pixalynx/cm5-minimal-carrier
A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.
- Version
- 0.1.1
- License
- unset
- Stars
- 0
Files in (root)/output/fabrication-REVIEW
- cm5-minimal-B_Cu.gbl
- cm5-minimal-B_Mask.gbs
- cm5-minimal-B_Paste.gbp
- cm5-minimal-B_Silkscreen.gbo
- cm5-minimal-Edge_Cuts.gm1
- cm5-minimal-F_Cu.gtl
- cm5-minimal-F_Mask.gts
- cm5-minimal-F_Paste.gtp
- cm5-minimal-F_Silkscreen.gto
- cm5-minimal-In1_Cu.g1
- cm5-minimal-In2_Cu.g2
- cm5-minimal-job.gbrjob
- cm5-minimal-NPTH-drl_map.svg
- cm5-minimal-NPTH.drl
- cm5-minimal-PTH-drl_map.svg
- cm5-minimal-PTH.drl
- READ-BEFORE-ORDERING.txt
Related Packages
More from this authorpixalynx/edge-connectorConfigures USB-A, Micro-USB, and USB-C PCB-edge connectors with exposed copper contacts and automatically shaped, positioned board tongues.
Similar packagegokul/usb-hub-boardA 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.
Discover something newolivergrabinski/weather-stationA compact ESP32-S3 Wi‑Fi/Bluetooth module is powered by an AP2112K 3.3 V regulator, with a JST SH connector and blue status LED.