pixalynx/cm5-minimal-carrier

A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.

Version
0.1.1
License
unset
Stars
0

output/drill-report.txt

Drill report for cm5-minimal.kicad_pcb
Created on 2026-09-18T22:49:44

Copper Layer Stackup:
    =============================================================
    L1 :  F.Cu                      front
    L2 :  In1.Cu                    in1
    L3 :  In2.Cu                    in2
    L4 :  B.Cu                      back


Drill file 'cm5-minimal-PTH.drl' contains
    plated through holes:
    =============================================================
    T1  0.200mm  0.0079"  (114 holes))
    T2  0.600mm  0.0236"  (4 holes)  (with 4 slots)
    T3  0.900mm  0.0354"  (4 holes)  (with 4 slots)

    Total plated holes count 122


Drill file 'cm5-minimal-NPTH.drl' contains
    unplated through holes:
    =============================================================
    T1  0.650mm  0.0256"  (2 holes))
    T2  2.700mm  0.1063"  (4 holes))

    Total unplated holes count 6