pixalynx/cm5-minimal-carrier
A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.
- Version
- 0.1.1
- License
- unset
- Stars
- 0
Files in (root)/references
- CM5_GPIO.kicad_sch
- CM5_HighSpeed.kicad_sch
- cm5-datasheet.txt
- cm5-mechanical.png
- CM5IO-README.TXT
- CM5IO-rev2.kicad_pcb
- CM5IO.kicad_sch
- EDAC 690-019-298-412.kicad_mod
- KICAD-LICENSE.md
- minima-comparison.json
- pinout-verification.json
- Raspberry-Pi-5-Compute-Module.kicad_mod
- REGISTRY-NOTES.md
- rt9742.pdf
- rt9742.txt
- tpd4e05u06.pdf
- tpd4e05u06.txt
- TSOT-23_HandSoldering.kicad_mod
- USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal.kicad_mod
- usb4105-spec.pdf
Related Packages
More from this authorpixalynx/edge-connectorConfigures USB-A, Micro-USB, and USB-C PCB-edge connectors with exposed copper contacts and automatically shaped, positioned board tongues.
Similar packagegokul/usb-hub-boardA 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.
Discover something newolivergrabinski/weather-stationA compact ESP32-S3 Wi‑Fi/Bluetooth module is powered by an AP2112K 3.3 V regulator, with a JST SH connector and blue status LED.