": {
      "source_area_mm2": 910.9362861272692,
      "gerber_area_mm2": 910.9362860501784,
      "symmetric_difference_mm2": 2.8682253022898814e-05,
      "unexplained_added_mm2": 0.0,
      "unexplained_missing_mm2": 0.0
    },
    "B_Mask.gbr": {
      "source_area_mm2": 39.68482887763633,
      "gerber_area_mm2": 39.68482879763641,
      "symmetric_difference_mm2": 1.3560092300965477e-05,
      "unexplained_added_mm2": 0.0,
      "unexplained_missing_mm2": 0.0
    },
    "B_Paste.gbr": {
      "source_area_mm2": 11.995152019247977,
      "gerber_area_mm2": 11.995151000050006,
      "symmetric_difference_mm2": 1.399997176519278e-06,
      "unexplained_added_mm2": 0.0,
      "unexplained_missing_mm2": 0.0
    },
    "drill-L1-L2.drl": {
      "holes": 40,
      "maximum_coordinate_or_diameter_error_mm": 4.8728265181097186e-05
    },
    "drill_npth.drl": {
      "holes": 4,
      "maximum_coordinate_or_diameter_error_mm": 2.7432303312480144e-05
    },
    "Edge_Cuts.gbr": {
      "closed": true,
      "segments": 128,
      "diameter_mm": 36.5
    }
  },
  "parser_notes": [
    "G90 absolute-position command occurs after M95; parsed positions match source"
  ],
  "negative_checks_passed": [
    "removed_real_copper",
    "added_copper_in_mounting_drill"
  ],
  "minimum_via_to_foreign_pad_mm": 0.1941246743604213,
  "minimum_drill_to_any_SMT_land_mm": 0.034354999999813535,
  "archive_sha256": "4940c399ea076f13b7e2e65218482afe31cb42ecf59efdfebb91e5970e2d8dba",
  "source_sha256": {
    "validation/check-gerber-parity.py": "aa28fd7e667fd6d4b8da193d7874f30b19d12aa15416adb2e37bb1aa9a152d62",
    "published.circuit.json": "068bc3868214c919f48fe47b5a090fd6159bac2213aa5647a4a6a0e10da998dd",
    "gerber-compat.mjs": "2583f05c71c78e4974e9b6ef8df230a8d0d81c6827d8f7d38ed4879600e2bc16",
    "validation/requirements-gerber.txt": "f98e5bcec5a4c6e77f7c44a5e7532089257ad297339086a7020dbaac52af465e"
  }
}