pixalynx/cm5-minimal-carrier
A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.
- Version
- 0.1.1
- License
- unset
- Stars
- 0
output/jlcpcb-cpl-REVIEW.csv
Designator,Mid X,Mid Y,Layer,Rotation
J1,5.000000mm,27.500000mm,Top,0
J2,39.000000mm,27.500000mm,Top,0
J3,60.360000mm,47.000000mm,Top,90
J4,56.990000mm,19.000000mm,Top,90
U1,48.000000mm,30.000000mm,Top,0
U2,50.000000mm,22.750000mm,Top,0
U3,50.000000mm,19.750000mm,Top,0
U4,49.000000mm,13.500000mm,Top,0
D1,52.000000mm,53.000000mm,Top,0
C1,54.000000mm,47.000000mm,Top,0
C2,7.000000mm,21.000000mm,Bottom,0
C3,10.000000mm,18.000000mm,Bottom,0
C4,44.000000mm,33.000000mm,Top,0
C5,47.000000mm,27.000000mm,Top,0
C6,8.000000mm,24.000000mm,Bottom,0
Related Packages
More from this authorpixalynx/edge-connectorConfigures USB-A, Micro-USB, and USB-C PCB-edge connectors with exposed copper contacts and automatically shaped, positioned board tongues.
Similar packagegokul/usb-hub-boardA 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.
Discover something newolivergrabinski/weather-stationA compact ESP32-S3 Wi‑Fi/Bluetooth module is powered by an AP2112K 3.3 V regulator, with a JST SH connector and blue status LED.