rushabhcodes/fidget-counter

A modular enclosure assembly with a stationary base, tray, cell, PCB retainers, backing ring, magnets, and interchangeable snap-on rotor/grip caps in multiple styles.

Version
1.0.9
License
unset
Stars
0

mechanical/MECHANICAL_BOM.csv

Part,Quantity,Notes
Stationary_Base,1,PLA; unchanged two integral outward-release clips
Bottom_Tray,1,PLA; unchanged attachment-disc arrangement
PCB_Retainer_Print_4,4,PLA; existing PCB retaining washers
Selected Cap_*.stl,1 per style,Complete single-piece rotor/grip/pusher; no separate hub
Encoder magnet,1 per printed top,Diametrically magnetized diameter 5 x thickness 1.5 mm
Encoder spacer,1 per printed top,Nonmagnetic thickness0.2 mm above the disc
PCB screws,4,Existing M1.6 countersunk; size to measured post depth
Attachment magnets,24,Axially magnetized diameter 5 x thickness 1.5 mm; unchanged in fixed base
Backing ring,1,Existing steel ring; ID44.05 OD54.45 thickness0.7 mm
CR2032,1,In existing soldered bottom PCB holder
PCB and components,1,Existing inward SW1 draft at x0 y-5 mm