pixalynx/cm5-minimal-carrier
A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.
- Version
- 0.1.1
- License
- unset
- Stars
- 0
output/jlcpcb-bom.csv
Comment,Designator,Footprint,LCSC Part #
10164227-1001A1RLF,"J1,J2",cm5-1,C6782225
USB4105-GF-A,J3,usb-c,C3020560
690-019-298-412,J4,hdmi,C5291558
RT9742SNGV,U1,rt9742,C3235509
TPD4E05U06DQAR,"U2,U3,U4",esd,C138714
SMAJ5.0A-13-F,D1,sma,C87074
CL21A106KAYNNNE,"C1,C5",0805,C15850
GRM31CR61A476KE15L,C2,1206,C426659
CL05B104KO5NNNC,"C3,C6",0402,C1525
CL21B105KBFNNNE,C4,0805,C28323
Related Packages
More from this authorpixalynx/edge-connectorConfigures USB-A, Micro-USB, and USB-C PCB-edge connectors with exposed copper contacts and automatically shaped, positioned board tongues.
Similar packagegokul/usb-hub-boardA 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.
Discover something newolivergrabinski/weather-stationA compact ESP32-S3 Wi‑Fi/Bluetooth module is powered by an AP2112K 3.3 V regulator, with a JST SH connector and blue status LED.