rushabhcodes/fidget-counter

mechanical/printing/PETG-0.4-audit.ini

# Generic PETG audit profile; configure your actual printer before printing.
# Geometry audit only: no printer-specific start/end G-code is supplied.
layer_height = 0.15
first_layer_height = 0.2
nozzle_diameter = 0.4
filament_diameter = 1.75
filament_density = 1.27
filament_type = PETG
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 200
gcode_flavor = marlin2
use_relative_e_distances = 1
perimeters = 4
fill_density = 100%
fill_pattern = rectilinear
solid_fill_pattern = rectilinear
top_solid_layers = 6
bottom_solid_layers = 6
extrusion_width = 0.45
first_layer_extrusion_width = 0.45
external_perimeter_extrusion_width = 0.45
perimeter_extrusion_width = 0.45
infill_extrusion_width = 0.45
solid_infill_extrusion_width = 0.45
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.4
perimeter_generator = arachne
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 35
top_solid_infill_speed = 25
bridge_speed = 20
first_layer_speed = 15
travel_speed = 120
bridge_flow_ratio = 0.85
support_material = 0
support_material_auto = 1
support_material_threshold = 45
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_bottom_contact_distance = 0.2
support_material_interface_layers = 3
support_material_spacing = 2
support_material_xy_spacing = 0.4
support_material_pattern = rectilinear
support_material_style = snug
support_material_speed = 30
support_material_interface_speed = 20
support_material_enforce_layers = 0
dont_support_bridges = 1
brim_width = 3
brim_separation = 0.15
skirts = 1
skirt_distance = 3
temperature = 240
first_layer_temperature = 230
bed_temperature = 85
first_layer_bed_temperature = 85
fan_always_on = 1
min_fan_speed = 30
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 3
cooling = 1
start_gcode =
end_gcode =
before_layer_gcode = G92 E0
layer_gcode = G92 E0
filament_start_gcode =
filament_end_gcode =
binary_gcode = 0
thumbnails =
thick_bridges = 0